Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
4.5
4.5 LITIGATION\Authorize Supreme Court Action—Pontiff—6-1-2020 RESOLUTION AUTHORIZING COMMENCEMENT OF SUPREME COURT ACTION TO ENFORCE CODE AGAINST NON-COMPLIANT PROPERTY LOCATED AT 32 HOMER AVENUE RESOLUTION NO.: ,2020 INTRODUCED BY: WHO MOVED ITS ADOPTION SECONDED BY: WHEREAS, a fire occurred at a structure on property located at 32 Homer Avenue in the Town of Queensbury, identified as tax map no.: 302.8-1-31 (the "Property"), on or about July 14, 2019, and WHEREAS,Judy Pontiff is believed to be the owner of the Property, and WHEREAS, the Town of Queensbury's Director of Building and Codes Enforcement ("Director") has viewed the structure that was damaged by the fire and has found that there is no roof on the structure thereby leading to its further destruction and decay and presenting a hazard to anyone who should enter the Property and the public, and the structure is generally in disrepair, unusable and unsafe, and WHEREAS, the Director reports that he has provided letters dated August 7, 2019 and October 28, 2019 and communicated several times with Ms. Pontiff but despite the Director's reasonable efforts to bring about voluntary compliance, Ms. Pontiff has not adequately secured the Property, brought it into compliance with Town and State Code provisions or taken any measures to bring about compliance, and WHEREAS, the Property remains in an unsafe and unsecured condition, posing an imminent danger to the health and safety of the public, NOW, THEREFORE, BE IT RESOLVED, that the Queensbury Town Board hereby authorizes commencement of a Supreme Court Action to temporarily and permanently compel compliance with any and all applicable Town Code and State Code provisions together with a request for costs and expenses associated with litigation, and BE IT FURTHER RESOLVED, that the Supreme Court Action may be commenced against any and all persons having any legal interest in the Property and have any legal obligation to keep the Property in a safe and lawful condition including, but not necessarily limited to Judy Pontiff as well as any party believed by Town Counsel to be necessary for full resolution of this matter, and BE IT FURTHER RESOLVED, that the Town Board further authorizes and directs the Town's Budget Officer to arrange for payment of any Court and/or litigation costs related to this matter from the account(s) deemed to be appropriate by the Budget Officer, and BE IT FURTHER RESOLVED, that the Town Board further authorizes and directs Town Counsel to file any necessary documentation to commence such Court action and the Town Supervisor, Town Counsel, Director of Building and Codes Enforcement and/or Town Budget Officer to take any and all action necessary to effectuate all terms of this Resolution. Duly adopted this 1st day of June, 2020, by the following vote: AYES : NOES : ABSENT : 0.• TOWN OF OLLEENSBLIKY 742 Bay Road, Queensbury, NY. 12804-5902 August 7, 2019 Judy Pontiff 5 Sanford Lane Queensbury, New York 12804 Dear Judy, Your apartment building at 32 Homer Ave must be demolished and removed from the property as it is considered an unsafe structure. Specifically there is no roof on the structure leaving the structure open to the elements, which will lead to further destruction and decay of the structure. This letter will serve as final notice that a demolition permit must be submitted for and issued by September 1, 2019. An asbestos report must be filed with the building permit, a timetable for the removal of any asbestos should asbestos be found and total removal of the structure by September 15, 2019. If you fail to meet these timetables, I will ask the Town Board to take action and I will also issue a Court Summons for violation of Town Code Chapter 60 section 60-12 for every day the violation exists after September 15, 2019. Thank you for your anticipated cooperation. Sincerely, David Hatin Director of Building and Code Enforcement Town of Queensbury 518 761-8253 " Home of Natural Beauty ... A Good Place to Live " • LP." I4OPW TOWN OF TENS .,, 742 Bay Road, Queensbury, NY. 12804-5902 October 28, 2019, 2019 Judy Pontiff 5 Sanford Lane Queensbury, New York 12804 Dear Judy, Based on your phone call on today's date to me you stated you were not demolishing the structure at 32 Homer Ave. and abandoning the property to leave the structure and property in an unsafe condition. You further stated it would be up to the Town of Queensbury to demolish the structure. Your apartment building at 32 Homer Ave was ordered to be demolished on August 7, 2019 in a letter to you and that the structure must be demolished and removed from the property as it is considered an unsafe structure. Specifically there is no roof on the structure leaving the structure open to the elements, which will lead to further destruction and decay of the structure. By copy of this letter I am asking the Town Board to declare the structure a clear and imminent danger to the life, safety or health of any person or property, and authorize me per Chapter 60 section 60-11 to seek an immediate Supreme Court against you to cause you to demolish the structure at 32 Homer Ave. Should you have any questions please feel free to call me. Thank you for your anticipated cooperation. Sincerely, 1 w,� 4 46ft David Hatin Director of Building and Code Enforcement Town of Queensbury 518 761-8253 " Home of Natural Beauty ... A Good Place to Live " , :..,, p\ 4N\ UNTERNAToNA_ y O R FIN/507 S FA Sales Proposal For: TOWN OF QUEENSBURY Presented By: H. L. GAGE SALES, INC. INTERNATIONAL° April 20,2020 Prepared For: Presented By: TOWN OF QUEENSBURY H. L.GAGE SALES, INC. David Duell Jeff Prince 742 Bay Rd. 121 WASHINGTON AVE EXTENSION Queensbury,NY 12804-5902 ALBANY NY 12205- (518)762-8201 (518)456-8871 Reference ID: N/A Thank you for the opportunity to provide you with the following quotation on a new International truck. I am sure the following detailed specification will meet your operational requirements,and I look forward to serving your business needs. Model Profile 2021 HV507 SFA(HV507) AXLE CONFIG: 4X4 APPLICATION: Front Plow and Wing with Spreader MISSION: Requested GVWR:44000.Calc.GVWR:44000 Calc. Start/Grade Ability:27.39%/3.33%@ 55 MPH Calc. Geared Speed:72.7 MPH DIMENSION: Wheelbase: 169.00,CA:94.00,Axle to Frame:61.00 ENGINE,DIESEL: {Cummins L9 370}EPA 2017,370HP @ 2000 RPM, 1250 lb-ft Torque @ 1400 RPM,2100 RPM Governed Speed,370 Peak HP(Max) TRANSMISSION,AUTOMATIC: {Allison 3000 RDS}5th Generation Controls, Close Ratio,6-Speed with Double Overdrive,with PTO Provision, Less Retarder, Includes Oil Level Sensor,with 80,000-lb GVW and GCW Max, On/Off Highway CLUTCH: Omit Item(Clutch&Control) AXLE,FRONT DRIVING: (Mentor MX-18-120HR)Single Reduction, 18,000-lb Capacity,with Hub Piloted Wheel Mounting AXLE,REAR,SINGLE: {Dana Spicer S26-190D)Single Reduction,26,000-lb Capacity, Driver Controlled Locking Differential, R Wheel Ends Gear Ratio:5.57 CAB: Conventional,Day Cab TIRE,FRONT: (2)315/80R22.5 Load Range L HAU 3 WT(CONTINENTAL),480 rev/mile,68 MPH,All-Position TIRE,REAR: (4) 12R22.5 Load Range H HDR2(CONTINENTAL),479 rev/mile,75 MPH, Drive SUSPENSION,REAR,SINGLE: 31,000-lb Capacity,Vari-Rate Springs,with 4500-lb Capacity Auxiliary Multileaf Springs PAINT: Cab schematic 100WK Location 1:4421,School Bus Yellow(Std) Chassis schematic N/A 1 Proposal:8286-01 INTERNATIONAL° Vehicle Specifications April 20,2020 2021 HV507 SFA(HV507) Code Description List (US DOLLAR) HV50700 Base Chassis, Model HV507 SFA with 169.00 Wheelbase,94.00 CA,and 61.00 Axle to $99,791.00 Frame. 1ANB AXLE CONFIGURATION{Navistar}4x4 $0.00 Notes : Pricing may change if axle configuration is changed. 1CGE FRAME RAILS Heat Treated Alloy Steel(125,000 PSI Yield); 11.25"x 4.00"x $2,318.00 0.500"(285.75mm x 101.6mm x 12.7mm);480.8"(12212mm)Maximum OAL 1 LLA BUMPER, FRONT Swept Back,Steel, Heavy Duty $0.00 1WDS FRAME EXTENSION, FRONT Integral;20"In Front of Grille $590.00 1WGE WHEELBASE RANGE 148"(375cm)Through and Including 179"(455cm) $0.00 2ESP AXLE,FRONT DRIVING{Mentor MX-18-120HR}Single Reduction,18,000-lb Capacity,with $21,552.00 Hub Piloted Wheel Mounting Notes :Axle Lead Time is 120 Days 2WLC AXLE, FRONT DRIVING, LUBE{EmGard FE-75W-90}Synthetic Oil; 1 thru 29.99 Pints $147.00 3AGA SUSPENSION,FRONT,SPRING Parabolic Taper Leaf,Shackle Type,20,000-lb Capacity, $791.00 with Shock Absorbers 4091 BRAKE SYSTEM,AIR Dual System for Straight Truck Applications $0.00 Includes : BRAKE LINES Color and Size Coded Nylon : DRAIN VALVE Twist-Type :GAUGE,AIR PRESSURE(2)Air 1 and Air 2 Gauges;Located in Instrument Cluster : PARKING BRAKE CONTROL Yellow Knob,Located on Instrument Panel :PARKING BRAKE VALVE For Truck :QUICK RELEASE VALVE On Rear Axle for Spring Brake Release: 1 for 4x2,2 for 6x4 :SLACK ADJUSTERS, FRONT Automatic(with Air Cam Brakes) :SLACK ADJUSTERS, REAR Automatic(with Air Cam Brakes) :SPRING BRAKE MODULATOR VALVE R-7 for 4x2,SR-7 with relay valve for 6x4/8x6 4193 BRAKES, FRONT,AIR CAM 16.5"x 6", Includes 24 Sqln Long Stroke Brake Chambers ($1,368.00) 4619 TRAILER CONNECTIONS Four-Wheel,with Hand Control Valve and Tractor Protection $542.00 Valve,for Straight Truck Notes :When electronic stability control is ordered with trailer connections on a 4x2 truck,please check the operator manual for trailer weight restrictions. 4732 DRAIN VALVE{Berg)with Pull Chain,for Air Tank $0.00 4773 BRAKE SHOES, REAR Cast $1,021.00 4AZA AIR BRAKE ABS{Bendix AntiLock Brake System)4-Channel(4 Sensor/4 Modulator)Full $0.00 Vehicle Wheel Control System 4EBT AIR DRYER{Bendix AD-IP)with Heater $526.00 4ETG BRAKE CHAMBERS,FRONT AXLE{MGM}24 Sqln $47.00 4EXU BRAKE CHAMBERS,REAR AXLE{Bendix EverSure)30/30 Spring Brake $0.00 4LAA SLACK ADJUSTERS,FRONT{Haldex}Automatic $138.00 2 Proposal:8286-01 INTERNATIONAL' Vehicle Specifications April 20,2020 2021 HV507 SFA(HV507) Code Description List (US DOLLAR) 4LGA SLACK ADJUSTERS, REAR{Haldex}Automatic $188.00 4NDB BRAKES, REAR,AIR CAM S-Cam; 16.5"x 7.0"; Includes 30/30 Sq.In. Long Stroke Brake ($1,524.00) Chamber and Spring Actuated Parking Brake 4SPA AIR COMPRESSOR{Cummins}18.7 CFM $0.00 4VGG AIR DRYER LOCATION Mounted Inside Left Rail, Behind Transfer Case Mounting $70.00 4VGN AIR TANK Painted Aluminum,with Straight Thread 0-Ring Ports $432.00 4VKJ AIR TANK LOCATION(2)Mounted Under Battery Box,Outside Left Rail, Back of Cab, $91.00 Perpendicular to Rail 4WDU HAND CONTROL VALVE,AIR for Trailer Brakes,Omit Item $0.00 5708 STEERING COLUMN Tilting $125.00 5CAW STEERING WHEEL 4-Spoke; 18"Dia., Black $0.00 5PUD STEERING GEAR(2)(Sheppard M110/M90}Dual Power $1,159.00 6DHK DRIVELINE SYSTEM(Dana Spicer}SPL170 Main Driveline, 1710 Driveline to Transfer $612.00 Case, SPL140 Driveline to Front Axle, for 4x4 7BEU AFTERTREATMENT COVER Aluminum $278.00 7BLD EXHAUST SYSTEM Single,Horizontal Aftertreatment Device, Frame Mounted Right Side $1,588.00 Under Cab,for Single Vertical Tail Pipe, Frame Mounted Right Side Back of Cab,for All- Wheel Drive 7SDP ENGINE COMPRESSION BRAKE{Jacobs}for Cummins ISUL9 Engines;with Selector $2,132.00 Switch and On/Off Switch 7WAZ TAIL PIPE(1)Turnback Type $64.00 7WBU EXHAUST HEIGHT 11'6" $118.00 7WDN MUFFLER/TAIL PIPE GUARD(1)Aluminum $0.00 8000 ELECTRICAL SYSTEM 12-Volt,Standard Equipment $0.00 Includes : DATA LINK CONNECTOR For Vehicle Programming and Diagnostics In Cab :HAZARD SWITCH Push On/Push Off, Located on Instrument Panel to Right of Steering Wheel :HEADLIGHT DIMMER SWITCH Integral with Turn Signal Lever : PARKING LIGHT Integral with Front Turn Signal and Rear Tail Light :STARTER SWITCH Electric,Key Operated :STOP,TURN,TAIL&B/U LIGHTS Dual, Rear,Combination with Reflector :TURN SIGNAL SWITCH Self-Cancelling for Trucks,Manual Cancelling for Tractors,with Lane Change Feature :WINDSHIELD WIPER SWITCH 2-Speed with Wash and Intermittent Feature(5 Pre-Set Delays), Integral with Turn Signal Lever :WINDSHIELD WIPERS Single Motor, Electric,Cowl Mounted :WIRING,CHASSIS Color Coded and Continuously Numbered 8541 HORN, ELECTRIC(2)Disc Style $29.00 8695 SNOW SHIELD(2)Chrome;for Dual Air Horns $33.00 8718 POWER SOURCE Cigar Type Receptacle without Plug and Cord $30.00 8875 BATTERY TERMINALS Sealed $51.00 3 Proposal:8286-01 INTERNATIONAL'S Vehicle Specifications April 20,2020 2021 HV507 SFA(HV507) Code Description List (US DOLLAR) 8GXD ALTERNATOR{Leece-Neville AVI160P2013}Brush Type; 12 Volt 160 Amp.Capacity,Pad $0.00 Mount,with Remote Sense 8HAB BODY BUILDER WIRING Back of Day Cab at Left Frame or Under Sleeper, Extended or $100.00 Crew Cab at Left Frame;Includes Sealed Connectors for Tail/Amber Turn/Marker/Backup/ Accessory Power/Ground and Sealed Connector for Stop/Turn 8HXT HORN,AIR(2)Single Tone, Chrome,Roof Mounted,with Lanyard Pull Cord $413.00 BMJU BATTERY SYSTEM(Fleetrite)Maintenance-Free, (3)12-Volt 2850CCA Total,Top $282.00 Threaded Stud 8REA 2-WAY RADIO Wiring Effects;Wiring with 20 Amp Fuse Protection, Includes Ignition Wire $163.00 with 5 Amp Fuse,Wire Ends Heat Shrink and 10'Coil Taped to Base Harness 8RMV SPEAKERS(2)6.5"Dual Cone Mounted in Doors $48.00 8RPT RADIO AM/FM/VVB/Clock/USB Input/Auxiliary Input $368.00 8TME TRAILER CONNECTION SOCKET 7-Way,Mounted at Rear of Frame,Wired for Turn $439.00 Signals Independent of Stop,Compatible with Trailers with Amber or Side Turn Lamps 8TMH SWITCH,AUXILIARY Accessory Control;for Wiring in Roof,with Maximum of 20 amp Load $70.00 with Switches In Instrument Panel 8TNP AUXILIARY HARNESS 5.0'for Auxiliary Front Head Lights and Turn Signals for Front Plow $178.00 Applications 8VTR BATTERY BOX Aluminum,with Plastic Cover,2-4 Battery Capacity,Mounted Left Side $568.00 Perpendicular to Frame Rail,35"Back of Cab 8VZR SWITCH,BODY CIRCUITS,MID with Remote Power Module Mounted in Cab Behind Driver $790.00 Seat, Up to 6 Outputs&6 Inputs,Max 20 amp per Channel,Max 80 amp Total,Includes 1 Switch Pack with Momentary Switches 8WCK POWER SOURCE,TERMINAL TYPE 2-Post $39.00 8WDG BACK-UP ALARM{Preco 1059}Electronic;Solid State, Dual Function, 112 dBA $211.00 8WGL WINDSHIELD WIPER SPD CONTROL Force Wipers to Slowest Intermittent Speed When $42.00 Park Brake Set and Wipers Left on for a Predetermined Time 8WPH CLEARANCE/MARKER LIGHTS(5){Truck Lite}Amber LED Lights,Flush Mounted on Cab $0.00 or Sunshade 8WTL STARTING MOTOR{Delco Remy 39MT}12 Volt,Gear Reduced,with Thermal Over-Crank $193.00 Protection 8WWJ INDICATOR, LOW COOLANT LEVEL with Audible Alarm $0.00 8XAH CIRCUIT BREAKERS Manual-Reset(Main Panel)SAE Type III with Trip Indicators, $0.00 Replaces All Fuses 8XHD BATTERY DISCONNECT SWITCH 300 Amp, Disconnects Charging Circuits, Locks with $397.00 Padlock,Cab Mounted BXJE TURN SIGNALS,FRONT Dual Face,LED,Amber/Amber,Mounted on Top of Fender,Used $187.00 with Standard Flush Mounted Front Turn Signal,Side Marker Lamps,Parking Lights and Reflectors 9585 FENDER EXTENSIONS Rubber $104.00 9AAD LOGOS EXTERIOR Omit Model Badges $0.00 9AAH LOGOS EXTERIOR, ENGINE Badge Shipped Loose $0.00 4 Proposal:8286-01 INTERNATIONAL® Vehicle Specifications April 20,2020 2021 HV507 SFA(HV507) Code Description List (US DOLLAR) 9ANG HOOD, HATCH(01)for Servicing $444.00 9HBM GRILLE Stationary,Chrome $0.00 9WAC BUG SCREEN Mounted Behind Grille $131.00 9WBC FRONT END Tilting, Fiberglass,with Three Piece Construction, for WorkStar/HV $0.00 10021 CHASSIS COATING Corrosion Resistant E-Coat Primer Coating for Single Frame Rails $500.00 10060 PAINT SCHEMATIC, PT-1 Single Color, Design 100 $0.00 Includes : PAINT SCHEMATIC ID LETTERS"WK" 10761 PAINT TYPE Base Coat/Clear Coat, 1-2 Tone $0.00 11001 CLUTCH Omit Item(Clutch&Control) $0.00 12703 ANTI-FREEZE Red, Extended Life Coolant;To-40 Degrees F/-40 Degrees C,Freeze $0.00 Protection 12849 BLOCK HEATER, ENGINE 120V/1000W,for Cummins ISB/B6.7/ISUL9 Engines $98.00 Includes : BLOCK HEATER SOCKET Receptacle Type;Mounted below Drivers Door 12851 PTO EFFECTS, ENGINE FRONT Less PTO Unit, Includes Adapter Plate on Engine Front $353.00 Mounted 12EHY ENGINE,DIESEL{Cummins L9 370)EPA 2017,370HP @ 2000 RPM, 1250 lb-ft Torque© $12,889.00 1400 RPM,2100 RPM Governed Speed,370 Peak HP(Max) 12THT FAN DRIVE{Horton Drivemaster)Direct Drive Type,Two Speed with Residual Torque $0.00 Device for Disengaged Fan Speed Includes : FAN Nylon 12UWZ RADIATOR Cross Flow,Series System; 1228 Sqln Aluminum Radiator Core with Internal $0.00 Water to Oil Transmission Cooler and 1167 In Charge Air Cooler Includes : DEAERATION SYSTEM with Surge Tank : HOSE CLAMPS,RADIATOR HOSES Gates Shrink Band Type;Thermoplastic Coolant Hose Clamps : RADIATOR HOSES Premium, Rubber 12VAG AIR CLEANER Single Element,with Integral Snow Valve and In-Cab Control $352.00 12VHJ FEDERAL EMISSIONS{Cummins L9}EPA,OBD and GHG Certified for Calendar Year 2020 $0.00 12VXV THROTTLE,HAND CONTROL Engine Speed Control for PTO;Electronic,Mobile,Variable $0.00 Speed;(Range 2 to 20 MPH)Mounted on Steering Wheel 12WCG HOSE CLAMPS, RADIATOR HOSES{R.G. Ray Mini Flex Seal)Coil Springf'T"-Bolt Type, $54.00 for Radiator Hoses over 1"I.D. 12WZJ EMISSION COMPLIANCE Low NOx Idle Engine,Complies with California Clean Air $97.00 Regulations; Includes"Certified Clean Idle"Decal located on Driver Door 12XAT ENGINE CONTROL, REMOTE MOUNTED Provision for,Includes Wiring for Body Builder $45.00 Installation of PTO Controls;with Ignition Switch Control for Cummins ISB/B6.7 or ISUL9 Engines 5 Proposal:8286-01 INTERNATIONAL® Vehicle Specifications April 20,2020 2021 HV507 SFA(HV507) Code Description List (US DOLLAR) 13AVR TRANSMISSION.AUTOMATIC(Allison 3000 RDS)5th Generation Controls,Close Ratio, $6,226.00 6-Speed with Double Overdrive,with PTO Provision,Less Retarder, Includes Oil Level Sensor,with 80,000-lb GVW and GCW Max,On/Off Highway 13TKK TRANSFER CASE{Mentor MTC-4210}2-Speed, 10,000 lb-ft Torque Rating,Less PTO $18,870.00 Provision, Electric Over Air Control,with Lube Pump 13WDB TRANSFER CASE LUBE{EmGard 50W}Synthetic; 1 thru 14.99 Pints $0.00 13WDV OIL COOLER,TRANSFER CASE Remote Mounted Back of Cab $405.00 13WET TRANSMISSION SHIFT CONTROL Column Mounted Stalk Shifter $50.00 13WGH TRANSMISSION DIPSTICK Relocated to Right Side of Transmission $61.00 13WLP TRANSMISSION OIL Synthetic;29 thru 42 Pints $203.00 13WUC ALLISON SPARE INPUT/OUTPUT for Rugged Duty Series(RDS);General Purpose Trucks, $0.00 Construction 13WVV NEUTRAL AT STOP Allison Transmission Shifts to Neutral When Service Brake is $0.00 Depressed and Vehicle is at Stop; Remains in Neutral Until Service Brake is Released 13WYH TRANSMISSION TCM LOCATION Located Inside Cab $141.00 13WYU SHIFT CONTROL PARAMETERS{Allison)3000 or 4000 Series Transmissions, $0.00 Performance Programming 13XAA PTO CONTROL,DASH MOUNTED For Customer Provided PTO;Includes Switch,Electric/ $116.00 Air Solenoid, Piping and Wiring 13XAL PTO LOCATION Customer Intends to Install PTO at Left Side of Transmission $0.00 14AHL AXLE,REAR,SINGLE{Dana Spicer 526-190D}Single Reduction,26,000-lb Capacity, $3,473.00 Driver Controlled Locking Differential, R Wheel Ends.Gear Ratio:5.57 14SAL SUSPENSION, REAR,SINGLE 31,000-lb Capacity,Vari-Rate Springs,with 4500-lb $305.00 Capacity Auxiliary Multileaf Springs 14WMG AXLE, REAR, LUBE{EmGard FE-75W-90)Synthetic Oil;30 thru 39.99 Pints $198.00 15924 FUEL TANK STRAPS Bright Finish Stainless Steel $260.00 15DYP DEF TANK 9.5 US Gal(36L)Capacity, Frame Mounted Outside Left Rail, Under Cab $89.00 15LMR FUEL/WATER SEPARATOR{Racor 400 Series,)with Primer Pump,Includes Water-in-Fuel $0.00 Sensor 15LMV LOCATION FUELNWATER SEPARATOR Mounted Outside Left Rail,24"Back of Cab S50.00 15SJZ FUEL TANK Top Draw, Non-Polished Aluminum,26"Dia,80 US Gal(303L),Mounted Left $404.00 Side, Under Cab 16030 CAB Conventional, Day Cab $0.00 16564 HEATER SHUT-OFF VALVES(1)Ball Valve Type,Supply Line $69.00 16ATC AUTOMATIC CLIMATE CONTROL Automatically Maintains Cabin Comfort Based on $98.00 Selected Temperature 16BAM AIR CONDITIONER with Integral Heater and Defroster $923.00 16GDG GAUGE CLUSTER Premium Level;English with English Speedometer and Tachometer,for $488.00 Air Brake Chassis, Includes Engine Coolant Temperature,Primary and Secondary Air Pressure,Fuel and DEF Gauges,Oil Pressure Gauge,Includes 5 Inch LCD Color Display 6 Proposal:8286-01 INTERNATIONAL' Vehicle Specifications April 20,2020 2021 HV507 SFA(HV507) Code Description List (US DOLLAR) 16GHU GRAB HANDLE,CAB INTERIOR(2)Safety Yellow $33.00 16HHE GAUGE,AIR CLEANER RESTRICTION{Filter-Minder)with Black Bezel,Mounted in $30.00 Instrument Panel 16HKT IP CLUSTER DISPLAY On Board Diagnostics Display of Fault Codes in Gauge Cluster $0.00 16HLR VIRTUAL GAUGE,AIR APPLICATION Requires Premium Cluster $58.00 16HLS VIRTUAL GA,OIL TEMP,REAR AXLE Requires Premium Cluster $79.00 16JNT SEAT, DRIVER{National 2000}Air Suspension, High Back with Integral Headrest,Vinyl, $116.00 Isolator, 1 Chamber Lumbar,with 2 Position Front Cushion Adjust,-3 to+14 Degree Angle Back Adjust 16RPV SEAT, PASSENGER{National 2000}Air Suspension,High Back with Integral Headrest, $508.00 Vinyl,Isolated, 1 Chamber Lumbar,2 Position Front Cushion Adjustment,-3 to+14 Degree Back Adjust 16SDZ MIRROR,CONVEX, HOOD MOUNTED{Lang Mekra}(2)Right and Left Side, Bright,7.5" $190.00 Sq. 16SEE GRAB HANDLE, EXTERIOR Chrome,Towel Bar Type,with Anti-Slip Rubber Inserts, for $118.00 Cab Entry Mounted Left Side at B-Pillar 16SNN MIRRORS(2)C-Loop, Heated, Bright Heads, Black Arms,7.5"x 14"Flat Glass, Includes $206.00 7.5"x 7"Convex Mirrors,for 102"Load Width Notes : Mirror Dimensions are Rounded to the Nearest 0.5" 16VKB CAB INTERIOR TRIM Classic,for Day Cab $0.00 Includes :CONSOLE,OVERHEAD Molded Plasticwith Dual Storage Pockets,Retainer Nets and CB Radio Pocket; Located Above Driver and Passenger :DOME LIGHT,CAB Door Activated and Push On-Off at Light Lens,Timed Theater Dimming, Integral to Overhead Console,Center Mounted :SUN VISOR(2)Padded Vinyl;2 Moveable(Front-to-Side)Primary Visors,Driver Side with Toll Ticket Strap 16VSL WINDSHIELD Heated,Single Piece $632.00 16WEE CAB SOUND INSULATION Includes Dash Insulator and Engine Cover Insulator $90.00 16WHJ HOSE CLAMPS,HEATER HOSE{Breeze}Belleville Washer Type $25.00 16WJU • WINDOW, POWER(2)and Power Door Locks, Left and Right Doors, Includes Express $367.00 Down Feature 16WLS FRESH AIR FILTER Attached to Air Intake Cover on Cowl Tray in Front of Windshield Under $76.00 Hood 16WSK CAB REAR SUSPENSION Air Bag Type $0.00 16XCV COVER PLATE Blank Steel Cover Plate in Place of Storage Bin for Customer Mounting $25.00 Requirements 16XJN INSTRUMENT PANEL Flat Panel $0.00 16XWJ WINDSHIELD WIPER BLADES Snow Type $30.00 16XVVY WINDSHIELD WASHER RESERVOIR Mounted Under Cab with Remote Fill Mounted $61.00 Behind Cab Drivers Side 7 Proposal:8286-01 INTERNATIONAL' Vehicle Specifications April 20,2020 2021 HV507 SFA(HV507) Code Description List (US DOLLAR) 16XXC COWL TRAY LID $200.00 16ZBB ACCESS,CAB{Bustin)Aluminum, Driver&Passenger Sides,Two Steps per Door,for use $777.00 with Day Cab or Extended Cab, Self-Cleaning 27DPN WHEELS, FRONT{Accuride 29039)DISC;22.5x9.00 Rims, Powder Coat Steel,5-Hand $224.00 Hole, 10-Stud,285.75mm BC, Hub-Piloted, Flanged Nut,with Steel Hubs, Non-Standard Offset,with.5"Thick Disc 28DUK WHEELS. REAR(Accuride 29169)DUAL DISC:22.5x8.25 Rims, Powder Coat Steel,5- $127.00 Hand Hole, 10-Stud,285.75mm BC, Hub-Piloted, Flanged Nut,with.472"Thick Increased Capacity Disc and Steel Hubs 29597 WHEEL SEALS,REAR{Stemco Voyager)Oil Lubricated Wheel Bearings $76.00 29598 WHEEL SEALS, FRONT{Stemco Voyager}Oil Lubricated Wheel Bearings ILO Standard $59.00 Oil Seals 29WAP WHEEL GUARDS,FRONT{Accuride}for Metric Hub Piloted Wheels with Flanged Mounting $24.00 Nuts Mounted Between Hub and Wheel 29WAR WHEEL GUARDS,REAR{Accuride}for Metric Hub Piloted Wheels with Flanged Mounting $24.00 Nuts,Mounted Between Hub&Wheel and Between Dual Wheels 7382155423 (4)TIRE, REAR 12R22.5 Load Range H HDR2(CONTINENTAL),479 rev/mile,75 MPH, $768.00 Drive 7792545437 (2)TIRE,FRONT 315/80R22.5 Load Range L HAU 3 WT(CONTINENTAL),480 rev/mile, $700.00 68 MPH,All-Position Total of Product Features $189,178.00 Services Section: 40128 WARRANTY Standard for HV507.HV50B,HV607 Models.Effective with Vehicles Built July $0.00 1,2017 or Later,CTS-2025A 40SZD SRV CONTRACT,EXT CMS ENG/AFTR{Cummins)To 60-Month/100,000 Miles(160,000 $4,380.00 km), Extended Cummins L9 Engine Coverage, Protection Plan 1 and Aftertreatment Total of Service Features $4,380.00 Total List Price Including Options: $193,558.00 1 Dump,plow,and wing Zwack Inc. $99,889.00 Total Body Allied: $99,889.00 6.9k5 3,'70 3�as� C,rnccis g L/SJ 99, 79/-a' K. 7U g93F Lls: �, « )C Yes cif �s CjA 9C eovv Ago rau ►Prn6,Ji , 14/ 6,0 I'ylo, D,e 1GYl OGU in.G� 13NG/.v6 fiF72 :Mari AAi7Y ` c ,1 gea ,9117 �}ua,��vNg� v.��7'�f3cl' ../t SG o�t�.r 8 Proposal:8286-01 gZ. / )c6- V Li ,r ,ecD . A 19,2 39.71 DATE 4/17/2020 ZWACK INC. RTE 22 Quote #:20073A STEPHENTOWN NY 12168 TELEPHONE 518-733-5135 JOB # FAX 518-733-6135 QUOTATION CUSTOMER :TOWN OF QUEENSBURY :HWY DEPT 742 BAY ROAD :QUEENSBURY :NY ZIP :12804 DELIVERY / / CUSTOMER TEL. 518-761-8211-EXT-0000 Y DESCRIPTION PRICE EVEREST SDS1OSS3039 ALL SEASON STAINLESS BODY (SIDE DUMP) , RHS132TML45SH PLOW, w132 WING, 142,698.00 142,698.00 CARBIDE CUTTING EDGES ON PLOW & WING, PT PLOW HITCH, ACP48/ACP48/ST/62 WING SYS, 8" SS SPREAD APRON, LEFT SIDE COAL DOOR, AIR GATE, PIONEER EDD 1500AL ASP TARP W/ANTI SAIL BAR, REXROTH PRESSURE COMP HYD SYS, COMPU SPREAD CS550, REAR POLY FENDE RS, LED WING & SPINNER LIGHT, POST MOUNTED LED MINI LIGHT BAR, BODY UP ALARM, WHELEN LED DOT BODY WARNING LIGHT SYS, HEATED LED PLOW LIGHTS, DEL CAB AIR CONTOLS, 24 TON PINTLE HITCH W/CHIPPE R BAR, PPG UNDER BODY PAINT, SUMMER FLOOR INSERT HEAVY DUTY SCREENS, COMPLETE INSTALLATION ROAD WATCH TEMP SYSTEM ONONDAGA BID REF 8996 30% DISCOUNT 42,809.00- 42,809.00- TOTAL $99,889.00 Done By : The intent of this document is to describe in detail a 10 foot long dump body spreader with left side front discharge, which can be used both as a conventional dump body and a material spreader which spreads material in front of the driven axle for superior traction. Length 10' Interior width: 86" Exterior width: 96" Approximate weight: 9=5,300 Lbs, 10= 5,700 Lbs, 11 = 6,100 Lbs Headboard: Flat one-piece front with a bolt on conveyor drive unit. It shall be fabricated from 3/16"thick 304 grade stainless steel. It also shall have two external vertical braces and a horizontal box brace, all of stainless material. Body Hoist: The hoist cylinder is a multiple stage telescopic hoist designed for salt spreader body applications with a floating trunnion cylinder pivot mounted in removable bearing blocks, floor line attachment point to minimize cylinder space requirements. The standard cylinder shall be 4.5"bore with 100" stroke and shall be single acting. The rear hinge shall be fabricated with a base angle of 4" x 4"x 3/8" structural angle. Two 3"thick hinge ears pivoting on 2" diameter pins shall in turn be welded to the body. All pivot points shall have lubrication points. Floor: Live action type 1/4"400-F steel floor with 45-degree ramp to the right side. The right inner side and inner headboard shall be 3/16"(07 ga.) Corten plate adequately braced. Floor and right inner sidewall shall rotate as one unit and are hinged at the left side conveyor tray. It shall be capable of 40 degrees of lift through two (2)4" dia. by 16"stroke double acting cylinders. There shall be three hinges bolted to both the left side longsill and to the tilting floor assembly. The hinges shall have stainless steel pins and shall have lubrication points. The floor assembly shall be of heatable design with 3/16"plate boxed bracing below the floor plate.The bolt in upper conveyor tray shall be of/4"thick abrasion resistant steel. An adjustable polymer wiper shall be attached to the inner headboard to lessen spillage. A two-piece hinged conveyor cover shall be bolted to the left side and protect the conveyor chain during non-spreading operations. The conveyor covers shall be of 3/16"400-F plate. There shall be safety props supplied to support both the tilt floor and/or the entire body during maintenance operations. Sub-Frame: The sub-frame shall consist of two longitudinal channels of 8" depth at 13.75 lbs per foot, supporting 4 tubular crossmembers. At the rear shall be a full width stainless steel bumper plate (rear skirt) 10" deep. The sub frame shall be adequately braced and shall carry the two tilt floor lift arm assemblies. The pivot points shall have lubrication ports. Sides: 1 One piece 304 stainless plate with formed box section top and bottom longitudinal rails, one vertical rear post, front and rear board pockets to accept a 1-3/4"thick plank. Material shedding 45- degree lower rub rails standard. There shall be one front post and two side posts (7") standard. The sides shall be 30" high. The right side of the body has a fixed outer side that provides the required rigidity for dump body use mode. Right side board pockets move with the inner floor assembly. Tailgate: One-piece skin plate of 07ga. 304 stainless with perimeter box reinforcement six panel bracing horizontal intermediate stiffener plus lower rub rail material shedding design all of lOga. 304 stainless. The tailgate shall be capable of three-way action standard (dump, spread, load). 3/8" spreader chains shall be standard with two chain hooks per side standard (attached to rear post). It shall have standard'/"thick hinge ears with 1-1/4"diameter galvanized handle pins with 1- 1/4"diameter lower latch rods. The tailgate shall be 39"high. There shall be a lift point at the top center. Tailgate Locking Mechanism: Air tailgate locking mechanism standard attached to a 1"dia. full width traverse rod with four bearing points. Positive action lock cam latches give a"double"lock action,rear latches independently adjustable. 1/2"plate latch ears with 1/2"flame cut lock finger. Manual handle operation is optional. Conveyor: Left side longitudinal conveyor emptying to the front. The conveyor tray shall be bolted to the sub-frame. Full-length conveyor cover(two section) hinged to fold and latch to the side. The conveyor tray shall be formed from 1/4" SS plate. The conveyor chain shall be 667x pintle type 18"wide with 3/8"x 1-1/4"flutes every second link(double bar type). The conveyor chain shall be driven by a 25: 1 worm gear reducer with a 5.9 cubic inch hydraulic motor. There shall be a 1- 3/4"diameter front drive axle shaft carrying 8-tooth sprockets and a 1-1/4"rear idler shaft with sealed ball bearings. There shall be a rear mounted manual chain tensioner comprised of two grease cylinders. The body shall have a guillotine type flow control door mounted on the headboard with infinite adjustment through a range of 8". There shall be a chassis mounted polymer chute feeding to a 6-flute 18"diameter steel spinner driven by an independent 3.0 cubic inch hydraulic motor. The polymer chute shall be capable of windrowing spread material to the road center by rotating 90 degrees.The spinner drive shall be chassis mounted and adjustable through three axes, lateral, longitudinal and vertical. Polymer spinner disc is optional. There shall be a bolt on lower chain return tray included. Hydraulics: The box shall be fully plumbed for both conveyor drive and side lift cylinders. STAINLESS STEEL hydraulic line shall be used where feasible for durability on longitudinal lines. The two side lift cylinders shall be connected thru a divider valve to maintain a level lift. There shall be a relief valve provided for the down stroke (floor lowering)operation. Hydraulic lines plumbed to the rear hinge area. 2 Options: 24"cab shield (standard) Air tailgate control (standard) 8" spreader apron 304SS (standard) Central grease line system Two oval lights cut outs in rear body corners, one for emergency flashers, one for additional stop/tail/turn lights for grommet light mounting. Stainless steel fold up ladders SDS section hinged screen package with lifting ring in center of screen. There shall be a stainless steel lift cable or welded D-ring provided for removal of screen and proper rigging so not to interfere with operation. There shall be a removable summer floor insert supplied with the body, The insert will oak cushion with 1/4 AR steel plate mounted on top. Floor shall be held in body with removable bolts on each side. REVERSABLE TRIP MOLDBOARD PLOW RHS132TML45SH Moldboard shall have a 60 degree attack angle standard but permit alternate settings At the•60 degree angle, dimensions are: Length: 132" overall Height: 45" measured at top of 1 curl, at skin plate Surface, vertically to the ground Overhang from the skin edge to the blade/ground contact Shall be 13.75" Moldboard shall consist of a steel framework supporting a one piece 10 gauge steel skin late, designed for high speed plowing with minimal blow back of snow Moldboard skin shall be brake formed for extra rigidity Framework shall consist of ten 3/8" thick by 3.5" deep steel flame cut ribs and a base angle of 5 by 3.5 by 5/8" angle Base angle shall be gusseted between shoe locations and standard blade bolt pattern a.a.s.h.o. (12" centers),c-1085 steel 1/2" x 8" x 132", reversible for wear There shall be two moldboard shoes behind the blade and a curb shoe on each end Push frame shall attach at four points evenly spaced, on a 1.25" diameter pins, through dual ribs Pin shall have 1.50" thick bearing area at each location, Moldboard shall have two lift points Push frame of modular design allowing choice of reversing methods(hydraulic cylinders, gear reverse or manual pin lock)without modification to the push frame build. Shall allow angling to 3 35 degrees either side of center Reversing frame shall have a main beam of 6" by 4" by 1/2" Hss tube reinforced by a full width sector of 4" x 4" x 1/2" structural angle, gussetted at stress points and pivoting about a 2 1/2" diameter 100,000 psi steel pin 1/2" diameter lift chain supplied standard Four moldboard attached ears, on 33" centers of 3/4" thick flame cut steel with 1 1/4" diameter pins A-frame is fabricated from 3/8" plate reinforced with 4" x 4" x 1/2" angle. Oscillator base of I" plate with 1 1/4" diameter pivot bolt Oscillator bar has a base of 1" by 5" flat bar, 1" thick flame cut attached ears, reinforced by 1/2" x 2" flat bar. End hooks of 3/4" thick material to restrain a-frame oscillations Hydraulic cylinder reversing kit will have two 3" x 16" double acting cylinders protected by a double circuit pressure relieving valve, complete with quick connect hose connectors Cylinders shall have hard chromed rods or nitrided rod surfaces. Specify Front plow shall have a carbide cutting edge. W-132 WING The wing shall be designed for the right side of the truck and shall be heavy duty. It shall have an overall length of 132" and shall have a 120" x 6" x 1/2" cutting edge. The nose height shall be 32" and the discharge height shall be 32-39". The cutting edge backer angle shall be 4" x 6" X 5/8" with gussets and shall be punched to accept 3" - 3" - 12" - 12" cutting edges. Welded to this backer angle shall be a minimum of five 3/8" ribs. The leader shall be minimum of 1" plate steel and shall have two holes to accept a 1 1/4" wing bolt. The top of the ribs shall be welded to a 3" x 3"x 3/8" tube running the full length of the top of the wing. The wing skin shall be 10 gauge steel. There shall be several places longitudinally at the back of the wing to allow the push arms to be attached at the proper angle. To be painted orange. Wing shall have carbide cutting edge. POWER TILT HITCH MODEL PT-3A0588 Heavy duty truck mounted snowplow hitch designed for extreme use and to support and distribute the load stresses incurred while using single wing systems. This hitch is intednded for chassis requiring the tilt forward feature for engine access. The front mast powers both up and down to allow easy engine compartment access through the insertion and/or removal of three handle pins and is controlled by the lift arm cylinder The front mast is constructed of 4" x 4" x 1/2" angle vertical members reinforced by 5/8" x 9" plate ribs, itersected by a 4" x 4" x 1/2" horizontal top angle, a 4" x 4" x 1/2" cylinder base angle, 4 and by a 3" x 2" x 1/4" base to the plow pin points are on 31" centers with three 1 1/4" diameter pin locations The lift arm is fabricated from 1" flame cut steel plate, baced with two 1/2" x 2" steel flatbars welded to the main am There shall be minimum 17.50" lift using a 4" bore by 14" sroke industrial quality double acting piston type cylinder hying a chromed rod. The lift arm shall have a triple pint chain hook The front mast shall be pinned to a mast support frame with four 1 1/4" steel pins. The support frame is in turn welded to a 5/8" steel bumper plate and can be adjusted in height to accommodate various chassis frame heights and models Front bumper plate shall be bolted to the chassis frame through two front frame brackets of 1/2" steel plate and two lower cheek plates of 5/8" steel plate that reach back on the frame rail to evenly distribute load stresses. The bumper is designed to allow sufficient room for pump Mounting Hitch shall allow for the use of wing systems without modification to the hitch Hitch shall permit the use of mechanical coupler type plow attachments ACP48 WING SYSTEM Leveling wing system 48" (all hydraulic) 1 front tower: shall be box section design totally enclosing the wing lift cylinder. 2 front tower shall be bolted to hitch cross tubes. 3 tower to be easily removable for the off season. 4 slide tray: 8" structural i-beam @ 18.4 lbs./ft. 5 slide track: 3/4" square bar full length. 6 tower structure: three slided box section formed from 1/4" plate welded to rear of slide tray to form cylinder enclosure. 7 internal bulkhead at stress points. 8 the slide control cylinder is vertically mounted and is connected to the slider at the top of the slide unit. 9 slide control cylinder: 3" bore x 48" stroke, double acting with nitrided piston rod. The rod diameter is 2". 5 10 slider: base plate of 3/4" x 7" plate x the height of the tower. 11 the front wing pivot "dee" attaches to the slider with a 3/4" plate section. 12 the wing dee will be the "safety trip" model, having a 1 1/2" diameter grade 5 wing mounting bolt with slotted hex nut and cotter pin. 13 travel: 48" 14 cross-tubes: two hss sections mounted horizontally to connect the front tower to the front hitch. The hss section is 6" x 4" x 3/8" wall. acp48 rear tower: (fully hydraulic) 15 rear tower: shall be of box section design totally enclosing the wing lift cylinder. 16 rear tower shall have bolted connection to rear saddle to allow for various frame heights and off-season emoval without disturbing the hydraulic system. 17 tower shall have 25 degree angle to the frame to align pusharms to the wing. 18 slide tray: 8" structural i-beam @ 18.4#/foot. 19 slide track: 3/4" square bar full length of travel,two pieces. 20 tower structure: three sided box section formed from 1/4" plate welded to rear of slide tray to form cylinder enclosure. 21 the slide control cylinder is vertically mounted and is connected to the slider at the top of the slide unit(@ extreme top of tower) 22 slide control cylinder: 3" diameter bore x 48" stroke double acting with nitrided piston rod. The rod diameter is 2" diameter. 23 wing control cylinder: 3" diameter bore x 24" stroke double acting with 2" diameter nitrided piston rod. 24 this cylinder is mounted to operate in conjunction with the wing arms forming a 2 point pivot through which the wing is operated. 25 slider: base plate of 3/4" x 7" plate x the height of the tower. 26 the wing arms attach to 3/4" thick double arm mounting ears carrying 1 1/4" diameter grade 5 plated bolts with nylok nuts. 27 travel 48" 28 oil tank: 35 us gallon capacity with baffle, breather sight gauge and magnetic drain plug. Fabricated from 7 gauge plate with 3/8" "c" section end stands. Tank is bolted to rear saddle for 6 ease of cleaning. Rrear saddle: a laterally mounted hss section of 6" x 4" x 1/2" wall thickness, forms the basis of the structure. "1" shape cheek plates with tower end gusseted to form a box with the tower attach bracket. 29 pipe struts supplied to stabilize the tower base. The mounting framework for the rear tower is set at 25 degrees off the chassis centerline to position the tower slider assembly parallel to wing plow during operation. 30 safety trip front section: trip "dee" incorporates a 1" diameter torsion trip spring. 31 wing arms: the upper wing arm incorporates a 5/8" diameter wire tension trip spring. 32 the outer section section is 3" schedule 80 tubular section with a wall thickness of.300" 33 the inner section is 2/34" inch diameter solid bar. 34 the upper wing arm has a sliding cylinder connecting lug that functions to lift the wing and also provides for vertical wing "float" to allow the wing to follow the road shoulder contours. 35 the lower wing arm incorporates a 5.8" wire compression spring to create a shock absorber effect for the wing plow. 36 the outer section is 2 1/2" schedule 80 tubular section with a wall thickness of.276". 37 the inner section is 2 1/4" diameter solid bar. 38 universal joint connectors are located at each end of both wing arms. Apron, 7 ga,8" b/o there shall be a removable spread apron. Coal door There shall be a door mounted on the left side of the body tailgate. Pioneer EDD 1500DAL (automatic) 8-11' tarp w/anti sail bar Central hydraulic system specifications Hydraulic pump The front mounted flow and pressure compensated pump shall be driven direct and in-line with the crankshaft through a double universal joint driveline. The hydraulic pump must be of piston type and capable of 37 GPM at 2000 engine RPM. Pressure sense line must be internally bled at the pump. Pump case drain must be plumbed directly to reservoir-not through return line filter. 7 Low Oil Shut Down: A single normally open, two position, two way poppet type solenoid valve must be mounted directly to the hydraulic pump discharge port in such a way as to stop all oil flow to the hydraulic system when energized. The solenoid valve must be wired directly to an in tank mounted level indicator. The level indication shall be of the float type and mounted from the top of the reservoir. When the float switch contacts close,the shut-down valve blocks pump flow and an annunicator on the main control will be activated. The momentary switch shall be mounted on dash board for low oil shut-down override. This switch shall be wired in such a way as to de-energize the system shut-down to facilitate fault finding and equipment stopping. DRIVELINE The hydraulic pump is to be driven by a 1310 series driveline off the engine harmonic balancer which must accept a 1350 series flange yoke. The driveline can have no more than a 4 degree operating angle and must be assembled with proper slip movement. HYDRAULIC VALVING Central hydraulic system valving shall be of mobil design made to withstand exposure to de- icing chemicals and severe weather conditions without the use of a watertight enclosure. It shall be of cast iron construction-horizontally stackable and serviceable without disassembly. Each section must have a built-in flow and pressure compensator,to allow simultaneous operation regardless of any other system function. HYDRAULIC RESERVOIR Hydraulic reservoir to a minimum of 30 gallon capacity. The reservoir must be baffled,have a magnetic drain plug, pressurized breather cap and a suction strainer with a minimum 2" NPTF outlet. Reservoir shall also have an electrical low lever indicator. FILTRATION A 10 micron filter must be installed in the return line of the reservoir. The filter assembly must have a 25 PSI bypass and an element condition indicator. HYDRAULIC LINES AND PLUMBING All hydraulic lines, pipes,hosed, and fitting shall be of sufficient capacity to accommodate the volume of oil without undue hating or turbulence in the system. A 2" suction line with a minimum SAE rating of 100-R4 must be used between the reservoir and the inlet of the pump. All of the pressure hosed, including the signal sensing line to the pump must have swivel fittings on both ends and have a minimum SAE rating of 100-R2. Return lines and the case drain line must have a minimum SAE rating of 100-R1. Hydraulic lines shall be routed to minimize interference with equipment and chassis components requiring periodic servicing. Appropriate support brackets, grommets, and ty-raps shall be provided to protect lines from abrasion, cutting and impact damage. Hoses shall not be installed near manifold or exhaust pipes so as to be affected by extreme heat. There shall be no pipe fittings used with any high pressure lines. Any and all hydraulic quick disconnect couplings used for spreader system and snow plow reversing system shall be of the bulkhead mounted style and rigidly attached without the use of any hose 8 clamp arrangements (loose hose ends are not acceptable). Dust cap for male ends and dust plug for female ends must be attached to couplers. Maximum distance allowed between support clamps on all hydraulic hoses shall be approximately 24". CS-550 LITE Spreader Control: The CAN Bus spreader control system shall be ground speed orientated to maintain a pre- determined application rate regardless of vehicle speed. Control shall be by microprocessor for high control accuracy with the outputs being current compensated. In order to ensure there will be no electrical interference either to or from the controller, any controller bid shall comply with the following standards: ISO 11452-2(2004-10) for RF Immunity ISO 11452-4(1996) for RF Immunity ISO 7637-2(2004) for Conducted Immunity ISO 7637-2(2004-06) for Transient Emissions Controller shall comply with ISO 16750-5 for Resistance to Media. (resistance to spills of coffee, soda etc.) The controller shall be capable of operating in Manual,Automatic (Closed Loop), Open Loop, Ground Speed Triggered Manual and 12V triggered modes. Controller shall have a 7"wide VGA touch screen display with 262144 colors. The display shall be a glass/film/glass design with a hardness of 7H. The display shall have adjustable brightness with the maximum brightness being no less than 400 cd/m2. The display shall include a 1.5 watt speaker that announces rate changes,pause and blast. The controller shall be capable of having 4 different solid material calibrations,4 different prewet liquid calibrations and 4 different anti-ice material calibrations for a total of 12 different materials. Each material shall have 9 programmable application rates. Controller shall have 3 detented rotary knobs for application rate selection. Each knob shall have stainless steel shafts and have a rotational torque of at least 8 oz-in. The controller shall be capable of operating Auger/Conveyor, Spinner,Pre-Wet, Anti-Ice, Cross Conveyor,Air Gate, Closed Loop Gate and Spinner Chute control. It must be capable of operating the Spinner, Auger/Conveyor, Pre-Wet, and Anti-Ice all at the same time. The Controller shall have the following features: 9 GPS Compatible: The controller, as supplied, must be capable of passing data logging information directly to an external GPS system without having to purchase additional equipment from the spreader controller manufacturer. Temperature Read Back and Temperature Compensation: The controller shall be capable of displaying both road temperature and ambient air temperature on screen when an external temperature sensor is used. The controller shall be capable of automatically increasing the application rate in response to decreasing road temperature. The rate at which the controller increases the application shall be adjustable in the controllers programming. Onboard Wi-Fi and GPS Info: The controller shall have built-in Wi-Fi and GPS for optional data downloading. This requires optional Wi-fr and GPS antennas.Also requires municipalities router and IT set-up of router along with internal municipal IT support; if this option is used. Auto Nulling: The controller shall be capable of auto nulling spinner, conveyor/auger and liquid channels when feedback sensors are used. Manual Nulling must be available for all circuits including cross conveyor left and right. System Programming: Programming shall only be accessed by use of an encrypted USB key. All programming shall be done by using the touch screen display. The touch screen display shall have a pop-up keyboard for easy entering of information. Material Set Back: When using liquid to pre-wet granular material the controller must be capable of cutting back the granular material by a predetermined percentage when the liquid is being applied. The percentage shall be programmable. Trip Summary Information: The driver must be able to access a trip summary screen that will show them miles traveled and material spread quantities. This information shall also be stored in the controller and used to calculate season totals. On Screen Error Code Log: For ease of troubleshooting, the controller shall have an on screen error log that is capable of displaying any error codes that have been generated. The error log shall not clear itself when the controller is powered off. Data Logging: The controller, as supplied, shall be capable of event based data logging such as Event time, Date, Material set-point and usage amounts, Spinner set-point,Pre-Wet set-point and usage amounts, Blast distance and amount used, Pause distance, Gate Setting,and Road Temperature. All the information will be transferred from the spreader control to a desktop/laptop computer via USB drive. All data logging information must be capable of being customized and exported. 10 Summation reports are not acceptable. SPECIAL OPTIONS Rear poly fenders Led light for wing& spinner Body up alarm & indicator Post mounted mini light bar Road watch temp system. EMERGENCY LIGHTING SYSTEM: Mounting and wiring of Whelen Emergency Lighting LED Whelen 500 series light heads. Four(4) Front and Two (2) Rear LED head assemblies, Whelen 500 Series Super Linear LED Light Head Model #5VA02ZCR mounted in rubber grommets in oval cut out in body corner posts. Lights to be wired to chassiss supplied switch and labeled. Stop/tail/turn lighs shall be installed in rear post(Whelen 50ROOXRR RED) Clear LED back up light shall be installed in rear post or under body LED back up lights. LED Snow Plow lights-HEATED LED plow light, solid state light that can withstand shock and vibration. LED light climates EMI with 50,000 hrs. Metalized reflector to contol exact light pattern. Pedestal mount with full adjustment utilizes corrosion resistant aluminum housing to dissipate heat. Impact polycarbonate lenses protects lenses from damage. Cab Pneumatic Controls There shall be direct mounted air cylinders on each valve section with fine proportional control of the spool. All connections shall be total enclosed with no moving parts exposed. Inside the cab shall be a 4 way compensating air valve. This shall provide metering action of each pneumatic shift cylinder mounted on the valve section. There shall be a air protection valve and a filter&lubricator to protect all pneumatic controls. Each valve section shall be color coded for ease of service. All controls shall be mounted in a custom tower with no exposed air lines in the cab. 24.5 TON PINTLE HITCH BP760 Pintle hitches include 1/2" mounting plates with two "D" rings drop forged. w/chipper bar PPG ERP-420-1 & ERP-201-1 Epoxy Coating. Under side of body, frame, and plow equipment shall be painted with PPG AUE-370-FG-1 11 .\--•., 3'\ ,:iNTERNATIONA Hv513 sFA Sales Proposal For: TOWN OF QUEENSBURY Presented By: H. L. GAGE SALES, INC. INTERNATIONAL' April 14,2020 Prepared For: TOWN OF QUEENSBURY Presented By: David DueII H. L. GAGE SALES, INC. 742 Bay Rd. Jeff Prince Queensbury, NY 12804-5902 121 WASHINGTON AVE EXTENSION (518)762-8201 ALBANY NY 12205- Reference ID: N/A (518)456-8871 Thank you for the opportunity to provide you with the following quotation on a new International truck. I am sure the following detailed specification will meet your operational requirements,and I look forward to serving your business needs. 4- Model Profile 2021 HV513 SFA(HV513) AXLE CONFIG: 6X4 APPLICATION: Front Plow and Wing with Spreader MISSION: Requested GVWR:66000.Calc. GVWR:66000 Calc. Start/Grade Ability:38.08%/3.12%@ 55 MPH Calc. Geared Speed:68.0 MPH DIMENSION: Wheelbase:215.00, CA: 131.50,Axle to Frame:55.00 ENGINE,DIESEL: (International A26)EPA 2017,475HP @ 1700 RPM, 1700 lb-ft Torque @ 1000 RPM,2100 RPM Governed Speed,475 Peak HP(Max) TRANSMISSION,AUTOMATIC: {Allison 4500 RDS}5th Generation Controls,Wide Ratio,6-Speed with Double Overdrive,with PTO Provision, Less Retarder,Includes Oil Level Sensor,On/Off Highway CLUTCH: Omit Item(Clutch&Control) AXLE, FRONT NON-DRIVING: {Mentor MFS-20-133A)Wide Track, I-Beam Type,20,000-lb Capacity AXLE, REAR,TANDEM: {Mentor RT-46-164EH}Single Reduction, Standard Width,46,000-lb Capacity, Driver Controlled Locking Differential in Forward-Rear and Rear-Rear Axle,200 Wheel Ends Gear Ratio:5.63 CAB: Conventional,Day Cab TIRE,FRONT: (2)425/65R22.5 Load Range L HAC 3(CONTINENTAL),465 rev/mile,68 MPH,All-Position TIRE,REAR: (8) 11R22.5 Load Range H HDR2(CONTINENTAL),491 rev/mile,75 MPH, Drive SUSPENSION,REAR,TANDEM: {Hendrickson HMX-460-54)Walking Beam,46,000-lb Capacity, 54"Axle Spacing, Rubber Springs,with Transverse Torque Rods, Rubber End Bushings PAINT: Cab schematic 100WM Location 1:4421, School Bus Yellow(Std) Chassis schematic N/A 2 Proposal:8075-01 INTERNATIONAL® Vehicle Specifications April 14,2020 2021 HV513 SFA(HV513) Code Description List (US DOLLAR) HV51300 Base Chassis, Model HV513 SFA with 215.00 Wheelbase, 131.50 CA,and 55.00 Axle to $183,404.00 Frame. 1570 TOW HOOK, FRONT(2)Frame Mounted $118.00 1AND AXLE CONFIGURATION(Navistar)6x4 $1,524.00 Notes : Pricing may change if axle configuration is changed. 1CGE FRAME RAILS Heat Treated Alloy Steel(125,000 PSI Yield); 11.25"x 4.00"x $2,200.00 0.500"(285.75mm x 101.6mm x 12.7mm);480.8"(12212mm)Maximum OAL ILIA BUMPER, FRONT Swept Back,Steel, Heavy Duty $0.00 1WDS FRAME EXTENSION, FRONT Integral;20"In Front of Grille $590.00 1WTX WHEELBASE RANGE 199"(505cm)Through and Including 264"(670cm) $817.00 2ARY AXLE, FRONT NON-DRIVING(Meritor MFS-20-133A)Wide Track, I-Beam Type,20,000- $2,153.00 lb Capacity 3AHU SUSPENSION,FRONT,SPRING Multi-Stage Parabolic Taper Leaf,Shackle Type,20,000- $856.00 lb Capacity,with Shock Absorbers 3WAJ SPRINGS, FRONT AUXILIARY Air Bag, Right Side Only, Driver Control $770.00 4091 BRAKE SYSTEM,AIR Dual System for Straight Truck Applications $0.00 Includes : BRAKE LINES Color and Size Coded Nylon : DRAIN VALVE Twist-Type : GAUGE,AIR PRESSURE(2)Air 1 and Air 2 Gauges; Located in Instrument Cluster : PARKING BRAKE CONTROL Yellow Knob, Located on Instrument Panel : PARKING BRAKE VALVE For Truck :QUICK RELEASE VALVE On Rear Axle for Spring Brake Release: 1 for 4x2,2 for 6x4 :SLACK ADJUSTERS, FRONT Automatic(with Air Cam Brakes) : SLACK ADJUSTERS, REAR Automatic(with Air Cam Brakes) :SPRING BRAKE MODULATOR VALVE R-7 for 4x2,SR-7 with relay valve for 6x4/8x6 4619 TRAILER CONNECTIONS Four-Wheel,with Hand Control Valve and Tractor Protection $542.00 Valve,for Straight Truck Notes :When electronic stability control is ordered with trailer connections on a 4x2 truck,please check the operator manual for trailer weight restrictions. 4732 DRAIN VALVE(Berg)with Pull Chain,for Air Tank $0.00 4AZA AIR BRAKE ABS(Bendix AntiLock Brake System)4-Channel(4 Sensor/4 Modulator)Full $0.00 Vehicle Wheel Control System 4EBT AIR DRYER(Bendix AD-IP)with Heater $526.00 • 4JCC BRAKES,REAR,AIR DISC 22.5 Dia, Includes 18/24"Sq. In. Brake Chambers $0.00 4JCN BRAKES,FRONT,AIR DISC 22.5 Dia, Includes 20"Sq. In.Brake Chambers $20.00 4SPM AIR COMPRESSOR(Bendix BA-921 Head Unload)15.9 CFM $0.00 4VGN AIR TANK Painted Aluminum,with Straight Thread 0-Ring Ports $432.00 4VKB AIR DRYER LOCATION Mounted Inside Right Rail, Back of Cab $50.00 3 Proposal:8075-01 INTERNATIONAL' Vehicle Specifications April 14,2020 2021 HV513 SFA(HV513) Code Description List (US DOLLAR) 4WEY BRAKE PACKAGE,REAR{Bendix Spicer ADB22X}Air Disc Type,Extended Service,Size $0.00 22.5" 4WEZ BRAKE PACKAGE,FRONT{Bendix Spicer ADB22X}Air Disc Type,Extended Service,Size $0.00 22.5" 4WHA DUST SHIELDS,FRONT BRAKE{Bendix Spicer ADB22X}Pad,with Air Disc Brakes $48.00 4WHN DUST SHIELDS, REAR BRAKE{Bendix Spicer ADB22X}Pad,with Air Disc Brakes $96.00 4WZJ AIR TANK LOCATION(2):One Mounted Under Each Frame Rail,Front of Rear Suspension, $288.00 Parallel to Rail 5710 STEERING COLUMN Tilting and Telescoping $463.00 5CAW STEERING WHEEL 4-Spoke; 18"Dia.,Black $0.00 5PTB STEERING GEAR(2){Sheppard M100/M80}Dual Power $1,159.00 6DGU DRIVELINE SYSTEM{Dana Spicer}SPL250 Main Driveline with SPL170 Interaxle Shaft, $527.00 for 6x4 7BEU AFTERTREATMENT COVER Aluminum $278.00 7BKS EXHAUST SYSTEM Single, Horizontal Aftertreatment Device, Frame Mounted Right Side $1,210.00 Under Cab,for Single Vertical Tail Pipe, Frame Mounted Right Side Back of Cab 7SDK ENGINE COMPRESSION BRAKE by Jacobs;for N13/A26 Engines,with Selector Switch $0.00 and On/Off Switch 7WBA TAIL PIPE(1)Turnback Type, Bright $208.00 7WBS MUFFLER/TAIL PIPE GUARD(1)Bright Stainless Steel $133.00 7WDM EXHAUST HEIGHT 10' $0.00 8000 ELECTRICAL SYSTEM 12-Volt,Standard Equipment $0.00 Includes : DATA LINK CONNECTOR For Vehicle Programming and Diagnostics In Cab : HAZARD SWITCH Push On/Push Off, Located on Instrument Panel to Right of Steering Wheel : HEADLIGHT DIMMER SWITCH Integral with Turn Signal Lever : PARKING LIGHT Integral with Front Turn Signal and Rear Tail Light :STARTER SWITCH Electric, Key Operated : STOP,TURN,TAIL&B/U LIGHTS Dual,Rear,Combination with Reflector :TURN SIGNAL SWITCH Self-Cancelling for Trucks,Manual Cancelling for Tractors,with Lane Change Feature :WINDSHIELD WIPER SWITCH 2-Speed with Wash and Intermittent Feature(5 Pre-Set Delays), Integral with Turn Signal Lever :WINDSHIELD WIPERS Single Motor, Electric,Cowl Mounted :WIRING,CHASSIS Color Coded and Continuously Numbered 8518 CIGAR LIGHTER Includes Ash Cup $18.00 8541 HORN, ELECTRIC(2)Disc Style $29.00 8899 JUMP START STUD(2)Remote Mounted $214.00 8GXJ ALTERNATOR(Leece-Neville AVI160P2013}Brush Type; 12 Volt 160 Amp.Capacity,Pad $0.00 Mount BHAA BODY BUILDER WIRING To Rear of Frame,with Stop,Tail,Turn,and Marker Lights $327.00 Circuits,Ignition Controlled Auxiliary Feed and Ground,Less Trailer Socket 4 Proposal:8075-01 INTERNATIONAL' Vehicle Specifications April 14,2020 2021 HV513 SFA(HV513) Code Description List (US DOLLAR) 8MSG BATTERY SYSTEM{Fleetrite}Maintenance-Free,(3) 12-Volt 1980CCA Total,Top $0.00 Threaded Stud 8REA 2-WAY RADIO Wring Effects;Wring with 20 Amp Fuse Protection,Includes Ignition Wire $163.00 with 5 Amp Fuse,Wire Ends Heat Shrink and 10'Coil Taped to Base Harness 8RMZ SPEAKERS(2)6.5"Dual Cone Mounted in Both Doors,(2)5.25"Dual Cone Mounted in $138.00 Both B-Pillars 8RPT RADIO AM/FM/WB/Clock/USB Input/Auxiliary Input $368.00 8THB BACK-UP ALARM Electric, 102 dBA $120.00 8THJ AUXILIARY HARNESS 3.0'for Auxiliary Front Head Lights and Turn Signals for Front Plow $158.00 Applications 8VUJ BATTERY BOX Steel,with Plastic Cover, 18"Wide,2-4 Battery Capacity,Mounted Right $101.00 Side Back of Cab BVZR SWITCH,BODY CIRCUITS,MID with Remote Power Module Mounted in Cab Behind Driver $790.00 Seat, Up to 6 Outputs&6 Inputs,Max 20 amp per Channel, Max 80 amp Total, Includes 1 Switch Pack with Momentary Switches 8WGL WINDSHIELD WIPER SPD CONTROL Force Wipers to Slowest Intermittent Speed When $42.00 Park Brake Set and Wipers Left on for a Predetermined Time 8WGU BATTERY BOX COVER Aluminum $646.00 8WJV BATTERY DISCONNECT SWITCH{Joseph Pollak}for Cab Power Disconnect Switch, $217.00 Disconnects Power to Power Distribution Center(PDC), Does Not Disconnect Charging Circuits, Lever Operated,Cab Mounted 8WPH CLEARANCE/MARKER LIGHTS(5){Truck Lite)Amber LED Lights,Flush Mounted on Cab $0.00 or Sunshade 8WPZ TEST EXTERIOR LIGHTS Pre-Trip Inspection will Cycle all Exterior Lamps Except Back- $42.00 up Lights 8WRB HEADLIGHTS ON W/WIPERS Headlights Will Automatically Turn on if Windshield Wipers $42.00 are turned on BWXB HEADLIGHT WARNING BUZZER Sounds When Head Light Switch is on and Ignition Switch $49.00 is in"Off"Position 8WXD ALARM, PARKING BRAKE Electric Horn Sounds in Repetitive Manner When Vehicle Park $42.00 Brake is"NOT'Set,with Ignition"OFF"and any Door Opened 8WXG STARTING MOTOR{Mitsubishi Electric Automotive America 105P)12-Volt,with Soft-Start $0.00 8XAH CIRCUIT BREAKERS Manual-Reset(Main Panel)SAE Type III with Trip Indicators, $0.00 Replaces All Fuses 8XGT TURN SIGNALS,FRONT Includes LED Side Turn Lights Mounted on Fender $0.00 BXHN HORN,AIR Black,Single Trumpet,with Lanyard Pull Cord $94.00 9585 FENDER EXTENSIONS Rubber $0.00 9AAB LOGOS EXTERIOR Model Badges $0.00 9AAE LOGOS EXTERIOR, ENGINE Badges $0.00 9ANG HOOD.HATCH(01)for Servicing $444.00 9HBM GRILLE Stationary,Chrome $0.00 5 Proposal:8075-01 INTERNATIONAL® Vehicle Specifications April 14,2020 2021 HV513 SFA(HV513) Code Description List (US DOLLAR) 9HBN INSULATION,SPLASH PANELS for Sound Abatement $76.00 9WAC BUG SCREEN Mounted Behind Grille $131.00 9WBK FRONT END Tilting, Fiberglass,with Three Piece Construction, Includes Long Hood $0.00 10060 PAINT SCHEMATIC, PT-1 Single Color,Design 100 $0.00 Includes : PAINT SCHEMATIC ID LETTERS"WM" 10761 PAINT TYPE Base Coat/Clear Coat, 1-2 Tone $0.00 10BAE LABEL, DEF"DEF ONLY" $8.00 10SLV PROMOTIONAL PACKAGE Government Silver Package $0.00 1OWCY SAFETY TRIANGLES $47.00 11001 CLUTCH Omit Item(Clutch&Control) $0.00 12703 ANTI-FREEZE Red, Extended Life Coolant;To-40 Degrees F/-40 Degrees C,Freeze $0.00 Protection 12850 PTO EFFECTS, ENGINE FRONT for N13/A26 Engines, Less PTO, Unit, Includes Adapter $257.00 Plate on Engine Front Mounted 12BED ENGINE,DIESEL(International A26}EPA 2017,475HP @ 1700 RPM,1700 lb-ft Torque @ $1,678.00 1000 RPM,2100 RPM Governed Speed,475 Peak HP(Max) 12THT FAN DRIVE{Horton Drivemaster}Direct Drive Type,Two Speed with Residual Torque $0.00 Device for Disengaged Fan Speed Includes : FAN Nylon 12VAG AIR CLEANER Single Element,with Integral Snow Valve and In-Cab Control $352.00 12VHK FEDERAL EMISSIONS{International A26}EPA,OBD and GHG Certified for Calendar Year $0.00 2020 12WBR FAN OVERRIDE Manual;with Electric Switch on Instrument Panel,(Fan On with Switch On) $29.00 12WEG COLD STARTING EQUIPMENT Automatic;with Engine ECM Control $168.00 12WGA HOSE CLAMPS,RADIATOR HOSES, Mechanical Type;with Constant-Tension $54.00 Functionality 12WPZ OIL PAN Stainless Steel,for N13/A26 Engines $2,782.00 12WTA FAN DRIVE SPECIAL EFFECTS Fan Cooling Ring with Fan Shroud Effects, Engine $0.00 Mounted 12WZE EMISSION COMPLIANCE Federal, Does Not Comply with California Clean Air Idle $0.00 Regulations 12XBD RADIATOR Aluminum;Welded, Front to Back CrossFlow System, 1292 Sqln, 1008 Sqln $0.00 CAC Includes : DEAERATION SYSTEM with Surge Tank : HOSE CLAMPS, RADIATOR HOSES Gates Shrink Band Type;Thermoplastic Coolant Hose Clamps : RADIATOR HOSES Premium, Rubber 6 Proposal:8075-01 INTERNATIONAL' Vehicle Specifications April 14,2020 2021 HV513 SFA(HV513) Code Description List (US DOLLAR) 12XBT BLOCK HEATER, ENGINE{Phillips)120V/1150W,with"Y"Cord for 120V/300W Oil Pan $177.00 Heater Includes : BLOCK HEATER SOCKET Receptacle Type;Mounted below Drivers Door 13AUW TRANSMISSION,AUTOMATIC{Allison 4500 RDS}5th Generation Controls,Wide Ratio, $16,836.00 6-Speed with Double Overdrive,with PTO Provision,Less Retarder, Includes Oil Level Sensor,On/Off Highway 13WAW OIL COOLER,AUTO TRANSMISSION{Modine}Water to Oil Type $898.00 13WET TRANSMISSION SHIFT CONTROL Column Mounted Stalk Shifter $50.00 13WLM TRANSMISSION OIL Synthetic;63 thru 76 Pints $405.00 13WUC ALLISON SPARE INPUT/OUTPUT for Rugged Duty Series(RDS);General Purpose Trucks, $0.00 Construction 13WVV NEUTRAL AT STOP Allison Transmission Shifts to Neutral When Service Brake is $0.00 Depressed and Vehicle is at Stop;Remains in Neutral Until Service Brake is Released 13WYH TRANSMISSION TCM LOCATION Located Inside Cab $141.00 13WYU SHIFT CONTROL PARAMETERS{Allison}3000 or 4000 Series Transmissions, $0.00 Performance Programming 13XAN PTO LOCATION Customer Does Not Intend to Install PTO $0.00 14HRC AXLE,REAR,TANDEM{Meritor RT-46-164EH)Single Reduction,Standard Width,46,000- $13,666.00 lb Capacity,Driver Controlled Locking Differential in Forward-Rear and Rear-Rear Axle,200 Wheel Ends.Gear Ratio:5.63 Notes :Axle Lead Time is 45 Days 14ULY SUSPENSION, REAR,TANDEM{Hendrickson HMX-460-54}Walking Beam,46,000-lb $5,023.00 Capacity,54"Axle Spacing,Rubber Springs,with Transverse Torque Rods, Rubber End Bushings 14WAL SUSPENSION/REAR-AXLE IDENTITY for Meritor Tandem Rear Axles with Bar-Pin Beam $0.00 Attachment Type Suspensions 14WBN DIFF.SWITCH CONTROLS Two Independent Switches for Control Traction Differentials on $265.00 Tandem Rear Axles,Mounted on Dash 14WBV SHOCK ABSORBERS, REAR(4)for Hendrickson HMX Suspension Only,Mounted from $878.00 Frame to Beam 14WMK AXLE, REAR, LUBE{EmGard FE-75W-90}Synthetic Oil;65 thru 89.99 Pints $488.00 14WZY AXLE SHAFT MODIFICATION Axle Shaft Flanges Modified for 0.625"Diameter Drive Studs $498.00 with Solid Type Cone-Locks 15924 FUEL TANK STRAPS Bright Finish Stainless Steel $260.00 15BAA DEF TANK COVER Stainless Steel $233.00 15DYP DEF TANK 9.5 US Gal(36L)Capacity,Frame Mounted Outside Left Rail, Under Cab $0.00 15LKU FUEL/WATER SEPARATOR{Racor}Fuel Pre-Filter and Filter Base,Includes Water-In-Fuel $0.00 Sensor 15LLP LOCATION FUEL/WATER SEPARATOR Mounted Inside Left Rail,Back of Cab $50.00 7 Proposal:8075-01 INTERNATIONAL° Vehicle Specifications April 14,2020 2021 HV513 SFA(HV513) Code Description List (US DOLLAR) 15SJZ FUEL TANK Top Draw,Non-Polished Aluminum,26"Dia,80 US Gal(303L),Mounted Left $249.00 Side, Under Cab 16030 CAB Conventional, Day Cab $0.00 16BAM AIR CONDITIONER with Integral Heater and Defroster $1,187.00 16GDC GAUGE CLUSTER Base Level;English with English Speedometer and Tachometer,for Air $0.00 Brake Chassis,Includes Engine Coolant Temperature,Primary and Secondary Air Pressure, Fuel and DEF Gauges,Oil Pressure Gauge, Includes 3 Inch Monochromatic Text Display 16HGG GAUGE, OIL TEMP,ENGINE $54.00 16HGH GAUGE, OIL TEMP,AUTO TRANS for Allison Transmission $48.00 16HHE GAUGE,AIR CLEANER RESTRICTION{Filter-Minder}with Black Bezel, Mounted in $30.00 Instrument Panel 16HKT IP CLUSTER DISPLAY On Board Diagnostics Display of Fault Codes in Gauge Cluster $0.00 16JNT SEAT, DRIVER{National 2000}Air Suspension, High Back with Integral Headrest,Vinyl, $0.00 Isolator, 1 Chamber Lumbar,with 2 Position Front Cushion Adjust,-3 to+14 Degree Angle Back Adjust 16PPN SEAT, PASSENGER{National 2000}Air-Suspension, High Back with Integral Headrest, $623.00 Vinyl, Isolator, 1 Chamber Lumbar,2 Position Front Cushion Adjustment, Dual Shocks 16SEE GRAB HANDLE,EXTERIOR Chrome,Towel Bar Type,with Anti-Slip Rubber Inserts,for $118.00 Cab Entry Mounted Left Side at B-Pillar 16SJX MIRROR,CONVEX, HOOD MOUNTED{Lang Mekra}(2)Right and Left Sides,Bright, $390.00 Heated,7.5"Sq. 16SNR MIRRORS(2)C-Loop, Power Adjust, Heated,LED Clearance Lights,Bright Heads and $667.00 Arms,7.5"x 14"Flat Glass,Includes 7.5"x 7"Convex Mirrors,for 102"Load Width Notes :Mirror Dimensions are Rounded to the Nearest 0.5" 16SNX MIRROR, CONVEX, LOOK DOWN Right Side, Bright,6"x 10.5" $57.00 16VKK CAB INTERIOR TRIM Diamond,for Day Cab $548.00 Includes :CONSOLE,OVERHEAD Molded Plastic with Dual Storage Pockets,Retainer Nets and CB Radio Pocket;Located Above Driver and Passenger : DOME LIGHT, CAB Door Activated and Push On-Off at Light Lens,Timed Theater Dimming,Reading Lights;Integral to Overhead Console, Center Mounted :SUN VISOR(3)Padded Vinyl;2 Moveable(Front-to-Side)Primary Visors,Driver Side with Vanity Mirror and Toll Ticket Strap,plus 1 Auxiliary Visor(Front Only), Driver Side 16VSL WINDSHIELD Heated,Single Piece $632.00 16WBY ARM REST,RIGHT, DRIVER SEAT $39.00 16WBZ ARM REST,LEFT,PASSENGER SEAT $39.00 16WHJ HOSE CLAMPS,HEATER HOSE{Breeze}Belleville Washer Type $25.00 16WJU WINDOW, POWER(2)and Power Door Locks, Left and Right Doors, Includes Express $367.00 Down Feature 16WLS FRESH AIR FILTER Attached to Air Intake Cover on Cowl Tray in Front of Windshield Under $76.00 Hood 8 Proposal:8075-01 INTERNATIONAL° Vehicle Specifications April 14,2020 2021 HV513 SFA(HV513) • Code Description • List (US DOLLAR) 16WSK CAB REAR SUSPENSION Air Bag Type $0.00 16XJP INSTRUMENT PANEL Wing Panel $333.00 16XRX MODESTY PANEL Painted $217.00 16XWD SUNSHADE,EXTERIOR Aerodynamic,Painted Roof Color,with Integral Clearance/Marker $253.00 Lights 16XWJ WINDSHIELD WIPER BLADES Snow Type $30.00 16XWY WINDSHIELD WASHER RESERVOIR Mounted Under Cab with Remote Fill Mounted $61.00 Behind Cab Drivers Side . 16XXC COWL TRAY LID S200.00 16ZBT ACCESS,CAB Steel,Driver&Passenger Sides,Two Steps per Door,for use with Day Cab $0.00 and Extended Cab 27DUN WHEELS,FRONT{Accuride 29807}DISC;22.5x12.25 Rims, Powder Coat Steel,5-Hand $784.00 Hole, 10-Stud,285.75mm BC,Hub-Piloted,Flanged Nut,with Steel Hubs,Offset 5.37" . 28DUK WHEELS, REAR{Accuride 29169}DUAL DISC;22.5x8.25 Rims,Powder Coat Steel,5- $462.00 Hand Hole,10-Stud,285.75mm BC, Hub-Piloted,Flanged Nut,with.472"Thick Increased Capacity Disc and Steel Hubs 7382135423 (8)TIRE,REAR 11R22.5 Load Range H HDR2(CONTINENTAL),491 rev/mile,75 MPH, $408.00 Drive 7752665441 (2)TIRE,FRONT 425/65R22.5 Load Range L HAC 3(CONTINENTAL),465 rev/mile,68 ($148.00) MPH,All-Position Total of Product Features $255,655.00 Services Section: 40127 WARRANTY Standard for HV513,HV613 Models,Effective with Vehicles Built July 1,2017 $0.00 or Later,CTS-2030A 40MKG SRV CONTRACT,EXT COOLING SYS{Navistar}To 60-Month/100,000 Miles(160,000 km) $800.00 40TRB SRV CONTRACT, EXT ENGINE/AFTR{Navistar}To 60-Month/100,000 Miles(160,000 $4,400.00 km),Includes Engine,Engine Electronics,Turbocharger,Water Pump and Fuel Injectors, Aftertreatment Coverage for International A26 Engines uAsk' CA/ASs a iS L1S.i 4/1'3 5/o r sS" $ /607 .ao prior✓ .1/5-.)-- 7r ,"s i.<,d x . eP 4,/,z7i3.• 3s' a 600Y &vs q'►PmFN� Z� � ���� cee C4mm/Ns 60 IY1L,uT/./ o��: /oqO o 14J e,enir '• Uof - 9y :... PGQo� EMEND60 Cootmr SYs 6;6 -1170,rJ,t e NT/. • 7:v G0N.7 e r ,ifs c o��:`- 1/:3S 9C6.r� p.p. l �v/ - • ,.ter t� 'z>v ry -_. . �4/.3 93-3, 9r2 3/07/2020 ZWACK INC. RTE 22 Quote #:20074 STEPHENTOWN NY 12168 TELEPHONE 518-733-5135 JOB # FAX 518-733-6135 QUOTATION CUSTOMER :TOWN OF QUEENSBURY :HWY DEPT 742 BAY ROAD :QUEENSBURY :NY ZIP :12804 DELIVERY / / CUSTOMER TEL. 518-761-8211-ExT-0000 DESCRIPTION PRICE EVEREST CDS14SS3039 FRONT DISCHARGE CENTER CONVEYOR BODY, RHS132TML3654ST PLOW, W132 WING, 160,607.00 160,607.00 CARBIDE CUTTING EDGES ON PLOW & WING, PT PLOW HITCH, ACP48/ACP48/ST/62 WING SYS, 8" SS SPREAD APRON, CENTER COAL DOOR, AIR GATE, PIONEER EDD 1500AL ASP TARP W/ANTI SAIL BAR, REX PRESS COMP HYD SYS, COMPU SPREAD CS550, REAR POLY FENDERS, LED WING & SPINNER LIGHT, POST MOUNTED LED MINI LIGHT BAR, BODY UP ALARM, WHELEN LED DOT BODY WARN LIGHT SYS, HEATED LED PLOW LIGHTS, DEL CAB AIR CONTROLS, 24 TON PINTLE HITCH WITH CHIPPER BAR, PPG UNDER BODY PAINT, SUMMER FLOOR INSERT, HEAVY DUTY SCREENS, COMPLETE INSTALLATION ROAD WATCH TEMP SYSTEM ONONDAGA BID REF 8996 30% DISCOUNT 48,182.00- 48,182.00- TOTAL $112,425.00 Done By : The intent of this document is to describe in detail a 10 foot long combination dump body with rear material discharge spreader. It can be used both as a conventional dump body and a material spreader. Length: 14 Interior width: 88" Exterior width: 99" Sides/Headsheet Overall design to be modified monoshell design with no cross member support on floor Side-tailgate height to be: 10 34/44, 7.5/9.5 yards capacity 10"pockets for side boards, accepts 2"boards Side material 3/16"304SS Front corner post 10 ga 304SS, 7"wide by 3.38"deep Formed box top section, dirt shedding lower rub rail Rear corner post 10 ga 304SS, 15"wide by 5"deep Rear corner post full bolsters. Lower sill to be cut through post and welded forming an integral sill. Rear posts butt welded to lower sill not acceptable Vertical extrusion supports on sides 10 ga 304SS. Supports fully welded, stitch welding of supports not acceptable Three vertical side extrusions 7"wide by 3.38"deep Head sheet to be 3/16" 304SS. All full weld, no stitch welding acceptable Head sheet 60"high Cab shield to be 10 304SS, 24" Exterior width 99", inside width 88". (2)Lift lugs per side Floor Floor material 1/4"400F Steel Interior width 88" Floor completely flat with 54°ramp at outer edges to sidewalls. Tub shape or radius body designs not acceptable Long sills formed monocoque design incorporating the center conveyor, 11"deep section Long sill material 3/16"304SS plate Long sills joined in center by (2) cross tubes to provide ample support for conveyor floor welded to body long sills, cross tubes 3 1/2"OD. Wall thickness .30" • Floor includes bent plate stiffeners of 3/16"304SS Tailgate Tailgate 3/16"304SS sheet Bracing 10 ga 304SS The horizontal stiffeners and lower rub rail shall be dirt-shedding type 1 Air tailgate control standard. Dual air cylinder control Double 1/2"flame cut plate with 5/8" latch fingers and 1-1/4"diameter lower latch rods Upper hinge pins 1 1/4"with 3/8"outside ears and 3/"tailgate ears (2)3/8"grade 30 galvanized spreader chains standard No stitch welding, all seams fully welded Discharge door adjustable for multiple positions to allow for material metering when using spinner assembly for spreading material in snow and ice operations Discharge door design such that when completely shut material does not leak Overhang of body with apron to be suitable for paver operation Spreader Apron 12" 7 ga. 304SS bolt on design Conveyor Conveyor set up for rear discharge, 28"wide Conveyor floor 1/4"400F steel. 304SS conveyor return tray to prevent material spillage on chassis components (REMOVAL) Hydraulic motor drive, (1)planetary 25:1 gear boxes at rear of conveyor assembly, to include drive assembly at front of conveyor when front discharge or dual discharge body required. Conveyor chain double bar flight, one cross bar per pintle section of chain 667-X Pintle chain Spinner Spinner diameter 24" stainless steel Hydraulic spinner motor 3.0 CID Quick disconnects on hydraulic lines for ease of removal Spinner assembly mounted under rear discharge door opening Mount to be manual swing away style such that complete assembly can be manually swung in towards chassis such that body can be raised to complete height in dump position without removal of spinner assembly Spinner adjustable fore-aft, left-right and up-down Spinner swing arm and support assembly to be 304SS Hoist Hoist basket 3/8"thick mounting plate of 304SS (4) 1 1/4" machined ears of 304SS Ears welded to the mounting plate and headboard The hoist basket will be a floor line cylinder pivot with removable bearing blocks. The bearing block will be sized to match the selected cylinder Nitrided telescopic cylinder. The nitrided layer covers the entire cylinder travel surface. This layer shall be exceptionally hard and increases the sliding properties of the cylinder stages Non inverted telescopic hoist assembly Hoist to be sized appropriately for length of body requested Options: 24"cab shield(standard) 2 Air tailgate control (standard) 8"spreader apron 304SS (standard) Central grease line system Two oval lights cut outs in rear body corners, one for emergency flashers, one for additional stop/tail/turn lights for grommet light mounting. Stainless steel fold up ladders CDS section hinged screen package with lifting ring in center of screen. There shall be a stainless steel lift cable or welded D-ring provided for removal of screen and proper rigging so not to interfere with operation. There shall be a removable summer floor insert supplied with the body, The insert will oak cushion with 1/4 AR steel plate mounted on top. Floor shall be held in body with removable bolts on each side. REVERSABLE TRIP MOLDBOARD PLOW RHS132TML45SH Moldboard shall have a 60 degree attack angle standard but permit alternate settings At the 60 degree angle, dimensions are: Length: 132" overall Height: 45" measured at top of 1 curl, at skin plate Surface,vertically to the ground Overhang from the skin edge to the blade/ground contact Shall be 13.75" Moldboard shall consist of a steel framework supporting a one piece 10 gauge steel skin late, designed for high speed plowing with minimal blow back of snow Moldboard skin shall be brake formed for extra rigidity Framework shall consist of ten 3/8"thick by 3.5" deep steel flame cut ribs and a base angle of 5 by 3.5 by 5/8" angle Base angle shall be gusseted between shoe locations and standard blade bolt pattern a.a.s.h.o. (12" centers), c-1085 steel 1/2" x 8" x 132", reversible for wear There shall be two moldboard shoes behind the blade and a curb shoe on each end Push frame shall attach at four points evenly spaced, on a 1.25" diameter pins, through dual ribs Pin shall have 1.50" thick bearing area at each location, Moldboard shall have two lift points Push frame of modular design allowing choice of reversing methods (hydraulic cylinders, gear reverse or manual pin lock)without modification to the push frame build. Shall allow angling to 35 degrees either side of center Reversing frame shall have a main beam of 6" by 4" by 1/2" Hss tube reinforced by a full width sector of 4" x 4" x 1/2" structural angle, gussetted at stress points and pivoting about a 2 1/2" diameter 100,000 psi steel pin 3 1/2" diameter lift chain supplied standard Four moldboard attached ears, on 33" centers of 3/4" thick flame cut steel with 1 1/4" diameter pins A-frame is fabricated from 3/8" plate reinforced with 4" x 4" x 1/2" angle. Oscillator base of 1" plate with 1 1/4" diameter pivot bolt Oscillator bar has a base of 1" by 5" flat bar, 1" thick flame cut attached ears,reinforced by 1/2" x 2" flat bar. End hooks of 3/4" thick material to restrain a-frame oscillations Hydraulic cylinder reversing kit will have two 3" x 16" double acting cylinders protected by a double circuit pressure relieving valve, complete with quick connect hose connectors • Cylinders shall have hard chromed rods or nitrided rod surfaces. Specify Front plow shall have a carbide cutting edge. W-132 WING The wing shall be designed for the right side of the truck and shall be heavy duty. It shall have an overall length of 132" and shall have a 120" x 6" x 1/2" cutting edge. The nose height shall be 32" and the discharge height shall be 32-39". The cutting edge backer angle shall be 4" x 6" X 5/8" with gussets and shall be punched to accept 3" -3" - 12" - 12" cutting edges. Welded to this backer angle shall be a minimum of five 3/8" ribs. The leader shall be minimum of 1"plate steel and shall have two holes to accept a 1 1/4" wing bolt. The top of the ribs shall be welded to a 3" x 3" x 3/8" tube running the full length of the top of the wing. The wing skin shall be 10 gauge steel. There shall be several places longitudinally at the back of the wing to allow the push arms to be attached at the proper angle. To be painted orange. Wing shall have carbide cutting edge. POWER TILT HITCH MODEL PT-3A0588 Heavy duty truck mounted snowplow hitch designed for extreme use and to support and distribute the load stresses incurred while using single wing systems. This hitch is intednded for chassis requiring the tilt forward feature for engine access. The front mast powers both up and down to allow easy engine compartment access through the insertion and/or removal of three handle pins and is controlled by the lift arm cylinder • The front mast is constructed of 4" x 4" x 1/2" angle vertical members reinforced by 5/8" x 9" plate ribs, itersected by a 4"x 4" x 1/2" horizontal top angle,a 4" x 4"x 1/2" cylinder base angle, and by a 3" x 2" x 1/4" base to the plow pin points are on 31" centers with three 1 1/4" diameter pin locations The lift arm is fabricated from 1" flame cut steel plate, baced with two 1/2" x 2" steel flatbars welded to the main am 4 There shall be minimum 17.50" lift using a 4" bore by 14" sroke industrial quality double acting piston type cylinder hying a chromed rod. The lift arm shall have a triple pint chain hook The front mast shall be pinned to a mast support frame with four 1 1/4" steel pins. The support frame is in turn welded to a 5/8" steel bumper plate and can be adjusted in height to accommodate various chassis frame heights and models Front bumper plate shall be bolted to the chassis frame through two front frame brackets of 1/2" steel plate and two lower cheek plates of 5/8" steel plate that reach back on the frame rail to evenly distribute load stresses. The bumper is designed to allow sufficient room for pump Mounting Hitch shall allow for the use of wing systems without modification to the hitch Hitch shall permit the use of mechanical coupler type plow attachments ACP48 WING SYSTEM Leveling wing system 48" (all hydraulic) 1 front tower: shall be box section design totally enclosing the wing lift cylinder. 2 front tower shall be bolted to hitch cross tubes. 3 tower to be easily removable for the off season. 4 slide tray: 8" structural i-beam @ 18.4 lbs./ft. 5 slide track: 3/4" square bar full length. 6 tower structure: three slided box section formed from 1/4" plate welded to rear of slide tray to form cylinder enclosure. 7 internal bulkhead at stress points. 8 the slide control cylinder is vertically mounted and is connected to the slider at the top of the slide unit. 9 slide control cylinder: 3" bore x 48" stroke, double acting with nitrided piston rod. The rod diameter is 2". 10 slider: base plate of 3/4" x 7" plate x the height of the tower. 11 the front wing pivot "dee" attaches to the slider with a 3/4" plate section. 12 the wing dee will be the "safety trip" model, having a 1 1/2" diameter grade 5 wing mounting 5 bolt with slotted hex nut and cotter pin. 13 travel: 48" 14 cross-tubes: two hss sections mounted horizontally to connect the front tower to the front hitch. The hss section is 6" x 4" x 3/8" wall. acp48 rear tower: (fully hydraulic) 15 rear tower: shall be of box section design totally enclosing the wing lift cylinder. 16 rear tower shall have bolted connection to rear saddle to allow for various frame heights and off-season emoval without disturbing the hydraulic system. 17 tower shall have 25 degree angle to the frame to align pusharms to the wing. 18 slide tray: 8" structural i-beam @ 18.4#/foot. 19 slide track: 3/4" square bar full length of travel, two pieces. 20 tower structure: three sided box section formed from 1/4"plate welded to rear of slide tray to form cylinder enclosure. 21 the slide control cylinder is vertically mounted and is connected to the slider at the top of the slide unit(@ extreme top of tower) 22 slide control cylinder: 3" diameter bore x 48" stroke double acting with nitrided piston rod. The rod diameter is 2" diameter. 23 wing control cylinder: 3" diameter bore x 24" stroke double acting with 2" diameter nitrided piston rod. 24 this cylinder is mounted to operate in conjunction with the wing arms forming a 2 point pivot through which the wing is operated. 25 slider: base plate of 3/4" x 7"plate x the height of the tower. 26 the wing arms attach to 3/4"thick double arm mounting ears carrying 1 1/4" diameter grade 5 plated bolts with nylok nuts. 27. travel 48" 28 oil tank: 35 us gallon capacity with baffle, breather sight gauge and magnetic drain plug. Fabricated from 7 gauge plate with 3/8" "c" section end stands. Tank is bolted to rear saddle for ease of cleaning. Rrear saddle: a laterally mounted hss section of 6" x 4" x 1/2" wall thickness, forms the basis of the structure. "1" shape cheek plates with tower end gusseted to form a box with the tower attach bracket. 29 pipe struts supplied to stabilize the tower base. The mounting framework for the rear tower is 6 set at 25 degrees off the chassis centerline to position the tower slider assembly parallel to wing plow during operation. 30 safety trip front section: trip "dee" incorporates a 1" diameter torsion trip spring. 31 wing arms: the upper wing arm incorporates a 5/8" diameter wire tension trip spring. 32 the outer section section is 3" schedule 80 tubular section with a wall thickness of.300" 33 the inner section is 2/34" inch diameter solid bar. 34 the upper wing arm has a sliding cylinder connecting lug that functions to lift the wing and also provides for vertical wing "float" to allow the wing to follow the road shoulder contours. 35 the lower wing arm incorporates a 5.8" wire compression spring to create a shock absorber effect for the wing plow. 36 the outer section is 2 1/2" schedule 80 tubular section with a wall thickness of.276". 37 the inner section is 2 1/4" diameter solid bar. 38 universal joint connectors are located at each end of both wing arms. Apron, 7 ga, 8" b/o there shall be a removable spread apron. Coal door There shall be a door mounted in body tailgate. Pioneer EDD 1500d (automatic) 8-11'tarp w/anti sail bar Central hydraulic system specifications Hydraulic pump The front mounted flow and pressure compensated pump shall be driven direct and in-line with the crankshaft through a double universal joint driveline. The hydraulic pump must be of piston type and capable of 37 GPM at 2000 engine RPM. Pressure sense line must be internally bled at the pump. Pump case drain must be plumbed directly to reservoir-not through return line filter. Low Oil Shut Down: A single normally open,two position,two way poppet type solenoid valve must be mounted directly to the hydraulic pump discharge port in such a way as to stop all oil flow to the hydraulic system when energized. The solenoid valve must be wired directly to an in tank mounted level indicator. The level indication shall be of the float type and mounted from the top of the reservoir. When the float switch contacts close,the shut-down valve blocks pump 7 flow and an annunicator on the main control will be activated. The momentary switch shall be mounted on dash board for low oil shut-down override. This switch shall be wired in such a way as to de-energize the system shut-down to facilitate fault finding and equipment stopping. DRIVELINE The hydraulic pump is to be driven by a 1310 series driveline off the engine harmonic balancer which must accept a 1350 series flange yoke. The driveline can have no more than a 4 degree operating angle and must be assembled with proper slip movement. HYDRAULIC VALVING Central hydraulic system valving shall be of mobil design made to withstand exposure to de- icing chemicals and severe weather conditions without the use of a watertight enclosure. It shall be of cast iron construction-horizontally stackable and serviceable without disassembly. Each section must have a built-in flow and pressure compensator, to allow simultaneous operation regardless of any other system function. HYDRAULIC RESERVOIR Hydraulic reservoir to a minimum of 30 gallon capacity. The reservoir must be baffled, have a magnetic drain plug,pressurized breather cap and a suction strainer with a minimum 2"NPTF outlet. Reservoir shall also have an electrical low lever indicator. FILTRATION A 10 micron filter must be installed in the return line of the reservoir. The filter assembly must have a 25 PSI bypass and an element condition indicator. HYDRAULIC LINES AND PLUMBING All hydraulic lines,pipes,hosed, and fitting shall be of sufficient capacity to accommodate the volume of oil without undue hating or turbulence in the system. A 2" suction line with a minimum SAE rating of 100-R4 must be used between the reservoir and the inlet of the pump. All of the pressure hosed, including the signal sensing line to the pump must have swivel fittings on both ends and have a minimum SAE rating of 100-R2. Return lines and the case drain line must have a minimum SAE rating of 100-R1. Hydraulic lines shall be routed to minimize interference with equipment and chassis components requiring periodic servicing. Appropriate support brackets, grommets, and ty-raps shall be provided to protect lines from abrasion, cutting and impact damage. Hoses shall not be installed near manifold or exhaust pipes so as to be affected by extreme heat. There shall be no pipe.fittings used with any high pressure lines. Any and all hydraulic quick disconnect couplings used for spreader system and snow plow reversing system shall be of the bulkhead mounted style and rigidly attached without the use of any hose clamp arrangements(loose hose ends are not acceptable). Dust cap for male ends and dust plug for female ends must be attached to couplers. Maximum distance allowed between support clamps on all hydraulic hoses shall be approximately 24". 8 CS-550 LITE Spreader Control: The CAN Bus spreader control system shall be ground speed orientated to maintain a pre- determined application rate regardless of vehicle speed. Control shall be by microprocessor for high control accuracy with the outputs being current compensated. In order to ensure there will be no electrical interference either to or from the controller, any controller bid shall comply with the following standards: ISO 11452-2(2004-10) for RF Immunity ISO 11452-4(1996)for RF Immunity ISO 7637-2(2004) for Conducted Immunity ISO 7637-2(2004-06) for Transient Emissions Controller shall comply with ISO 16750-5 for Resistance to Media. (resistance to spills of coffee, soda etc.) The controller shall be capable of operating in Manual,Automatic (Closed Loop), Open Loop, Ground Speed Triggered Manual and 12V triggered modes. Controller shall have a 7"wide VGA touch screen display with 262144 colors. The display shall be a glass/film/glass design with a hardness of 7H. The display shall have adjustable brightness with the maximum brightness being no less than 400 cd/m2. The display shall include a 1.5 watt speaker that announces rate changes, pause and blast. The controller shall be capable of having 4 different solid material calibrations, 4 different prewet liquid calibrations and 4 different anti-ice material calibrations for a total of 12 different materials. Each material shall have 9 programmable application rates. Controller shall have 3 detented rotary knobs for application rate selection. Each knob shall have stainless steel shafts and have a rotational torque of at least 8 oz-in. The controller shall be capable of operating Auger/Conveyor, Spinner, Pre-Wet,Anti-Ice, Cross Conveyor,Air Gate, Closed Loop Gate and Spinner Chute control. It must be capable of operating the Spinner, Auger/Conveyor, Pre-Wet, and Anti-Ice all at the same time. The Controller shall have the following features: GPS Compatible: The controller, as supplied, must be capable of passing data logging information directly to an external GPS system without having to purchase additional equipment from the spreader controller manufacturer. s Temperature Read Back and Temperature Compensation: The controller shall be capable of displaying both road temperature and ambient air temperature on screen when an external temperature sensor is used. The controller shall be capable of automatically increasing the application rate in response to decreasing road temperature. The rate at which the controller increases the application shall be adjustable in the controllers programming. Onboard Wi-Fi and GPS Info: The controller shall have built-in Wi-Fi and GPS for optional data downloading. This requires optional Wi-fi and GPS antennas.Also requires municipalities router and IT set-up of router along with internal municipal IT support;if this option is used. Auto Nulling: The controller shall be capable of auto nulling spinner, conveyor/auger and liquid channels when feedback sensors are used. Manual Nulling must be available for all circuits including cross conveyor left and right. System Programming: Programming shall only be accessed by use of an encrypted USB key. All programming shall be done by using the touch screen display. The touch screen display shall have a pop-up keyboard for easy entering of information. Material Set Back: When using liquid to pre-wet granular material the controller must be capable of cutting back the granular material by a predetermined percentage when the liquid is being applied. The percentage shall be programmable. Trip Summary Information: The driver must be able to access a trip summary screen that will show them miles traveled and material spread quantities. This information shall also be stored in the controller and used to calculate season totals. On Screen Error Code Log: For ease of troubleshooting,the controller shall have an on screen error log that is capable of displaying any error codes that have been generated. The error log shall not clear itself when the controller is powered off. Data Logging: The controller,as supplied, shall be capable of event based data logging such as Event time, Date, Material set-point and usage amounts, Spinner set-point, Pre-Wet set-point and usage amounts, Blast distance and amount used, Pause distance, Gate Setting, and Road Temperature. All the information will be transferred from the spreader control to a desktop/laptop computer via USB drive. All data logging information must be capable of being customized and exported. Summation reports are not acceptable. SPECIAL OPTIONS Rear poly fenders 10 Led light for wing& spinner Body up alarm& indicator Post mounted mini light bar Road watch temp system. EMERGENCY LIGHTING SYSTEM: Mounting and wiring of Whelen Emergency Lighting LED Whelen 500 series light heads. Four(4)Front and Two (2)Rear LED head assemblies, Whelen 500 Series Super Linear LED Light Head Model #5VA02ZCR mounted in rubber grommets in oval cut out in body corner posts. Lights to be wired to chassiss supplied switch and labeled. Stop/tail/turn lighs shall be installed in rear post(Whelen 50ROOXRR RED) Clear LED back up light shall be installed in rear post or under body LED back up lights. LED Snow Plow lights-HEATED LED plow light, solid state light that can withstand shock and vibration. LED light elimates EMI with 50,000 hrs. Metalized reflector to contol exact light pattern. Pedestal mount with full adjustment utilizes corrosion resistant aluminum housing to dissipate heat. Impact polycarbonate lenses protects lenses from damage. Cab Pneumatic Controls There shall be direct mounted air cylinders on each valve section with fine proportional control of the spool. All connections shall be total enclosed with no moving parts exposed. Inside the cab shall be a 4 way compensating air valve. This shall provide metering action of each pneumatic shift cylinder mounted on the valve section. There shall be a air protection valve and a filter& lubricator to protect all pneumatic controls. Each valve section shall be color coded for ease of service. All controls shall be mounted in a custom tower with no exposed air lines in the cab. 24.5 TON PINTLE HITCH BP760 Pintle hitches include 1/2" mounting plates with two "D" rings drop forged. w/chipper bar PPG ERP-420-1 &ERP-201-1 Epoxy Coating. Under side of body, frame, and plow equipment shall be painted with PPG AUE-370-FG-1 epoxy black paint 11