2005-366 (zt TOWN OF QUEENSBURY FILE
742 Bay Road,Queensbury,NY 12804-5902 (518)761-8201
Community Development - Building & Codes (518) 761-8256
CERTIFICATE OF OCCUPANCY
Permit Number: P20050366 Date Issued: Tuesday, November 29, 2005
This is to certify that work requested to be done as shown by Permit Number P20050366
has been completed.
Tax Map Number: 523400-308-007-0001-016-000-0000
Location: 31 WOODSHIRE Ct
Owner: TRA-TOM DEVELOPMENT, INC.
Applicant: THOMAS FARONE & SONS INC.
This structure may be occupied as a:
Fireplace By Order of Town Board
Garage - 2 Cars Attached TOWN OF QUEENSBURY
Single Family Dwelling
Issuance of this Certificate of Occupancy DOES NOT relieve the
property owner of the responsibility for compliance with Site Plan,
Variance, or other issues and conditions as a result of approvals by the Director of Building&Code Enforcement
Planning Board or Zoning Board of Appeals.
TOWN OF QUEENSBURY
742 Bay Road,Queensbury,NY 12804-5902 (518)761-8201
Community Development-Building&Codes (518) 761-8256
BUILDING PERMIT
Permit Number: P20050366 Application Number: A20050366
Tax Map No: 523400-308-007-0001-016-000-0000
Permission is hereby granted to: THOMAS FARONF,& SONS TNC.
For property located at: 31 WOODSHIRE Ct
in the Town of Queensbury,to construct or place
at the above location in accordance with application together with plot plans and other information hereto filed
and approved and in compliance with the NYS Uniform Building Codes and the Queensbury Zoning
Ordinance. Tye of Construction Value
Owner Address: TRA-TOM DEVELOPMENT, INC. Fireplace
667 STATE ROUTE 9 Garage-2 Cars Attached
GANSEVOORT, NY 12831-0000 Single Family Dwelling $273,000.00
Total Value $273,000.00
Contractor or Builder's Name / Address Electrical Inspection Agency
FARONE CONSTRUCTION
PO BOX 804 ROUTE 9
GANSEVOORT_ NY 12831
Plans&Specifications
2005-366 LOT 31 HSE #31 WOODSHIRE CT
2283 SQ FT SINGLE FAMILY DWELLING
$322.36 PERMIT FEE PAID-THIS PERMIT EXPIRES: Friday, June 02, 2006
(If a longer period is required,an application for an extension must be made to the code Enforcement Officer
of the Town of Queensbury before the expiration date.)
Dated at the f Quee b //rkr.,day, June 02, 2005
SIGNED BY for the Town of Queensbury.
Director of Building&CO)"le Enforcement
Permit No.
jilding&Codes Office-Department of Community Development-Town of Queensbury Fee Paid
42 Bay Road,Queensbury,NY 12804 Recreation Fee ecr
ave Hatin,Director codes@aueensbury.net FEE
hone: (518) 761-8256 FAX: (518) 745-4437
P 't°
Principal Structure Building Permit Application
_
kpplication & Plans subject to review before issuance of a valid permit for construction.
nstructions: A permit must be obtained before beginning construction. No inspections will be made until the
applicant has received a valid building permit. All applicants' spaces on this application must be completed and
nust appear on the application form.
applicant/Builder Owner:
Nddress: 11_W-.Y- Address:
-tome Phone: SKI - Sj-k2� V Home Phone:
=mail Address: Email Address:
Zell Phone: Cell Phone:
FAX Phone: FAX Phone:
Person responsible for supeer��vision of work with respect to building and codes compliance:
Name:
Address: Phone
Location of proposed construction: Lot No. Legal Address: St L2?n/oQ�. .[/1� _
Tax Map Number: Subdivision Name:
. alIA 9�j� !Z2 z2ze<)
Estimated Cost of Construction: $$7
Proposed construction is for: _ _�R6sidential Use _Commercial Use
Name of Business:
if proposed construction is an addition,what will use of new addition be? --�
New Addition Alteration Proposed construction V Floor 2nd floor Other Total Proposed
structure (Occupancy Type) Sq.Ff. sq.ff. Sq.Ft. Square feet Height
Ft.&In.
Sin ale-Family Dwelling /5V
Two-Family Dwelling
Townhouse
Multifamily Dwelling
Number of Units:
Office
Mercantile
Manufacturing
Other:
Attached Garage 1, 3
Type of Heating System: Electric, O", Gas ood, Forced Hot Air, Baseboard, Other:
If a fireplace and/or woodstove are being installed, please refer to a separate application.
Applications are subject to Zoning Administrator, Code Compliance, and Structural Plan review.
The Building and Codes Office will allow commencement of your proposed project only after'
issuance of your permit.
Declaration: Please sign below after you have carefully read the statement:
To the best of my knowledge, the statements contained in the application, together with the plans and
specifications submitted, are a true and complete statement of all proposed work to be done on the described
Premises and that all provisions of the Building Codes, the Zoning Ordinance, and all other laws pertaining to the
proposed work shall be complied with,whether specified or noted, and that such work is authorized by the owner.
Further, it is understood that I/we shall submit prior to a Certificate of Occupancy or Certificate of Compliance ,
being issued, as requested by the Zoning Administrator or Director of Building and Codes, an As-Built Survey by a
licensed surveyor, drawn to scale,showing actual location of all new construction.
Date:_,!-due IDS Applicant/Builder Signature: iqj� 6
The application of dated is here y approved and
permission granted for the on truct1,on, reconstruction or alteration of ci uilding/ nd or accessory structure as set
forth above. /���
Date: (/ Authorized Signature:
LASue Hemingway\Building.Permit. RMS\Principal Structure Permit Application.doc V:12/14/04
Application for Permit-Septic Disposal System
Town of Queensbury 742 Bay Road Queensbury,NY 12804 (518) 761-8256
1. OWNER INFORMATION: j.....................................................................................................................................:
Office Use
Location of installation:
File Permit No.
Tax Map No.
Fee Paid
Owner's Name:
Address: �1 _
2. INSTALLER'S NAME tY PHONE NO.
3. RESIDENCE INFORMATION: (circle year o dwelling, indicate#bedroom(s) and multiply #of
bedrooms with applicable gallons per bedroom to equal total daily flow)
Year of House: No. of Bedrooms x Comi)utation = Total Daily Flow
1980 or older x 150 gal/bdrm =
1980— 1991 x 130 gal/bdrm = _
1991 —present x 110 gal/bdrm =
Garbage Grinder Installed yes_ / no
Spa or Hot Tub Installed yes— / no�—
4. PARCEL INFORMATION: (circle applicable information&indicate measurements)
a h ature Ground Water Bedrock or Im ervious Material . Domestic Water Supply
FI at what depth at what depth munici
ang �Dt—feet feet e
Steep slope clay if well; water supply
_%slope other from.any septic-system
depth: absorption is ft.
other
Percolation Test: (To be completed by licensed professional engineer or architect)
Rate: minute per inch
5. PROPOSED SYSTEM: For New Construction: All individual sewage disposal systems must be designed by a licensed
professional engineer or architect(unless installed in a Planning Board approved subdivision). Add 250 gallons to the size
of the septic tank and leach field for each Garbage Grinder,Spa or Whirlpool Tub.
Septic Tank: 12 gallon (min. size 1,000 gal)
Tile Field: each trench .�� ft. Total System Length:
Seepage Pit(s): number of size of each: ft. by ft.
Size of Stone to be used: # / depth or thickness feet
Bed System Size: x
Alternative System: �— length and/or size ---�-
6. HOLDING TANK SYSTEM: (if required)
Number of tanks: / Size of each: gallons TOTAL Capacity: gallons
Note: Alarm System and associated electrical work must be inspected by a Town approved
electrical inspection agency.
7. SIGNATURE &INFORMATION FOR RESPONSIBLE PERSON(please read)
For your protection,please note that pursuant to Section 136-29 of the Code of the Town
of Queensbury, any permit or approval granted which is based upon or is granted in
reliance upon any material misrepresentation or failure to make a material fact or
circumstance known by or on behalf of an applicant, shall be void.
I have read the regulations with respect to this application and agree to abide by these and all
requirements of the Town of Queensbury Sanitary Sewage Disposal Ordinance.
Ex�oeal
Signature of responsib 6 person Date
.'I'awt► of (Itic ►llsbury
Appmidix C.
t
AB•►+t)ILi''t'1tIt�I
' SI�;I'/1•ItA'I'IW1W ItI:tZLJ1ItI�I�II�.I�J'I'�; '
1
.•.,IMF A•.�tw���,•.•.I.�.�' ` • ,
PoN D
01
i t Sc f - r
1. 7�. ly.,t tY t
Us;,ttctt:��iu•�t '
A�IYx�Rt'tx1 a
r '
• ' d
r
71 SIGN A►TURE &NFOR1viATIOjJ FOIL MINNswLro rz^,zvi� �.,a,+•�..,••.:,
Fire Marshal's Office Town of Queensbury,742 Bay Road,Queensbury,NY
(518)761-8205
Application for Fuel Burning Appliances & Chimneys
applicable to solid fuel & vented gas appliances
- f �
Date 1 ry , 20 Permit No.
Application is hereby made to the Building& Codes'Office.for the issuance of a Building and Use
Pertnit pursuant to the New York State Fire Prevention and Building Code. The applicant or owner
agrees to comply with all applicable laws, ordinances, regulations, and all conditions that are part of
these requirements and also will allow all inspectors to enter premises to perform required inspections.
NOTE to applicant: Rough-in and Final Inspections are required.
Applicant Information Fuel Burning Appliance Information
(circle appropriate words)
Name: r s w r {:; t Stove: wood coal pellet gas
_ Fireplace insert
Address: i ; G Fireplace, factory-built: wood i-gas
Fireplace, masonry: wood gas
Furnace: wood gas oil
Phone: y _ - j-
If non-masonary applicance, please provide
Owner: Manufacturer Name:
Address: r1 Model Number: _
Chimney Information
Phone: (circle appropriate words)
Masonry block brick stone
Flue tile steel size: inches
Exact Address: 4 f ? 1
of construction or installation Factory-Built
Manufacturer name:
Model Number:
Note: Listed By: _ Number:
Construction IInstallation must
conform to NYS Fire Prevention &Building Indicate(circle) chimney material:
Code. Consult available Town of Queensbury
Handouts regarding required inspections. Double wall / Triple wall I Insulated / Direct venting
Chinmey Liner
� G��rhf,e�-',a Z's�pa�.rtm�nciE--To�r�rx o�PQu+ert���bury, ..rTB�Yorl��- -
Fire Marshal Code# $Collected $Rcf ended Received from (refunded to): (,, ,-V, _z LI I I f.-
OD address:____
ddress:- - _ _ -- _ --_---
A 173 3389 (190) Public Safety
A 233 2655 (230)Minor Sales
DATE:
White(Applicant) / Green(Fire Marshal) / Yellow(Bldg. Dept.) J Pink&Goldenrod(Cashier's Dept.)
wnia-
V v
Check Residential Plan Review: One&Two Family Dwellings
/N/N/A K/
2)Full sets of plans
Over 1,500 sq. 11.—Stamped
Design Loads On Plans:90 Wind Floor Loads 40 psf
70 Ground Snow Load Sleeping Areas and Attics 30 psf
Calculations:
Window Schedule With Glass Size
Door Schedule/Main Entrance 36"Door
Emergency Escape Or Bedrooms and Habitable Space
Above/Below grade,5.7 sq.ft.
Grade,5.0 sq.ft.
24"(h)x 20"(w)min.
44"Max.Height above floor
sidential Check Paperwork Compliance and Inspectors Checklist: OK
Dampproofing/Waterproofing Materials On Plans
oundation Drainage On Plans,if required
'Drop in 10'Exterior Grade
ftaming Cross Section For Each Roof Line,Vertical Fire Stopping Every 10'Where
Required
e and Snow shield 24"Inside Exterior Wall/24"Inside Knee Walls
latforms At Exterior Doors
Stairway Headroom 6' 8'All Stairs 36"Width
Stair Run and Rise
Winder Run and Rise
Y
Spiral Not Allowed From 2 Story
ke Detectors Battery Backup and Proper Location
V�bathroorri Fixtures Proper Clearance
all Width,36"min.
Vj andrails More Than One Riser On Open Sides
Railing and Guards>30"/Basement Stairs Included/Closed Risers More Than 4"in Ht.
Safety Glazing Notes For Required Areas
Garage Fire Separation
arage Floor Sloped
Attic Access
oof over 30"—22"x 30"/Crawl Spaces 18"x 24"Access
Carbon Monoxide Detector Lowest Sleeping Level
Soil Test Results,if required
Septic To Well Or Water Line Separation
All Paperwork Signed
Town of Queensbury Fire Marshal
low 742 Bay Road
Queensbury,NY 12804
761-8205/761-8206
fax 7454437
Factory Bu!t Gas as Fireulace/Stove Inspection Regort
Notice:New York State requires that all UL Listed,factory built appliances be installed according to the instructions and
specifications contained in the Installation Manual accompanying the appliance.No deviation from the manufacturer's
instructions or specifications is allowed.
Permit# L�5 �{ Schedule Inspection 1//
6 Time am pm anytime Inspector
Name 1X I C4_j' Address Zot 3i ` 31 Rough>e Fin
Appliance Manufacturer-- Model#
Direct Vent Factory Built Chimney Flue Size Double Wall Triple Wall Insulated
Yes No N/A Comments
Floor Protection
Clearances to Combustibles (all sides)
Firestop(s) Vertical Chase a
Wall Penetration
Vent Clearances to Combustibles
Vent/Chimney Termination
Chimney height must be 3 feet above roof
penetration;2 feet above any combustible
construction within 10 feet
Gas Shut-Off Valve
Combustion Air
Hearth Extension (if any)
Mantel
Height above f/p opening
Witness Operation
Tank Placement(if LP)
White^_Dept Yenew Cast r Pink—Fire Marsha[
Final Survey Inspection
Dept. of Community Development
Town of Queensbury
742 Bay Road
Queensbury,NY 12804
Date received:
-C4
NAME: C
LOCATION: 3 .
PERMIT#:
Final Survey Plot Plan
Avvroved Denied
The attached final
survey has been
received by the
Dept.of
Community
Development.
Upon review the
survey has been:
Craig ;rown, Wing 'strator
Notes:
L:\SueHeniingway\Building.Codes.inspection.FORMS\FinaI Survey
Zoning Administratondoc
y
MAP REFERENCE: wOODs
SUBDIVISION PLAN HIRE
YACNSTIC
RICHARD P. SCHERMERHORN
DATED: FEBRUARY 11, 2003
LAST REVISED: MARCH 17, 2004
BY: VAN DUSEN & STEVES NO 007'5 °E
16.84'
Z�r
.9 00. 96,
0
O
I � � •rV'E�O
LOT 30 \ �,
IPROPOS
iHOvs EO \
I
o � I 6668
CV3 N /
ti
y
I /
I / /
LOT 29 LOT 31
I 41,417 sq. ft. / �ry ���,
0.95 acres
h�O
5
I
/ LOT 32 �=
I RE
/ CC/VEp
I MAY
TOwN OF
BUILDING UEErvSBURy
/ AND CODE
\ / or observed, cr
Ach as houses, tiwe„5
S26a s' !Iis document. I also F+ .
��- IIy measured the distanrei
r9„�
LOT 28 .._�_
sIGMTUR
atei MAY 0
uS •U11AL10101Sg,D MLISEDTLA OR ADDITION to A sulA Plot Plan made for Scale 1'=30'
V YAP BION OF ACTION 6O LAND SUROEYORS SEAL IS A
VIOLATION
OF SECTION 72OY.SL1B-pN9p1 2 OF 7!E
NEW YORH STATE EOUCA710Y LAW
S 'ONLY COPES NOON THE OF THE
OF SU VETOES
YN7KFD INll1 AN ORIGNAL OF 1NE LAID SIKtVEYORS
SEAL SHALL.BE CONSDETED TO 9E VALID TRITE COPEV S- 1
•` L,US PREPATm 14 AON E WITH T H O MA.S J. FAR O N E & S O N
THIS EXISTING
O US PREP ICE M AOCOID LA OIR ,fE
Land Surveyors °°THE OF SO"`TI"° IONALADOP p�
BY 1HE NEW YOitlC STATE ASSOCIAl10N OF PROEESSIOIIAL
LAND SEROEVIM SAD CERTF1OA71ONS SHALL TUN ONLY
1O THE PERSON FOR M1011 THE SURVEY IS PREPARED.NO �1 'OF 1
OM M BEHALF M THE TITLE COMPANY.GOVENNAMTAL
169 Haviland Road Queensbury, New York 12804 "° AID`SING"S11U71ON LIMED HOOK AM Town of Queensbury, Warren County, New York
7HE lD A.SION ES OF THE LENDING wsnTETDII•
FARONE
(518) 792-8474 New York Lie. No. 50135 NO. DATE DESCRIPTION DWG. NO. 02392-31
Queensbury Building & Code Enforcement - Residential Final Inspection
fjffice No.-,�',18)761-8256 Arrive: am/pm D ,
art: l m/pm
Date Inspection request recewed: % e e- , Inspector's Initials: i Z
NAME: Gvt 6 f-e n Y PERMIT#: ��
LOCATION: _ / �' - �� DATE: _ O
TYPE OF STRUCTURE:
commmef
Ye No N/A
Building Number/Address visible from road
Chimney Height/"B"Vent/Direct Vent Location
Fresh Air Intake
3 inch Plumbing Vent through roof minimum 6 inches
Roof Complete/Exterior Finish Complete
Platform at all exterior doors
Guards at stairs,decks,patios more than 30 inches above grade
Guard at stairwell at 34 inches or more
Guard at deck,porches 36 inches or more
Handrail Termination at Newell Post or Wall
Interior/Exterior Railings 34 inches to 38 inches
Interior Handrails @ stairs 2 or more risers
Grade away from foundation 6 inches with 10 feet
6 inch clearance to sill plate
Gas Valve shut-off exposed/regulator 18 inches above grade
Interior privacy/trim/doors/main entrance 36 inches
Bathroom/Kitchen watertight
Safety glazing/Window in stairwells safety glazing
Interior Smoke Detectors:
Every level: Every Bedroom:
Outside every bedroom area:
Inter Connected: Battery backup:
Carbon Monoxide Detector
Attic access 30 inches x 22 inches x 30 inches(height)in accessible area
Crawl Spaces 18 inch x 24 inch access, 1 s .ft.-150 s .ft.vents
Bathroom Fans,if no window
Plumbing fixtures
Foundation insulation
Floor truss,draft stopping finished basement 1,000 s . ft.
Emergency egress below grade
Gas Furnace shut-off within 30 feet or within line of site
V74-
Oil Furnace shut-off at entrance to furnace area
Furnace/Hot Water Heater operating
Low water shut-off boiler � �i A,
Relief Valves installed/Heat Trap/Water Temp 110 �C_ ff
Enclosed Stairs Sheetrock Underside minimum%z"Gypsum
Basement stairs closed rise>4 inches 7 /
Garage Floor Pitched
Garage fireproofing/Y4 hour fire door/door closer
Duct work Sealed properly
Gas Logs in Sealed oy QLar.En sure
Final Electrical 0
Final Survey Plot 1
As Built Septic System/Sewer Dept.Inspection Sticker
Site Plan /Variance required ,
Flood Plain Certification,if required
Okay to issue C/C or C/O[Temporary/Permanent
L:\Building&Codes Forms\Building&Codes\Inspection Forms\Residential Final Inspection Form_revised 100405.doc
NOV 29 2005 3: 02PM HP LRSERJET 3200
d NACE ENGINEERING, P.C.
169 Haviland Road, Queensbury,NY 12804
Phone-518-745-4400 Fax -518-792-8511
November 29, 2005
Job#46175
New York State Dept. of Health
77 Mohican Street
Glens Falls,NY 12801
RE: Indian Ridge Subdivision - Queensbury(T)
31 Woodshire Court (Lot431)- Septic System
Dear Sir/Ma'am:
This letter is to inform you that I inspected the completed septic system for the house on 31
Woodshire Court(Lot#31)in the Pine Ridge Subdivision on September 6, 2005.
The septic system as installed was for a four bedroom house and consisted of a 1,250 gallon
septic tank and 220 lineal feet of absorption trench constructed with stone and perforated pipe.
The system conforms to the requirements of the approved subdivision design drawings.
Please call me if you have any questions or concerns.
Sincerely,
Thomas R. Center Jr. PE
cc: Dave Hatin,Town of Queensbury
Tom Farone
Rough Plumbing / Insulation Inspection Report
Office No. (518) 761-8256 Date Inspection request received: 9/�- ?J C)-'�
Queensbury Building & Code Enforcement Arrive: am/prgiepart0- am/ m
742 Bay Road, Queensbury, NY 12804 Inspector's Initials:
Ji
NAME: L� PERMIT #: (fS
LOCATION: INSPECT ON: a-3
TYPE OF STRUCTURE:
Y N N/A
Rough Plumbing / Nail Plates
Plumbing Vent / Vents in Place
1 1/2 inch minimum Drain Size
Washing Machine Drain 2 inch minimum
Cleanout every 100 feet / change of direction
Pressure Test
Drain / Vent
Air/ Head
5 P.S.I. or 10 ft. above highest connection for 15 minutes
Pressure Test
Water Supply Piping `
Air/ Head CeIC./�50 or 15 minutesv�
nsulatigiq Residential Check/ Commercial Check
Proper Vent Attic Vent
Duct / Hot Water Piping Insulation
If required unheated spaces
Combustion Air Supply for Furnace
Duct work sealed properly / No duct tape
COMMENTS:
LAPam Whiting\Building&Codes\Inspection Forms\Rough Plumbing Insulation Report.revised Nov 17 2003.doc Revised February 15,2005
Framing / Firestopping Inspection Report 7j
Office No. (518) 761-8256 Date Inspection request received: � ,'-
Queensbury Building&Code Enforcement Arrive: am/4i� m/pm
742 Bay Road, Queensbury,NY 12804 Inspector's Initials:
NAME: PERMIT#:
LOCATION: ,INSPECT ON: —
TYPE OF STRUCTURE:
Y N N/A COMMENTS
ng
Attic Access 22"x 30"minimum
Jack Studs/Headers l 1
Bracing/Bridging
Joist hangers
Jack Posts/Main Beams
Exterior sheeting nailed properly
12"O.C.
Headroom 6 ft. 8 in.
Stairwells 36 in. or more
Headroom 6 ft. 8 in.
Notches/Holes/Bearing Walls
Metal Strapping for Notches Top Plate
1 %z w) 16 gauge 8) 16D nails each side
Draft stopping 1,000 sq. ft. floor trusses
Anchor Bolts 6 ft. or less on center
Ice and water shield 24 inches from wall
Fire separation 1,2,3 hour
Fire wall 2, 3,4 hour
Firestopping
Penetration sealed
16 inch insulation in cavity min.
Garage Fire Separation
House side '/z inch or 5/8 inch Type X
Garage side 5/8 inch Type X
Ceiling/wall
Windows Habitable Space/Bedrooms
24 in. (H)
20 in. (W)
5.7 sf above/below grade
5.0 sf grade
k
s Town of Queens3ury Fire Marshal
164t 742 Bky Road /nsamnd
Queensburya NY 12804
761-8205/)61-8206
fax 745-A437
Factory Built Gas Fireplace/Stove Insoectioa Report
Notice: New York State requires that all UL Listed,factory built appliances be installed according tospecifications contained in the Installation Manual accompanying the appliance.No deviation from the
instructions or specifications is allowed.
Permit# Schedule Inspection - 2 Time11 r L am pm anytime Insp
Name _ _ _Addmss_ �1� rx _ �—_— Roug In_._.Final—
Apptiance Man acturer_ ��1`'' �'` Model# r/ -� C � �QC,67 3 6q
Direct Vent Factory Built Chimney Flue Size Double Wall Triple Wall Insulated
Yes No N/A/ Comments
Floor Protection
Clearances to Combustibles (all sides)
Firestop(s) Vertical Chase
Wall Penetration
Vent Clearances to Combustibles
Vent/Chimney Termination
Chimney height must be 3 feet above roof
penetration;2 feet above any combustible
construction within 10 feet
Gas Shut-Off Valve
Combustion Air
Hearth Extension (if any)
Mantel
Height above f/p opening
Witness Operation
Tank Placement(if LP)
White-Bedding DepL --.—.--_._..__---_.__ Ydbw r I Pink-Fin MarAA
Rough Plumbing / Insulation Inspection Report
Office No. (518) 761-8256 Date Inspection reque recei
Queensbury Building & Code Enforcement Arrive: am e = ami
742 Bay Road, Queensbury, NY 12804 Inspector's Initials:
NAME: PERMIT #:
LOCATION: INSPECT ON: 1
TYPE OF STRUCTURE:
Y N N/A
u h Plumbing / Nail Plates
Plumbing Vent/ Vents in Place
1 1/2 inch minimum Drain Size
Washing Machine Drain 2 inch minimum
Cleanout every 100 feet/ change of direction
Pressure Test
Drain / Vent
Air / Head
5 . . Bove highest connection for 15 minutes
ressure'
r Supply Piping
Air / Head DAL
50 P.S.I for 15 minutes
Insulation Residential Check/ Commercial Check �J Proper Vent Attic Vent
Duct / Hot Water Piping Insulation
If required unheated spaces
Combustion Air Supply for Furnace
Duct work sealed properly / No duct toe
COMMENTS:
LAPam Whiting\Building&Codesunspection Forms\Rough Plumbing Insulation Report.revised Nov 17 2003.doc Revised February 15,2005
Septic Inspection Repo I
e
Office No. (518) 761-8256 Date Inspectio request ce' ed:
Queensbury Building&Code Enforcement Arrive: am/p epart: a
742 Bay Rd.,Queensbury,NY 12804 Inspector's Initia .
NAME: �Y r��--� P IT NO.:
o ! 3CoC
LOCATION: �;`�(7(� ` l SPECT ON: 1
RECHECK:
Comments an o diagram
Soil Type: and a
Type of u ' e ater
Waterline separatio istance ft.
Well separation distance ft.
Other wells: ft.
Absorption Field: Total length ft.
Length of each trench Adp-S-6,ft-
Depth of trenches ft.
Size of Stone
Seepage Pits: Number
Size: x
Stone Size:
Piping Size Type
Building to tank VA ",
Tank to Distribution Box t
Distribution Bo i ld/Pit Lk �L
Opening Seal N/gaKial
End Caps
Location/Separations
Foundation to tank
Foundation to absorptionJ5 ft.
Separation of Pits ft.
Conforms as r Plot Plan Y
Engineer Report and As-Built Y wN
Location of System on Property:
Front Rear Left Side Side
Middle Fron fiddle Rea
System Use Status: �t
i
pproved
artial Appr47oved and needs to be re-inspected,please call the Building&Codes Office
d
Last revised 1/6/05
F-I
r
DSHIRE -
YA
NO 007'S RE
16.8
A,30 0.96,,
0.00
\ v�
I ?'
� 60
ram„
66.13'
IPROpOS
I "0`'S� °
I
oCY)
C13 N I 6668,
i
QO �U� r
H
I /
I
I LOT 31
41,417 sq. ft. / ��1•'f.�`
I 0.95 acres
h�O
5
/ LOT 32
I /
/
o?
00,
:ylly r
9 �
A SURVEY
/1
Foundation Inspection Report
Office No. (518)761-8256 Date Inspection VpmDepart:
:
Queensbury Building&Code Enforcement Arrive: am/pm
742 Bay Rd., Queensbury, NY 12804 Inspector's InitiNAME: INt=LOCATION: ( 5
TYPE OF STRUCTURE: ��
Comments
-- Y N N/A
Footings
Piers LK
Monolithic Slab^A—
Reinforcement in Place
The contractor is responsible for
providing protection from freezing
for 48 hours following the placement
of the concrete.
Materials for this purpose on site.
Foundation/Wallpour
Reinforcement in Place
Foundation Dampproofing
Foundation/Waterproofing
Type of Dampproofing/Waterproofing
Footing Drain Daylight or Sump
Footing Drain Stone:
12 inch width
6 inches above footing
6 mil poly for wet areas under slab
Backfill Approval
Plumbing Under Slab
PVC/Cast/Copper
Foundation Insulation Interior/Exterior
R- __
Rough Grade 6 inch drop within 10 ft.
L:\SueHemingway\Building.Codes.InspectionTORM SToundation Inspection Report.doc January 28,2003
Framing / Firestopping Inspection Report _
Office No. (518) 761-8256 Date Inspection request received:
Queensbury Building& Code Enforcement Arrive: vam/ epart: _im/pm
742 Bay Road, Queensbury, NY 12804 Inspector's Initials: _
9�
NAME: C���s`S�_ PERMIT#: (_/
LOCATION: INSPECT ON:
TYPE OF STRUCTURE:
Y N N/A COMME T
Framing
Jack Studs/Headers
Bracing/Bridging
Joist hangers
Jack Posts/Main Beams
Exterior sheeting nailed properly
12"O.C.
Headroom 6 ft. 8 in.
Stairwells 36 in. or more
Headroom 6 ft. 8 in.
Notches/Holes/Bearing Walls
Metal Strapping for Notches Top Plate
1 '/2 (w) 16 gauge(8) 16D nails each side
Draft stopping 1,000 sq. ft. floor trusses
Anchor Bolts 6 ft. or less on center
jpeland snow shield 24 inches from wall
Fire separation 1, 2, 3 hour
Fire wall 2, 3, 4 hour
Firestopping
Penetration sealed
16 inch insulation in cavity min.
Garage Fire Separation
House side %2 inch or 5/8 inch Type X
Garage side 5/8 inch Type X
Ceiling/wall
Windows Habitable Space/Bedrooms
24 in. (H)
20 in. (W)
5.7 sf above/below grade
5.0 sf grade
L:\SueHemingway\Building.Codes.inspection.FORMS\Framing Firestopping Inspection Report.doc January 28,2003
Foundation Report
Ins Inspection P -2f, fA.)
�.
Office No. (518) 761-8256 Date Inspection request received: 2
Queensbury Building &Code Enforcement Arrive: am/ Depar& - -am/pm
742 Bay Rd., Queensbury,NY 12804 Inspector's Initials:
NAME: �C����� � _ PERMIT#: 3_
LOCATION: INSPECT ON:
TYPE OF STRUCTURE:
s
Comments
Y N N/A
Footings
Piers
Monolithic Slab
Reinforcement in Place
The contractor is responsible for
providing protection from freezing
for 48 hours following the placement
of the concrete.
Materials for this purpose on site.
Foundation/Wallpour
enforcement in Place
Foundation Dampproofing yT
Foundation/Waterproofing
Type of Dampproofing/Waterproofing
Footing Drain Daylight or Sump
Foot Drain Stone:
2 inch width
6 inches above footing
6 mil poly for wet areas under slab
ckfill Approval
Plumbing Under Slab
PVC/Cast/Copper
Foundation Insulation Interior/Exterior
R- _
Rough Grade 6 inch drop within 10 ft.
LASueHemingway\Building.Codes,InspectionTORMSToundation Inspection Report.doc January 28,2003
Foundation Inspection Report
Office No. (518)761-8256 Date Inspection reque t received:
Queensbury Building&Code Enforcement Arrive: am/ Depa • �i m/pm
742 Bay Rd., Queensbury, NY 12804 Inspector's Initials.
NAME: PERMIT#:
LOCATION: ��� � Z INSPECT ON:
TYPE OF STRUCTURE:
Comments
— Y`TN N/A— ,
Footings
Piers
Monolithic Slab
Reinforcement in Place
The contractor is responsible for
providing protection from freezing
for 48 hours following the placement
of he concrete.
aterials for this purpose on site.
F undation/Wallpour
Reinforcement in Place
Foundation Dampproofing
Foundation/Waterproofing
Type of Dampproofing/Waterproofing
Footing Drain Daylight or Sump
Footing Drain Stone:
12 inch width
6 inches above footing
6 mil poly for wet areas under slab
Backfill Approval
Plumbing Under Slab
PVC/Cast/Copper
Foundation Insulation Interior/Exterior
R- _
Rough Grade 6 inch drop within 10 ft.
L:\SueHemingway\Building.Codes,Inspection.FORMS\Foundation Inspection Report.doc January 28,2003
Foundation Inspection Report
Office No. (518) 761-8256 Date Inspection request received:
Queensbury Building&Code Enforcement Arrive: am/ Depart: m
742 Bay Rd., Queensbury,NY 12804 Inspector's Initials:
NAME: C ,(f PERMIT#: 0 S ,3 _
LOCATION: L a INSPECT ON:
TYPE OF STRUCTURE:
Comments
Y N N/A
ootings
Piers
Monolithic Slab T
Reinforcement in PlaceA
The contractor is responsible for
providing protection from freezing
for 48 hours following the placement
of the concrete.
Materials for this purpose on site.
Foundation/Wallpour
Reinforcement in Place
Foundation Dampproofing
Foundation/Waterproofing
Type of Dampproofing/Waterproofing
Footing Drain Daylight or Sump
Footing Drain Stone:
12 inch width
6 inches above footing
6 mil poly for wet areas under slab
Backfill Approval
Plumbing Under Slab
PVC/Cast/Copper
Foundation Insulation Interior/Exterior
R- _
Rough Grade 6 inch drop within 10 ft.
LASueHemingway\Buil ding.Codes.Inspection.FORMSToundation Inspection Report.doc January 28,2003
Permit Number
REScheck Compliance Certificate Checked By/Date
New York State Energy Conservation Construction Code
REScheck So$ware Version 3.6 Release 2
Data filename: C:\Program Files\Check\REScheck\2515-02 LONDONBERRY-FARONE-LOT 4-29 WESTBURY,
QUEENSBURY.rck
PROJECT TITLE: PLAN NO.2215-02 LONDONBERRY
COUNTY: Warren RECEIVE®
STATE: New York
HDD: 7635 MAY
CONSTRUCTION TYPE: Detached I or 2 Family
HEATING TYPE: Non-Electric TOWN OF
SBU Y
BUILDING AND
WINDOW /WALL RATIO: 0.13
DATE: 05/14/05
DATE OF PLANS: MAY 14, 2005
PROJECT DESCRIPTION:
THOMAS J. FARONE AND SON
LOT 4-29 WESTBERRY
QUEENSBURY, NEW YORK 12804
DESIGNER/CONTRACTOR:
WILLIAMS & WILLIAMS DESIGNERS
509 GLEN STREET
GLENS FALLS, NEW YORK 12801
COMPLIANCE: Passes
Maximum UA= 547
Your Home UA= 416
23.9%Better Than Code(UA)
Gross Glazing
Area or Cavity Cont. or Door
Perimeter R-Value R Value -Factor UA
Ceiling 1: Fiat Ceiling or Scissor Truss 1615 30.0 0.0 57
Wall 1: Wood Frame, 16" o.c. 1233 19.0 0.0 60
Window 1: Vinyl Frame:Double Pane with Low-E 143 0.320 46
Door 1: Glass 42 0.330 14
Door 2: Solid 21 0.130 3
Door 3: Solid 35 0.130 5
Wall 2: Wood Frame, 16" o.c. 1590 19.0 0.0 85
Window 2: Vinyl Frame:Double Pane with Low-E 180 0.320 58
Basement Wall 1: Solid Concrete or Masonry 1233 11.0 0.0 86
Wall height: 8.0'
Depth below grade: 6.0'
Insulation depth: 8.0'
Floor 1: All-Wood Joist/T russ:Over Outside Air 44 19.0 0.0 2
Furnace 1: Forced Hot Air, 92 AFUE
COMPLIANCE STATEMENT: The proposed building represented in this document is consistent with the building
plans, specifications, and other calculations submitted with this permit application. The proposed systems have been
designed to meet the New York State Energy Conservation Construction Code requirements. When a Registered Design
Professional has st and si this page, they are attesting that to the best ofhis/her knowledge, belief and
professional judgmen s ch pl tipns are in compliance with this Code.
igner Date -✓�(��� r'f
RES check Inspection Checklist
New York State Energy Conservation Construction Code
REScheck Soffware Version 3.6 Release 2
DATE: 05/14/05
PROJECT TITLE: PLAN NO.2215-02 LONDONBERRY
Bldg. j
Dept. j
Use j
j
j Ceilings:
[ ] j 1. Ceiling 1: Flat Ceiling or Scissor Truss, R-30.0 cavity insulation
Comments:
j Above-Grade Walls:
[ ] j 1. Wall 1: Wood Frame, 16" o.c., R-19.0 cavity insulation
Comments:
[ ] ( 2. Wall 2: Wood Frame, 16" o.c., R-19.0 cavity insulation
Comments:
j
Basement Walls:
[ J j 1. Basement Wall 1: Solid Concrete or Masonry, 8.0'ht/6.0'bg/8.0' insul,
R-11.0 cavity insulation
Comments:
j Windows:
[ ] j 1. Window 1: Vinyl Frame:Double Pane with Low-E, U-fictor. 0.320
j For windows without labeled U-fictors, describe Eatures:
j #Panes Frame Type Thermal Break? [ ]Yes [ ]No
j Comments:
[ ] j 2. Window 2: Vinyl Frame:Double Pane with Low-E, U-fictor: 0.320
For windows without labeled U-fictors, describe features:
j #Panes Frame Type Thermal Break? [ ]Yes [ ]No
j Comments:
j Doors:
[ ] j 1. Door 1: Glass, U-factor: 0.330
j Comments:
[ ] j 2. Door 2: Solid, U-Wor. 0.130
j Comments:
[ ] j 3. Door 3: Solid, U-factor: 0.130
j Comments:
j
j Floors:
[ ] j 1. Floor 1: All-Wood Joist/Truss:Over Outside Air, R-19.0 cavity insulation
Comments:
j
j Heating and Cooling Equipment:
[ ] 1. Furnace 1: Forced Hot Air, 92 AFUE or higher
Make and Model Number
Air Leakage:
[ ] Joints, penetrations, and all other such openings in the building envelope that are sources of air
leakage must be sealed.
[ ] Recessed lights must be 1)Type IC rated, or 2)installed inside an appropriate air-tight assembly
with a 0.5" clearance from combustible materials. Ifnon-IC rated, the fixture must be installed with a
3" clearance from insulation.
Vapor Retarder:
[ ] Required on the warm-in-winter side of all non-vented framed ceilings, walls, and floors.
Materials Identification:
[ ] Materials and equipment must be installed in accordance with the manufacturer's installation instructions.
[ ] Materials and equipment must be identified so that compliance can be determined.
[ ] Manufacturer manuals for all installed heating and cooling equipment and service water heating
equipment must be provided.
[ ] Insulation R-values, glazing U-factors, and heating equipment efficiency must be clearly marked on
the building plans or specifications.
Duct Insulation:
[ } ( Supply ducts in unconditioned attics or outside the building must be insulated to R-11.
[ } Return ducts in unconditioned attics or outside the building must be insulated to R-6.
[ ] Supply ducts in unconditioned spaces must be insulated to R-11.
[ ] Return duds in unconditioned spaces (except basements)must be insulated to R-
[ ] Return duds in unconditioned spaces (except basements)must be insulated to R-2..
Insulation is not required on return duds in basements.
Duct Construction:
[ ] ) All joints, seams, and connections must be securely fastened with welds, gaskets, mastics(adhesives),
mastic-plus-embedded-fabric, or tapes. Tapes and mastics must be rated UL 181A or UL 18113.
Exception:Continuously welded and locking-type longitudinal joints and seams on ducts
operating at less than 2 in. w.g. (500 Pa).
[ ] The HVAC system must provide a means for balancing air and water systems.
Temperature Controls:
[ ] Each dwelling unit has at lesat one thermostat capable of automatically adjusting the space
temperature set point of the largest zone.
Electric Systems:
[ ] Separate electric meters are required f5r each dwelling unit.
Fireplaces:
[ ] Fireplaces must be installed with tight fitting non-combustible fireplace doors.
[ ] Fireplaces must be provided with a source of combustion air, as required by the Fireplace construction
provisions of the Building Code of New York State, the Residential Code of New York State or
the New York City Building Code, as applicable.
Service Water Heating:
[ ] Water heaters with vertical pipe risers must have a heat trap on both the inlet and outlet unless the
water heater has an integral heat trap or is part of circulating system.
[ ] Insulate circulating hot water pipes to the levels in Table 1.
f
Circulating Hot Water Systems:
[ ] Insulate circulating hot water pipes to the levels in Table 1.
Swimming Pools:
[ ] All heated swimming pools must have an on/ofheater switch and require a cover unless over 20%
ofthe heating energy is from non-depletable sources. Pool pumps require a time clock.
Heating and Cooling Piping Insulation:
[ ] HVAC piping conveying fluids above 105 'F or chilled fluids below 55 OF must be insulated to the
levels in Table 2.
Table ]: Minimum Insulation Thickness for Circulating Hot Water Pipes.
Insulation Thickness in Inches by Pipe Sizes
Heated Water Non-CirculatingRunouts Circulating Mains and Run_outs
Temperature(Fl Un to 1„ Ug to 1.25" 1.5"to 2.0" Over 2"
170-180 0.5 1.0 1.5 2.0
140-169 0.5 0.5 1.0 1.5
100-139 0.5 0.5 0.5 1.0
Table 2: Minimum Insulation Thickness for HVAC Pipes.
Fluid Temp. Insulation Thickness in Inches by Pipe Sizes
Piping System Types Range(F) 2"Runouts 1" and Less 1.25"to 2" "t "
Heating Systems
Low Pressure/Temperature 201-250 1.0 1.5 1.5 2.0
Low Temperature 120-200 0.5 1.0 1.0 1.5
Steam Condensate(for feed water) Any 1.0 1.0 1.5 2.0
Cooling Systems
Chilled Water, Refrigerant, 40-55 0.5 0.5 0.75 1.0
and Brine Below 40 1.0 1.0 1.5 1.5
NOTES TO FIELD(Building Department Use Only)