JB201133.0008A.Gradation.2020-10-14.Rpt.0008APARTICLE SIZE DISTRIBUTION REPORT
Report Number:
Service Date:
Report Date:
Task:
Client
JB201133.0008A
10/14/20
10/15/20
Rosetti Acquisitions LLC
Attn: Christopher Falvey
427 New Karner Rd
Albany, NY 12205
30 Corporate Cir Ste 201
Albany, NY 12203-5169
518-266-0310
Fowler Square SI and CMT
Bay Road and Blind Rock Road
Queensbury, NY 12804
Project
Project Number: JB201133
Silty sandSample Description:
On-SiteSample Location:
Sample Information
Silty sand (SM)
Laboratory Test Data
ASTM D6913Test Method:
NAMethod:
LL Air - 0, LL Oven - 0, PL - 0, PI - 0Atterberg Limits:
BulkSample Type:
Oven DriedSample Preparation:
USCS:Sieving Method: Composite Sieving-Single Separation
Percent
Finer
Pass
(X=Fail)
Sieve
Size
Spec.*
100-1003" 100.0
2" 100.0
1-1/2" 100.0
1" 100.0
3/4" 100.0
1/2" 99.6
3/8" 99.1
1/4" 98.7
#4 98.0
#10 97.7
#40 96.6
#100 65.6
0-15#200 18.9 x
D =D =D =C =C =60 30 10 c u FM = 0.13 0.09*
Comments:
Services:Perform gradation analysis on sample of material returned to the office in general accordance with ASTM D6913.
Reported To:
Contractor:
Report Distribution:
(1) Rosetti Acquisitions LLC, Christopher Falvey (1) BBL Construction Services, Eric Weatherwax
(1) BBL Construction Services, Ryan Etue (1) BBL Construction Services, Scott Lounsbury
(1) Galusha & Sons LLC, Drew Stevens (1) Galusha & Sons LLC, James Campagnone
N/A
BBL/Galusha
Jared Hall
Staff Geologist
Reviewed By:
Dente Group - A Terracon Co. Rep.: A. Barron
Test Methods:ASTM D6913
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable to the
actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical materials.
CR0027, 06-10-17, Rev.0 Page 1 of 1