Loading...
2013-478 t TOWN OF QUEENSBURY woo742 Bay Road, ueensbu ,NY 12804-5902 (518)Q �7 761-8201 Community Development - Building & Codes (518) 761-8256 CERTIFICATE OF OCCUPANCY Permit Number: P20130478 Date Issued: Monday, February 22, 2016 This is to certify that work requested to be done as shown by Permit Number P20130478 has been completed. Location: 15 WILD TURKEY Ln Tax Map Number: 523400-239-015-0001-006-000-0000 Owner: CHARLES MACKEY Applicant: CHARLES MACKEY This structure may be occupied as a: Residential Addition By Order of Town Board TOWN OF QUEENSBURY Issuance of this Certificate of Occupancy DOES NOT relieve the property (- 44.0 4 4/Pt owner of the responsibility for compliance with Site Plan, Variance, or other issues and conditions as a result of approvals by the Planning Board Director of Building&Code Enforcement or Zoning Board of Appeals. TOWN OF QUEENSBURY '�0./P4 742 Bay Road,Queensbury,NY 12804-5902 (518)761-8201 Community Development-Building&Codes (518) 761-8256 BUILDING PERMIT Permit Number: P20130478 Application Number: A20130478 Tax Map No: 523400-239-015-0001-006-000-0000 Permission is hereby granted to: CHARLES MACKEY For property located at: 15 WILD TURKEY Ln in the Town of Queensbury,to construct or place at the above location in accordance with application together with plot plans and other information hereto filed and approved and in compliance with the NYS Uniform Building Codes and the Queensbury Zoning Ordinance. Type of Construction Value Owner Address: CHARLES MACKEY Residential Addition $227,100.00 15 WILD TURKEY Ln Total Value LAKE GEORGE,NY 12845-0000 $227,100.00 Contractor or Builder's Name/Address Electrical Inspection Agency TEAKWOOD BUILDIERS INC. JIM SASKO 518-857-6108 8 BUTLER P1 SARAGOTA SPRINGS NY 12866-0000 Plans&Specifications 2013-478 Res. Addition 1,400 sq ft $280.00 PERMIT FEE PAID-THIS PERMIT EXPIRES: Saturday, October 18,2014 (If a longer period is required,an application for an extension must be made to the code Enforcement Officer of the Town of Queensbury before the expiration date.) Dated at the Tow of Qu nsbu Fr's .yi•ctober 18,2013 il.Vf SIGNED BY for the Town of Queensbury. Director of Building&Code Enforcement Office Use Only Town of Queensbury Building & Codes Received: Tax Map ID: 3 -1. 15 PRINCIPAL STRUCTURE APPLICATION Permit No.: / 3 -`1 `} g A permit must be obtained before beginning construction Permit Fee: $ ;71 3`�0 `l t1. Please read: *TB resolution 86-2013(1-28-2013): $850 recreation fee for new dwelling *Rec Fee: $ A) /}1' units, including single-family dwellings,duplexes or two-family dwellings, multiple family Site Plan No.: dwellings, apartments, condominiums, townhouses, and/or manufactured and modular Subdivision No.: homes,but not including mobile homes. This is in addition to the permit fee. Date 'VIZ? Applicant }Pl(1(L�,jLY I.i(kAf . �y�c Tax MapID 2 'i . I�� I— Address l v MCA �P � �P 1'1G Zoning 1A) 1 A ■ +. .: L Phone/E-mail -5' za'k Property Owner 'DM ,ka(0,t,t Contractor/Agent 4'I(A id-- Address N) is "f(A.Y\tt,< tine; Address 0e0a=7 N-1, 12 1 Phone/E-mail (56) 16C- 0442 Ctn�(Vf.,0 ANCa1/4/-4Y2k(, e/E-maillV.-_RS•CAM Contact Person for Building &Code Compliance: -)1Vy\ - )K11,0 Day Phone: - ') Building Street Address: fJ 4 N111t1 U rtLA I G�►tit_. Subdivision Name: +� Lot#: Historic Site: Yes )< No Estimated cost of construction: $ 227, 1 o Type of Construction: Check all that apply Please indicate measurements as required below:Fy-o&y-i _ 0 0 d t 1st Floor 2nd Floor Other Total Height F ¢ a Single Family I► 111b s� Two-Family "lU Multi-Family(#of units ) Townhouse Business Office Retail-Mercantile Factory-Industrial Attached Garages(#_) Other Town of Queensbury Building&Codes Principal Structure Packet 518-761-8256 If commercial or industrial indicate name of business • Proposed use of building or addition S -'rlk - S t Le FAM rc Source of heat(circle one) Gas Oil Propane Solar Other Fireplace-complete a separate application for"Fuel Burning Appliances&Chimneys" _Yes _No P �e b ��- 3ez1 Are there structures not shown on plot plan? N() Are their easements on the property? Site Information a. Dimensions or acreage of lot 13( qC_ 5(9°1aS • (? b. Is this a corner lot? c. Will the grade be changed as a result of construction: Yes ✓ No d. Public water or Private well T{izIVATF_ e. Sewer or Private Septic System SEMI C. - fYi ST ,(U Value of all work to be performed(labor and materials) $ po °D Declaration: I acknowledge no construction activities shall be commenced prior to issuance of a valid permit and will be completed within a 12 month period. If work is not complete by the 1 year expiration date the permit may be renewed, subject to fees and department approval. I certify that the application, plans,and supporting materials are a true and complete statement/description of the work proposed,that all work will be performed in accordance with the NY State Building Codes, local building laws and ordinances, and in conformance with local zoning regulations. I acknowledge that prior to occupying the facilities proposed, I or my agents will obtain a certificate of occupancy. I also understand that I/we are required to provide an as-built survey by a licensed land surveyor of all newly constructed facilities prior to issuance of a certificate of occupancy. I have read and agree to the -love. Print Name: Signature: .� Date: /0/14/3 FOR OFFICE E ONLY: Operating Permit Issued: Yes No Occupancy Type: Construction Classification: Assembly Occupancy Limit: Special Conditions: Town of Queensbury Building&Codes Principal Structure Packet 518-761-8256 Residential Final Inspection StCt./AS Inspection request received Name 11\0 ,,\ Inspected on 2 2 Location 1,-\1 voi1cu Arrive C , am Permit No. IA\3- A{'; Inspector's Initials ritA9 Type of Structure QHS, \->ev V et? lbIit120 ,t\- Yes No N/A Bathroom Fans, if no window 4" Building Number Address visible from road Plumbing fixtures Chimney Height/"B" Vent/Direct Vent Foundation insulation to floor/ Sticker on Panel Location Fresh Air Intake Duct work sealed properly/ Blower Door Test Certification 3" Plumbing Vent through roof minimum 18" Floor truss.draft stopping finished basement Roof Complete/ Exterior Finish Complete 1,000 sq. ft. Platform at all exterior doors Emergency egress below grade Handrail 4 or more risers Gas Furnace shut-off within 30 ft. or within line Guards at stairs, decks, patios more than 30 " of site above grade Oil Furnace shut-off at entrance to furnace area Guard at stairwell at 34" or more Furnace/Hot Water Heater operating Guard at deck, porches 36 " or more Low water shut-off boiler Handrail Termination at Newell Post or Wall Relief Valve(s) installed / Heat Trap/Water Interior/Exterior Railings 34 "to 38 " Temp 110 Deck Bracing/Handicapped Ramp Compliant Enclosed Stairs Sheetrock Underside minimum %:" Gypsum Grade away from foundation 6 " with 10 feet Basement stairs closed rise+ 4 inches 6" clearance to sill plate Garage Floor Pitched Gas Valve shut-off exposed / regulator 18"above grade Garage fireproofing / /. hour fire door/door closer Interior privacy /trim /doors/ main entrance Gas Logs in Sealed or Glass Enclosure 36 " Bathroom / Kitchen watertight Final Electrical: Energy Saving Light Bulbs 50% Safety glazing/Window in stairwells safety Final Survey Plot Plan glazing Arc Fault Breaker Habitable Spaces /Tamper Interior Smoke Detectors/Carbon Monoxide Proof Receptacles Detectors Flex Gas Pipe Bonding Every level: Every Bedroom: As Built Septic System / Sewer Dept. Inspection Outside every bedroom area: Sticker Inter Connected: Site Plan /Variance required Battery backup: Flood Plain Certification, if required Attic access 30" x 22" x 30" (height) in Okay to issue Temporary/Permanent accessible area Certificate of Occupancy OR Crawl Spaces 18"x 24" access,1 sq.ft.-150 sq. Certificate of Compliance ft. vents Yes No N/A Comments: Town of Queensbury Building & Code Enforcement Office No. (518) 761-8256 .✓-' t t t- t� aC/'t✓Tt . /kt,,t sa -• sW ;�t�t/,,�"�t c� W":",•t.sem 1�a�o'°a�,a';a�� ���'es t��a�:�, "ce to '�•��t. es`�....ati..t�at's.aSs�rti.'�v.,)._t.^. a.s�S�.'r�:ai,'a�ats a�k.�r:�ia�..,..,/. �ir�re .`,tia�cir.vr�.:ars X", MIDI.)LE I)EPARTNMENT INSPECTION AGENCY, INC. g .3174 *:,,,tf(',,,.; that the electrical wiring to the electrical equipment listed below has been examined and is approved as C ' eing in accord with the National Electrical Code, applicable governmental, utility and Agency rules in effect on the date i�y� �� • I Dted below and is issued subject to the following conditions. 1.$l r� ;� caner: Date: Chris Mackey 12/15/2014 �� t :r1 7` -) ^=. . ccupant: Location: r ^1 2nd Floor 15 Wild Turkey Lane U ccupancy: Queensbury, Warren Co. NY ' Single Family Dwg. „. /Applicant: ;4',$) Ct; Derricks Home Services LLC y� - ;;��a, t1De j 64 Sagamore St. !. �2�Sf1�8S1''=,-' - '''-�'2 '� Glens Falls, NY 12801 Ntff i,.V) _� r,, - 9loz . j -, lg 1t�� s....�-J ) kr j >> Joseph A.Holmes 6;� u` ��n7 <ql.1 .3 a (eJ No. 144017157075EL Cj ���� Equipment: Nph <<->> 1 - 100 -Amp. Sub Panel; 64 - Switches; 58 - Receptacles; 127 - Fixtures; 1 - Dishwasher; 2 - Dryers; 2 -20 Amp. (fib k..-; Receptacles; 2 -Vent Fans; 1 - 60 Amp Circuit For Outdoor Heat; 1 - Floor Heater tt 0s> 'in.!? (e?l * VI(�j - rr�� e1 . 6.4 0 k, r.: �. This certificate applies to the electrical wiring to the electrical equipment listed immediately null and void. This certificate applies only to the use.occupancy and ,:y� I [%0) above and the installation inspected as of the above noted date based on a visual ownership as indicated herein. Upon a change in the use,occupancy or ownership 449 4 inspection. No warranty is expressed or implied as to the mechanical safety. effi- of the property indicated above,this certificate shall be immediately null and void. <<%' �\ G: ciency or fitness of the equipment for any particular purpose. This certificate shall In the event that this certificate becomes invalid based upon the above conditions, S be valid for a period of one year from the above noted date. Should the electrical this certificate may be revalidated upon reinspection by Middle Department i ,V system to which this certificate applies be altered in any way,including but not limit- Inspection Agency, Inc. An application for inspection must be submitted to Middle (fi; ( ') ed to, the introduction of additional electrical equipment and/or the replacement of Department Inspection Agency, Inc. to initiate the inspection and revalidation rye 0 any of the components installed as of the above noted date.this certificate shall be process. A fee will be charged for this service. 0 Rough Plumbing / Insulation Inspection Report Office No. (518) 761-8256 Date Inspection request received: Queensbury Building & Code Enforcement Arrive: a 742 Bay Road, Queensbury, NY 12804 Inspector's Initials: y' 141- NAME: M61 e,5 PERMIT #: / - L g LOCATION: /, (}0 t Id `'L(E K (2.j k vl INSPECT ON: 3 ir TYPE OF STRUCTURE: R S Add 1-1' 100n Y N N/A Plumbing under slab Rough Plumbing /Nail Plates Plumbing Vent/Vents in Place 11/2 inch minimum Drain Size Washing Machine Drain 2 inch minimum Cleanout every 100 feet / change of direction Pressure Test Drain /Vent Air/ Head 5 P.S.I. for 10 ft. above highest connection for 15 minutes Pressure Test Water Supply Piping Air/ Head 50 P.S.I. for for 1.5-m4ut s Insulation / t ential Che / Commercial Check i-• Window Se Tyvek or Similar Exterior Sealant Proper Vent, Attic Vent Door/ Window Sealed (No Insulation) Duct/ Hot Water Piping Insulation If required unheated spaces Combustion Air Supply for Furnace Duct work sealed properly/ No duct tape Blower Door Test Air Sealing COMMENTS: Rough Plumbing_Insulation Inspection_02 05 13 IIAir-Tite Insulation Systems 19 Tanglewood Drive Phone: 518-361-3678 South Glens Falls, N.Y. 12803 Fax: 518-792-2158 E-mail: airtiteinsulation©adelphia.net Fax Transmittal Farm To: Teakwood Builders From: Kevin Lingel Attn: Jim Sasko Date Sent:: 3/7/14 No. of pages: 1 Mackey Residence Addition Turkey Hill Lane Lake George, N.Y. 1. Installed faced R-21 fiberglass batt insulation to all new exterior wood framed walls. 2. Sprayed the underside of roof addition with 7" (R-49) of closed cell foam insulation. 3. Sprayed foam sealant around all addition windows and doors. 4. Sprayed 2" (R-14) of closed cell foam to lake side walls and then installed unfaced (R-15) fiberglass batt insulation over foam for a total R-value of 29. Per Lift Application Applicators should apply a maximum pass thickness of 2 inches,with a minimum of 30 minutes between passes. Health and Safety Information Appropriate literature has been assembled which pro- vides information concerning the health and safety precautions that must be observed when handling materials used to produce foam made.with the Bayseal CC X system. Before working with this product,you must read and become familiar with the available information on its risks,proper use and handling. This cannot be overemphasized.Informa- tion is available in several forms,e.g.,material safety data sheets,product labels,and safe use and handling guidelines. More resources are available at spray- polyurethane.com,polyurethane.org,sprayfoam.org, baycareonline.com,or by contacting the Bayer Ma- terialScience Product Safety and Regulatory Affairs Department in Pittsburgh, PA. Note: The information contained in this bulletin is current as of October 2011,please contact Bayer MaterialScience to determine whether this publication has been revised. Bayer MaterialScience LLC 100 Bayer Road • Pittsburgh,PA 15205-9741 • Phone:1-800-662-2927 • www.spf.bayermaterialscience.com The manner in which you use and the purpose to which you put and daze our products,technical assistance and information(whether verbal,written or by way of production evaluations).inducing any suggested formulations and recommendations,are beyond ourcontrd.Therefore,it is imperative that you test our products,technical assistance and information to determine to your own satisfaction whether our products,technical assistance and information are suitable for your intended uses and applications.This application-specific analysis must at least indude testing to determine suitability from a technical as well as heath, safety,and environmental standpoint.Such testing has not necessarily been done by us.Unless we otherwise agree in writing,all products are sold stridly pursuant to the terms of our standard conditions of sale which are available upon request.All information and technical assistance is given without warranty or guarantee and Is subject to change without notice.tt Is expressly understood end agreed that you assume and hereby expressly release us from all liability, in tort,contract or otherwise,incurred in connection with the use of our products,technical assistance,and information.Any statement or recommendation not contained herein Is unauthorized and shall not bind us.Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or Its use.No license is implied or in fact granted under the claims of any patent. Sales Offices 2400 Spring Steubner Road West,Spring,TX 77389 • 1-800-221-3626 • Fax 1-281-288-6450 Bayseal CC X 10/11 Page 4 of 4—Document contains important information and must be read in its entirety. Processing Equipment Thermal Barrier 2:1 transfer pumps are recommended for material The International Building Code and International transfer from container to the proportioner.The plural Residential Code require that SPF be separated from component proportioner must be capable of supply- the interior of a building by an approved fifteen ing each component within±2%of the desired 1:1 (15)minute thermal barrier,such as 1/2"gypsum mixing ratio by volume. I-Iose heaters should be wall board or equivalent,installed per manufacturer's set to deliver 120°F to 135°F materials to the spray instructions and corresponding code requirements. gun. These settings will ensure thorough mixing in The International Building Code allows for omission the spray gun mix chamber in typical applications. of the prescribed thermal barrier in certain instance, Optimum hose pressure and temperature will vary such as: with equipment type and condition,ambient and sub- strate conditions,and the specific application.It is the •attics and crawlspaces with limited access responsibility of the applicator to properly interpret •approval by way of diversified testing,such equipment technical literature,particularly informa- as room corner protocols tion that relates to the acceptable combinations of gun chamber size,proportioner output,and material Local building codes may vary and must be consulted pressures.The relationship between proper chamber for applicability of thermal barrier exceptions. size and the capacity of the proportioner's pre-heater is critical.Mechanical purge spray guns(specifically direct impingement or DI type)are recommended for Handling Information highest foam quality. Applicators should ensure the safety of the jobsite and construction personnel by posting appropriate CAUTION:Extreme care must be taken when signs warning that all"hot work"such as welding, removing and reinstalling drum transfer pumps so soldering,and cutting with torches should not take as NOT to reverse the"A"and"B"components. place until a thermal barrier or approved equivalent is installed over any exposed polyurethane foam. Processing Parameters and Vapor Retarder Physical Characteristics Pre-heater Temperature: "A"and"B"120-135°F Bayseal CC X system qualifies as a vapor retarder Hose Temperature: "A"and"B" 120-135°F as defined by the International Code Council and Pressures: 1000-1500 psi(dynamic)* ASI-IR.AE(Class II)at a minimum thickness of one Mix Ratio Parts: 1 to 1 by volume"A"to"B" inch.Building construction types with a persistent, Viscosity at 75°F 400-500 cps"B'Component high moisture drive require additional moisture re- Shelf Life 3 months Q 65°F to 80°F mediation.The contractor should consult local build- ing codes to establish the vapor retarder requirement. *Dependent upon hose length. Page 3 of 4—Document contains important information and must be read in its entirety. Typical Physical Properties* Properties Test Method Value Fungi Resistance: ASTM G-21 Zero Rating R Value(aged): ASTM C-518 6.9 at 1 inch 24 a1 3.5 inches 38 at 5.5 inches' 54 at 7.9 inches' Compressive Strength: ASTM D-1621 25 psi{nominal) Core Density: ASTM 0-1622 2.0 IbsJft (nominal) Closed Cell Content: ASTM 0-2856 >90% _ Tensile Strength: ASTM D-1623 60 psi(nominal) Moisture Vapor Transmission {Permeance): ASTM E-98 0.80 Perms at 1' 0.23 Perms at 3.5" 0.14 Perms at 5.5' 0.10 Perms at 7.9" Water Absorption ASTM D-2842 <2% Dimensional Stability: ASTM 0-2126 <10% (158°F&97%R.H.) %Change in Volume Air Leakage Rate: ASTM E-2178 <0.02 L s^m-' Surface Burning Characteristics" ASTM E-84 Flame Spread Index <25 4-inches Smoke Developed Index<450 •These items are provided as general information only.They are approximate values and are not part of the product specifications. '•These numerical flame spread values are not a true reflection on how this or any material will perform in actual fire conditions. • Values extrapolated from 3.5-inch thick sample testing. Environmental Consideration and Wind velocities in excess of 12 miles per hour may Substrate Temperatures result in excessive loss of exotherm and interfere Applicators must recognize and anticipate environ- with the mixing efficiency,affecting foam surface, mental conditions prior to application to ensure the cure,and physical properties and will cause over- highest quality foam and to maximize yield.Ambient spray.Precautions must be taken to prevent damage air and substrate temperature,moisture,and wind to adjacent areas from overspray. velocity are all critical determinants of foam quality • and selection of the appropriate reactivity formula- tion.Variations in ambient air and substrate tempera- ture will influence the chemical reaction of the two Storage Conditions components,directly affecting the expansion rate, Store at 70°F to 80°F in a dry and well ventilated amount of rise,yield,adhesion and the resultant area,a minimum of 48 hours prior to application of physical properties of the foam insulation. material.Materials in containers should be main- tained at 65°F to 85°F while in use.Conditioned To obtain optimum results,the Bayseal CC X sys- trailers or tanks may be necessary.Material tempera- tern should only be spray-applied to substrates when ture should be confirmed with a thermometer or an ambient air and surface temperatures fall within the infrared gun.Do not configure equipment to recircu- range of 30°F and 120°F.All substrates to be sprayed late Bayseal CC X system components from propor- must be free of dirt,soil,grease,oil and moisture tioner back into drum.Do not recirculate or mix other prior to application.Moisture in any form:exces- suppliers'"A"or"B"component into Bayseal CC X sive humidity(>85%R.H.),rain,fog,or ice will system containers. react chemically and will adversely affect system performance and corresponding physical properties. Application should not take place when the ambient CAUTION'If components arc below suggested temperature is within 5°F of the dew point. Primers temperatures,the increased viscosity of the corn- may be necessary depending upon conditions;consult ponents may cause pump cavitation resulting in a Bayer MaterialScience LLC technical service rep- unacceptable SPF application. If components are resentative. above suggested temperatures,there may be loss of blowing agent resulting in diminished yield. Page 2 of 4—Document contains important information end must be reed in its entirety. BAYER Bayer MaterialScience BAYSEALTM CC X Product Information Spray Applied Polyurethane Foam Insulation Division 7-Thermal and Moisture Protection Product Description Bayseal CC X foam-forming system is available Bayseal closed-cell X(CC X)spray-applied poly- in two grades for warm and cold weather applica- urethane foam insulation is a two component,HFC- tions;suggested ambient substrate temperatures are 245fa blown,medium density,structural system specified below: designed for commercial,industrial and residential insulation applications. System Substrate/Ambient Temperature Bayseal CC X 50°F to 120°F Closed-cell polyurethane foam yields a high R-value Bayseal CC XP 30°F to 80°F and may help minimize air and moisture infiltration. This product may also help to control problems as- sociated with moisture vapor drive.The fluid applied, expanding nature of Bayseal CC X foam-forming Recommended Uses system during application may also contribute to Walls Unvented Attics increased performance value by helping to seal the Ceilings Floors building envelope. Vented Attics Piping Unvented Crawl Spaces Vented Crawl Spaces The Bayseal CC X foam-forming system is corn- Foundations Concrete Slabs prised of an"A"component or aromatic diisocyanate Ducts Tanks manufactured by Bayer MaterialScience LLC and a Cold Storage Freezers blended"B"component which includes polyols,fire Coolers retarding materials,and additives. As with any product,use of Bayseal CC X foam- forming system must be tested(including,but not Bayseal CC X system has passed the International limited to,field testing)in advance by the user to Code Council Acceptance Criteria 377,for spray- determine suitability. applied polyurethane foam insulation,Appendix X for use without the use of the prescribed ignition bar- rier and without the need for additional fire resistant coating. Page 1 of 4—Document contains important information and must be read in its entirety. Rough Plumbing / Insulation Inspection Report Office No. (518) 761-8256 Date Inspection request received: Queensbury Building & Code Enforcement Arrive: ar /.pn� 742 Bay Road, Queensbury, NY 12804 Inspector's Initials: NAME: I` CPERMIT #: / 3J LOCATION: / Lc, f I a /K('� INSPECT ON: gAir TYPE OF STRUCTURE: Y N N/A Plumbing under slab Rough Plumbing / Nail Plates Plumbing Vent/Vents in Place 11/2 inch minimum Drain Size Washing Machine Drain 2 inch minimum Cleanout every 100 feet /change of direction Pressure Test Drain /Vent Air/ Head 5 P.S.I. for 10 ft. above highestconnection for 15 minutes Pressure Test Water Supply Piping Air / Head 50 P.S.I. for for 15 minutes Insulation / Residential Check / Commercial Check Window Sealing 7,L/e'ne-).) Tyvek or Similar Exterior Sealant u7 7C'41•1- Proper Vent, Attic Vent Door/ Window Sealed (No Insulation) Duct / Hot Water Piping Insulation If required unheated spaces Combustion Air Supply for Furnace Duct work sealed properly/ No duct tape Blower Door Test Air Sealing COMMENTS: Rough Plumbing_Insulation Inspection_02 05 13 Air-Tite Insulation Systems Inc Invoice 19 Tanglewood Drive South Glens Falls, NY 12803 Date Invoice# 3/6/2014 003-631 Bill To Teakwood Builders. Inc. 8 Butler Place Saratoga Springs,N.Y. 12866 P.O. No. Terms Project • Description Amount Spray Polyurethane Foam(SPF)Insulation- Mackey Addition 16,450.00 1. Installed faced R-21 fiberglass batt insulation to all new exterior wood framed walls. 2.Sprayed the underside of roof addition with approximately 7"(R-49)with closed cell foam insulation. 3.Sprayed foam sealant around all addition windows and doors. Price$16.000 4. Extra to flash and batt lake side walls. $450 "Thank you for your business. Total $16.450.00 Payments/Credits $0.00 Balance Due $16.450.00 Phone# Fax# E-mail (518)361-3678 (518)792-2158 airliteinsulation@adelphia.net ,, 162 Jay Street www.SynthesisLLP.com SYNTHESIS Schenectady, New York 12305 518 370-1576 • Fax 518 370-1578 March 06, 2014 Building Inspector Office of Building and Codes Town of Queensbury 742 Bay Road Queensbury, New York 12804 Re: Permit#13-478 Mackey Residence Building Inspector: Please be advised that due to the improved U-Factor of the windows that were actually installed in the wall facing the lake of the Mackey Residence addition, a revised version of the ResCheck Report was necessary to reflect the change.This change improved the performance of the building by 4.3%. Please let me know if additional information is required. Sincerely, Volker Husel, Project Manager Project Manager /j Synthesis LLP 162 Jay Street,Schenectady NY 12305 vhusel@synthesisllp.com Tel: (518) 370 1576 Fax: (518) 370 1578 r:4 REScheck Software Version 4.4.4 Compliance Certificate Project Title: Mackey Residence Addition Energy Code: 2010 New York Energy Conservation Location: Warren County, New York Construction Type: Singe-family Project Type: Addition Heating Degree Days: 7635 Climate Zone: 6 Permit Date: 10-18-13 Construction Site: Owner/Agent: Designer/Contractor: 15 Wild Turkey Lane Chris Mackey Volker Husel Queensbury,NY 12845 15 Wild Turkey Lane Synthesis Architects LLP Queensbury,NY 12845 162 Jay Street Schenectady,NY 12301 (518)370 1576 vhusel@synthesisllp.com Compliance: Passes using UA trade-off Compliance: 5.0%Better Than Code Maximum UA: 419 Your UA:398 The%Better or Worse Than Code Index reflects how Gose to compliance the house is based on code trade-off rules. It DOES NOT provide an estimate of energy use or cost relative to a minimum-code home. Envelope Assemblies Gross Cavity Cont. Glazing Assembly Area or R-Value R-Value or Door UA Perimeter U-Factor Wall 1:Wood Frame, 16"o.c. 2,040 21.0 0.0 82 Window 1:Wood Frame:Double Pane with Low-E 460 0.280 129 Door 1:Solid 40 0.460 18 Door 2:Glass 93 0.330 31 Ceiling 1:Flat Ceiling or Scissor Truss 1,940 54.4 0.0 49 Basement Wall 1:Solid Concrete or Masonry 198 15.0 2.5 11 Wall height:7.5' Depth below grade:5.0' Insulation depth:7.5' Crawl 1:Solid Concrete or Masonry 100 0.0 5.0 10 Wall height:5.6' Depth below grade:3.5' Insulation depth:4.0' Floor 1:All-Wood Joist/Truss:Over Unconditioned Space 100 19.0 0.0 5 Floor 2:All-Wood Joist/Truss:Over Unconditioned Space 1,850 28.0 0.0 63 Project Title: Mackey Residence Addition Report date: 03/06/14 Data filename: H:12013 Projects12013016.00 Mackey Residence-Queensbury NY\Docs\Code&Zoning\Rescheck- Page 1 of 7 Mackey.rck • • Compliance Statement: The proposed building design described here is consistent with the building plans,specifications,and other calculations submitted with the permit application.The proposed building has been designed to meet the 2010 New York Energy Conservation Construction Code requirements in REScheck Version 4.4.4 and to comply with the mandatory requirements listed in the REScheck Inspection Checklist. Volker Husel, Project Manager 03/06-14 Name-Title Synthesis Architect LLP Signature Date Project Title: Mackey Residence Addition Report date: 03/06/14 Data filename: H:12013 Projects12013016.00 Mackey Residence-Queensbury NY\Docs\Code&Zoning\Rescheck- Page 2 of 7 Mackey.rck riCREScheck Software Version 4.4.4 ti Inspection Checklist Requirements: 0.0% were addressed directly in the REScheck software Text in the"Comments/Assumptions"column is provided by the user in the REScheck Requirements screen. For each requirement,the user certifies that a code requirement will be met and how that is documented,or that an exception is being claimed.Where compliance is itemized in a separate table,a reference to that table is provided. 2010 New Plans Verified Field Verified York Pre-Inspection/Plan Review Value Value Complies? Comments/Assumptions Energy 103.2 Construction drawings and ❑Complies [PR1]1 documentation sufficiently ❑Does Not Comply demonstrates energy code ❑Not Observable compliance for the building envelope. ENot Applicable 103.2, Construction drawings and ❑Complies 403.7 documentation sufficiently EDoes Not Comply [PR3]1 demonstrates energy code ENot Observable compliance for lighting and ENot Applicable mechanical systems.Systems serving multiple dwelling units must demonstrate compliance with the commercial code. 403.6 Heating and cooling equipment is Heating: Heating: EComplies [PR2]2 sized per ACCA Manual S based on Btu/hr Btu/hr ❑Does Not Comply loads per ACCA Manual J or other Cooling: Cooling: ENot Observable approved methods. Btu/hr Btu/hr ENot Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Mackey Residence Addition Report date: 03/06/14 Data filename: H:12013 Projects12013016.00 Mackey Residence-Queensbury N 1Docs\Code&Zoning\Rescheck- Page 3 of 7 Mackey.rck • 2010 New York Foundation Inspection Complies? Comments/Assumptions Energy 303.2.1 Exposed foundation insulation protection. EComplies [F011]2 ❑Does Not Comply ❑Not Observable ['Not Applicable 403.8 Snow melt controls. ❑Complies [F012]2 ❑Does Not Comply SNot Observable ❑Not Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Mackey Residence Addition Report date: 03/06/14 Data filename: H:12013 Projects12013016.00 Mackey Residence-Queensbury NY\Docs\Code&Zoning\Rescheck- Page 4 of 7 Mackey.rck • 2010 New Plans Verified Field Verified York Framing/Rough-In Inspection Value Value Complies? Comments/Assumptions Energy , 402.4.4 Fenestration that is not site built is EComplies [FR20]' listed and labeled as meeting ❑Does Not Comply AAMA/WDMA/CSA 101/I.S.2/A440 or [Not Observable has infiltration rates per NFRC 400 ENot Applicable that do not exceed code limits. 402.4.5 IC-rated recessed lighting fixtures ❑Complies [FR16]2 sealed at housing/interior finish and ❑Does Not Comply labeled to indicate&It;=2.0 cfm ENot Observable leakage at 75 Pa. ❑Not Applicable 403.2.1 Supply ducts in attics are insulated to R- R- ❑Complies [FR12]' R-8.All other ducts in unconditioned R_ R- ❑Does Not Comply spaces or outside the building ENot Observable envelope are insulated to R-6.Not ENot Applicable applicable if all systems are ductless. 403.2.2 All joints and seams of air ducts,air EComplies [FR13]' handlers,filter boxes,and building ❑Does Not Comply cavities used as return ducts are ENot Observable s sealed. ENot Applicable 403.2.3 Building cavities are not used as ducts EComplies [FR15]3 or plenums. ❑Does Not Comply ❑Not Observable ENot Applicable 403.3 HVAC piping conveying fluids above R- R- EComplies [FR17]2 105°F or chilled fluids below 55°F ❑Does Not Comply are insulated to R-3. ENot Observable ENot Applicable 403.4 Circulating service hot water pipes are R- R- ❑Complies [FR18]2 insulated to R-2. ❑Does Not Comply ❑Not Observable • ['Not Applicable 403.5 Automatic or gravity dampers are EComplies [FR19]2 installed on all outdoor air intakes and ❑Does Not Comply exhausts. ❑Not Observable -e ENot Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Mackey Residence Addition Report date: 03/06/14 Data filename: H:12013 Projects12013016.00 Mackey Residence-Queensbury NY\Docs\Code&Zoning\Rescheck- Page 5 of 7 Mackey.rck • 2010 New York Insulation Inspection Complies? Comments/Assumptions Energy 303.1 All installed insulation labeled or installed R- ❑Complies [IN13]2 values provided. ❑Does Not Comply ONot Observable plot Applicable Additional Comments/Assumptions: 1 I High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Mackey Residence Addition Report date: 03/06/14 Data filename: H:12013 Projects12013016.00 Mackey Residence-Queensbury NY1Docs\Code&Zoning\Rescheck- Page 6 of 7 Mackey.rck 2010 New Plans Verified Field Verified York Final Inspection Provisions Value Value Complies? Comments/Assumptions Energy 402.4.2, Building envelope tightness verified ACH 50= ACH 50= ❑Complies 402.4.2.1 by blower door test result of&It;7 ACH ❑Does Not Comply [FI17]1 at 50 Pa.This requirement may [Not Observable instead be met via visual inspection, in which case verification may need to [Not Applicable occur during Insulation Inspection. 402.4.3 Wood-burning fireplaces have EComplies [FI8]2 gasketed doors and outdoor ❑Does Not Comply combustion air. ❑Not Observable ['Not Applicable 403.2.2 Duct tightness via post-construction cfm cfm ❑Complies [F14]1 with maximum leakage of 8 cfm to ❑Does Not Comply outdoors,or 12 cfm across systems. ❑Not Observable For rough-in tests,verification may ❑Not Applicable need to occur during Framing Inspection,with maximum leakage of 6 cfm across systems and 4 cfm without air handler. 403.1.1 Programmable thermostats installed ❑Complies [FI9)2 on forced air furnaces. ❑Does Not Comply ❑Not Observable ❑Not Applicable 403.1.2 Heat pump thermostat installed on ❑Complies [FI10]2 heat pumps. ❑Does Not Comply ❑Not Observable ❑Not Applicable 403.4 Circulating service hot water systems ❑Complies [F111)2 have automatic or accessible manual ❑Does Not Comply controls. [Not Observable [Not Applicable 403.9.1 Readily accessible switch on heaters ❑Complies [F112]3 for swimming pools. ❑Does Not Comply ❑Not Observable ❑Not Applicable 403.9.2 Timer switches on pool heaters and ❑Complies [F119]3 pumps are present. ❑Does Not Comply ❑Not Observable [Not Applicable 403.9.3 Heated swimming pools have a cover. ❑Complies [FI20]3 Covers on pools heated over 90°F ❑Does Not Comply t,. are insulated to R-12. ['Not Observable ❑Not Applicable 401.3 Compliance certificate posted. ❑Complies [FI7]2 ❑Does Not Comply ['Not Observable ❑Not Applicable 303.3 Manufacturer manuals for mechanical ❑Complies [F118]3 and water heating equipment have ❑Does Not Comply been provided. [Not Observable ❑Not Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Mackey Residence Addition Report 03/06/14 Data filename: H:\2013 Projects12013016.00 Mackey Residence-Queensbury NY1Docs\Code&Zoning\Rescheck- Page 7 of 7 Mackey.rck 4'11,0011111 : ' li Town of Queensbury Fire Marshal 742 Bay Road ` 4,Pi., � I Queensbury,NY 12804 '`' _:`+r �\ 761-8205/761-8206 r (.1,--,;)0C1 / 1 fax 745-4437 At c_lP 1 ti,3 Factory-Built-Gas-Fireplace/Stove Inspection Report kiotice: New York State requires that all UL Listed,factory built appliances be installed according to the instructions and `` pecificatio s_cont 'tied in the Installation Manual accompanying the appliance.No deviation from the manufacturer's instructions or specifications is allowed. �,{ Ii Permi Permi rT/ chedule Inspection ���U(1L{ Time "�� pm anytime Inspecto / Name�� v� /1� _ Address / 01 /2 /V ( Rough Inr/ Final_ Appliance Manufacturer j��7/ �r Model# VllDV 6 -CJ5Z--- Direct Vent Factory Built Chimney Flue Size Double Wall Triple Wall Insulated X Yes No N/A Comments Floor Protection 4;%_ *- /3 p--P 4y1 lej Clearances to Combustibles (all sides) Firestop(s) Vertical Chase X Wall Penetration jl' Vent Clearances to Combustibles Vent/ Chimney Termination Chimney height must be 3 feet above roof penetration; 2 feet above any combustible construction within 10 feet Gas Shut-Off Valve /\//1 Combustion Air iX Hearth Extension (if any) -,'44‘4 J 1 Mantel .� j/>L.�,t1 - gUi,C //�� ‘4 - ‘/ Height above f/p opening /1e �� e iii,4�-5 g Witness Operation ; V / j .. ., +-- Tank Placement (if LP) • 7 •- "3 CO Detection I/ }} ie - - V CSST Bonding / __ White—Building Dept. Mellon—Customer Pink—Fire Marshal hi/ ors /- � Rough Plumbing / Insulation Inspection Report Office No. (518) 761-8256 Date Inspection request received: Queensbury Building & Code Enforcement Arrive: /1 am/pm 742 Bay Road, Queensbury, NY 12804 Inspector's Initials: LV)- NAME: 1XYLqI'tQ t3 PERMIT#: /3— 1, 'V LOCATION: 15 L )i/4.-Ic.0 r Ve INSPECT ON: 3-10-/y TYPE OF STRUCTURE: Fj &-3 ha 4- Y N N/A Plumbing under slab Rough Plumbing / Nail Plates Plumbing Vent/Vents in Place 11/2 inch minimum Drain Size Washing Machine Drain 2 inch minimum Cleanout every 100 feet/change of direction Pressure Test Drain /Vent Air/ Head 5 P.S.I. for 10 ft. above highest connection for 15 minutes Pressure Test Water Supply Piping Air/ Head 50 P.S.I. for for 15 minutes Insulation /Residential Check/Commercial Check r/ ^���l2 ojel Window Sealing - a„c. Tyvek or Similar Exterior Sealant Proper Vent, Attic Vent ' 2-1 Door/Window Sealed (No Insulation) Z k CL, ' Duct / Hot Water Piping Insulation If required unheated spaces !,✓ � Combustion Air Supply for Furnace /� / 7” r✓e.'�3 f' J c L Duct work sealed properly/ No duct tape (en /4 Blower Door Test Air Sealing q A1; COMMENTS: L,A. « C/;)ri ( // k I? v(/vL Rough Plumbing_Insulation Inspectian_02 05 13 Town of Queensbury Building & Code Enforcement MoilOffice No. (518) 761-8256 Framing / Firestopping Inspection Report Inspection request received: P--1 /.9-63 f`t Name: _ _ CSC-_ L- Inspected on: (/Oli . ebc r•r. '! Location: 1,3) [C t' _ Arrive: . 1 a.m.l p.m. Permit No.: c,((i) 3 ' 7. Inspector's Initi:"1.. TYPE OF STRUCTURE: �°A C 6.27) N NIA COMMENTS: .410111 Attic Access 22"x 30"minimum p�� ,57 8 , c� Jack Studs 1 Headers CALL>,' be& -\ Truss Specification Provided / Bracing I Bridging -- Joist hangers Jack Posts/Main Beams Exterior sheeting nailed properly 12"O.C. Headroom 6 ft.8 in. Stairwells 36 in.or more Exterior Deck Bracing Headroom 6 ft.8 in. Notches/Holes!Bearing Walls Metal Strapping for Notches Top Plate 1 '/2(w) 16 gauge(8) 16D nails each side Draft stopping 1,000 sq.ft.floor trusses Anchor Bolts 6 ft.or less on center Ice and water shield 24 inches from wall Fire separation 1,2,3 hour Fir fur Firestop in Q Penetration sealed 16 inch insulation in cavity min. Garage Fire Separation House side 1/2 inch or 5/8 inch Type X Garage side 5/8 inch Type X Ceiling/wall Windows Habitable Space/Bedrooms 24 in. (H) 20 in. (W) 5.7 sf above I below grade 5.0 sf grade Design Professional Sign-off,if required Framing/ Firestopping Inspection Report A,40 \, g14/ Rough Plumbing / Insulation Inspection Report Office No. (518) 761-8256 Date Inspection re t received: .2/-Za/� i'/ Queensbury Building & Code Enforcement Arrive: "- • am/pm 742 Bay Road, Queensbury, NY 12804 Inspector's ill s• NAME: (i a p PERMIT#: o / 3-47,e' LOCATION: J S L3-( INSPECT ON: 4kv'-? b. (W ) /(./ TYPE OF STRUCTURE: en 44 � 1 Y N N/A -- .C(Sk. Plumbing under slab -ough Plu i ''' : Nail Plates Plumbing Vent/Vents in Place 11/2 inch minimum Drain Size 1 'C, � -- Washing Machine Drain 2 inch minimum Cleanout every 100 feet/change of direction Pressure Test Drain /Vent Air/ Head 5 P.S.I. for 10 ft. above highest connection for 15 minutes Pressure Test Water Supply Piping Air/ Head 50 P.S.I. for for 15 minutes Insulation / Residential Check/Commercial Check Window Sealing Tyvek or Similar Exterior Sealant Proper Vent, Attic Vent Door/Window Sealed (No Insulation) Duct/ Hot Water Piping Insulation If required unheated spaces Combustion Air Supply for Furnace Duct work sealed properly/No duct tape Blower Door Test Air Sealing COMMENTS: L. Rough Plumbing_Insulation Inspection_02 05 13 Town of Queensbury Building & Code Enforcement 1✓3 Office No. (518) 761-8256 Framing I Firestopping Inspection Report Inspection request received: Name: C air I e3M ole K U Inspected on: Location: 1 (5 L, ) `r ld -t'�.c r Ket Arrive: i a.m./p.m. Permit No.: / g Inspector's Initials: TYPE OF STRUCTURE: rR s Asa eL Y " N N/A Q`� eQ I{wo ad )1,-Framing COMMENTS: g r> 'S d g Attic Access 22"x 30"minimum Jack Studs/Headers Truss Specifi .tion Provided Bracing :rid•i•. Joist hangers Jack Posts/Main Beams Exterior sheeting nailed properly 12"O.C. Headroom 6 ft.8 in. Stairwells 36 in.or more Exterior Deck Bracing 1 ' v Headroom 6 ft.8 in. �� �<.�� Notches/Holes I Bearing Walls dr Metal Strapping for Notches Top Platej 1 '/2(w)16 gauge(8) 16D nails each side U `"A I ✓ • Draft stopping 1,000 sq.ft.floor trusses Anchor Bolts 6 ft.or less on center Ice and water shield 24 inches from wall Fire separation 1,2,3 hour Fire wall 2,3,4 hour Firestopping Penetration sealed 16 inch insulation in cavity min. Garage Fire Separation House side 1/2 inch or 5/8 inch Type X Garage side 5/8 inch Type X Ceiling/wall Windows Habitable Space/Bedrooms 24 in.(H) 20 in.(W) 5.7 sf above/below grade 5.0 sf grade Design Professional Sign-off,if required Framing/ Firestopping Inspection Report Foundation Inspection Report Office No.(518)761-8256 Date Inspection request received: / /12/ 1 13 Queensbury Building&Code Enforcement Arrive: am/pm Depart: pm 742 Bay Rd.,Queensbury,NY 12804 Inspector's Initials Dcc.n' w(-5Q -Sa d NAME: PERMIT#: 13 U.� U LOCATION: A 's INSPECT ON: id.- !d/ /) TYPE OF STRUCTURE: � � , “) Q Comments Y N N/A Footings Piers Monolithic Slab Reinforcement in Place The contractor is responsible for providing protection from freezing for 48 hours following the placement of the concrete. Materials for this purpose on site. Foundation/Wallpour Reinforcement in Place Footing Dowels or Keyway in place Foundation Dampproofing Foundation Waterproofing Footing Drain Daylight or Sump Footing Drain Stone: 12 inch width / 6 inches above footing -6 mil poly for et areas under slab CF.Ca-ckfill'Approv • Plumbin er Slab PVC/Cast/Copper Foundation Insulation Interior/Exterior R- Rough Grade 6 inch drop� L:\Building&Codes Forms\Bulding&Codes\Inspection Forms\Foundation Inspection Report.doc Last printed 12/20/2005 9:24:00 AM c. Foundation Inspection Report /-". cD Office No.(518)761-8256 Date Inspection request received: Queensbury Building&Code Enforcement Arrive: am/pm Depart: am/p .4" 742 Bay Rd.,Queensbury,NY 12804 Inspector's Initials: e�. Com' v) NAME: rn 6)[ o. i y PERMIT#: j 3 - 7 2 LOCATION: l (A)/ /r Tit, j A /1 INSPECT ON: / , —/.7 TYPE OF STRUCTURE: /-) s d Comments Y N N/A Footings Piers Monolithic Slab Reinforcement in Place The contractor is responsible for providing protection from freezing for 48 hours following the placement of the concrete. � ViateriEal�for this purpose on site. Foundation/�llpour :f Reinforcement in Place Footing Dowels or Keyway in place t V Foundation Dampproofmg ,a4 V Foundation Waterproofing � nW� ���S Footing Drain Daylight or Sump `' Footing Drain Stone: 12 inch width 6 inches above footing 6 mil poly for wet areas under slab Backfill Approval Plumbing Under Slab PVC/Cast/Copper Foundation Insulation Interior/Exterior R- Rough Grade 6 inch drop within 10 ft. L:\Building &Codes Forms\Buliding&Codes\Inspectlon Forms\Foundation Inspection Report.doc Last printed 12/20/2005 9:24:00 AM Foundation Inspection Report Office No.(518)761-8256 Date Inspection request received: / /L U1 /3 Queensbury Building&Code Enforcement Arrive: am/pm Depart am/pm 742 Bay Rd.,Queensbury,NY 12804 Inspector's Initialtl_/ ;c ) NAME: 0/14 (I Q, Y PERMIT#: LOCATION: 1 Ud, I I '"LVZ ANC—INSPECT ON: Q� TYPE OF STRUCTURE: 4 -1-2 Conlmentl N N(A ootings Piers �1 L- -5�` '�c14C3"' -' Monolithic Slab T�C3 Reinforcement in Place The contractor is responsible for providing protection from freezing for 48 hours following the placement of the concrete. Materials for this purpose on site. Foundation/Wallpour Reinforcement in Place Footing Dowels or Keyway in place Foundation Dampproofmg Foundation Waterproofing Footing Drain Daylight or Sump Footing Drain Stone: 12 inch width 6 inches above footing 6 mil poly for wet areas under slab Backfill Approval Plumbing Under Slab PVC/Cast/Copper Foundation Insulation Interior/Exterior R- Rough Grade 6 inch drop within 10 ft. L:\Building &Codes Forms\Building&Codes\Inspection Forms\Foundation Inspection Report.doc Last printed 12/20/2005 9:24:00 AM Foundation Inspection Report Office No.(518)761-8256 Date Inspection request received: Et /IS ,If 3 t Queensbury Building&Code Enforcement Arrive: am/pm Depart:—?, - am/pm 742 Bay Rd.,Queensbury,NY 12804 Inspector's Initials: L L NAME: 1I) O C V Q PERMIT#: LOCATION: Th-) 1 ( i( itA24(4)1 L v-e_INSPECT ON: /71 TYPE OF STRUCTURE: Comments �r X/ I ,N/A oo�� \./ Piers Monolithic Slab Reinforcement in Place The contractor is responsible for providing protection from freezing for 48 hours following the placement of the concrete. Materials for this purpose on site. Foundation/Wallpour Reinforcement in Place l 1-4 Footing Dowels or Keyway in place Foundation Dampproofmg Foundation Waterproofing Footing Drain Daylight or Sump Footing Drain Stone: 12 inch width 6 inches above footing 6 mil poly for wet areas under slab Backfill Approval Plumbing Under Slab PVC/Cast/Copper Foundation Insulation Interior/Exterior R- Rough Grade 6 inch drop within 10 ft. L:\Building&Cafes Forms\Building&Codes\Inspection Forms\Foundation Inspection Report.doc Last printed 12/20/2005 9:24:00 AM