Loading...
ComCheck REVIEWED FOR ENERGY CODE COMPLIANCE COMcheck Software Version 4.0.7.2 Review Envelope Compliance Certificate (141 Project Information -1 ---- �I Energy Code: 2015 IECC I ;► JUL 0 3 2019 i Iji Project Title: Addictions Care Of Queensbury U Location: Glens Falls, New York ------..---_.. Climate Zone: 6a TOWN OF QUEENSBURY Project Type: Alteration BUILDING&CODES Vertical Glazing/Wall Area: 19% Construction Site: Owner/Agent: Designer/Contractor: 79 Glenwood Ave Keith Stack James Coleman Queensbury, NY 12804 The Addictions Care Center of hcp Architects LLP Albany, Inc 302 Washington Avenue Ext FILE COPY 90 McCarty Avenue Albany, NY 12203 Albany, New York, NY 12202 518-218-0614 jcoleman@hcpdesign.com Building Area Floor Area 1-Dormitory: Residential 4200 Envelope Assemblies R-Value Proposed Max.Allowed Post-Alteration Assembly Cavity Cont. U-Factor SHGC U-Factor SHGC Roof 1:Attic Roof with Wood Joists,[Bldg.Use 1-Dormitory], -- -- -- --- — -- Exemption:Framing cavity filled with insulation. NORTH Exterior Wall 1:Wood-Framed,16"o.c.,[Bldg.Use 1 - --- --- -- -- — — Dormitory],Exemption:Framing cavity filled with insulation. EAST Exterior Wall 3:Wood-Framed, 16"o.c.,[Bldg.Use 1 - -- --- -- --- — --- Dormitory],Exemption:Framing cavity filled with insulation. SOUTH Exterior Wall 2:Wood-Framed,16"o.c.,[Bldg.Use 1 - --- -- -- --- -- --- Dormitory],Exemption:Framing cavity filled with insulation. WEST Exterior Wall 4:Wood-Framed,16"o.c.,[Bldg.Use 1 - --- --- -- --- — -- Dormitory],Exemption:Framing cavity filled with insulation. Window 1:Wood Frame:Operable,Other,Operable,Operable, --- --- 0.330 0.400 0.430 0.400 [Bldg.Use 1 -Dormitory] Door 1:Other Door,Swinging,[Bldg.Use 1 -Dormitory) --- --- 0.200 --- 0.370 --- Door 2:Other Door,Swinging,[Bldg.Use 1 -Dormitory] -- -- 0.200 --- 0.370 --- (a)'Other'components require supporting documentation for proposed U-factors. (b)Fenestration product performance must be certified in accordance with NFRC and requires supporting documentation. Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 1 of 10 Envelope PASSES Envelope Compliance Statement Compliance Statement: The proposed envelope alteration project represented in this document is consistent with the building plans,specifications,and other calculations submitted with this permit applica ion.The proposed envelope systems have been designed to meet the 2015 IECC requirements in COMcheck Version 4.0.7.2 R= iew and to comply with any applicable m.ndatory requirements listed in the Inspection Checklist. //e�,,,�.t ��• / hIYt ♦ •A ► �� J�'J/ �t. ♦ ♦ lL — Name-Title ure Da 4. •• v • 46 Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 2 of 10 iCOMcheck Software Version 4.0.7.2 Review i Mechanical Compliance Certificate Project Information Energy Code: 2015 IECC Project Title: Addictions Care Of Queensbury Location: Glens Falls,New York Climate Zone: 6a Project Type: Alteration Construction Site: Owner/Agent: Designer/Contractor: 79 Glenwood Ave Keith Stack James Coleman Queensbury, NY 12804 The Addictions Care Center of hcp Architects LLP Albany, Inc 302 Washington Avenue Ext 90 McCarty Avenue Albany, NY 12203 Albany, New York, NY 12202 518-218-0614 jcoleman@hcpdesign.com Mechanical Systems List Quantity System Type&Description Mechanical Compliance Statement Compliance Statement: The proposed mechanical alteration project represented in this document is consistent with the building plans,specifications,and other calculations submitted with this permit application.The proposed mechanical systems have been designed to meet the 2015 IECC requirements in COMcheck Version 4.0.7.2 Review and to comply with any applicable mandatory requirements listed in the Inspection Checklist. Name-Title Signature Date Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 3 of 10 COMcheck Software Version 4.0.7.2 Review Inspection Checklist Energy Code: 2015 IECC Requirements: 0.0% were addressed directly in the COMcheck software Text in the"Comments/Assumptions" column is provided by the user in the COMcheck Requirements screen. For each requirement, the user certifies that a code requirement will be met and how that is documented, or that an exception is being claimed. Where compliance is itemized in a separate table,a reference to that table is provided. Section # Plan Review Complies? Comments/Assumptions &Req.ID C103.2 Plans and/or specifications provide all ❑Complies [PR1]1 information with which compliance ❑Does Not can be determined for the building envelope and document where ❑Not Observable exceptions to the standard are ❑Not Applicable claimed. C402.4.1 The vertical fenestration area<=30 ❑Complies [PR10]1 percent of the gross above-grade wall ODoes Not area. ❑Not Observable DNot Applicable C402.4.1 The skylight area<=3 percent of the ❑Complies [PR11]1 gross roof area. DDoes Not ❑Not Observable ❑Not Applicable C405.6 Group R-2 dwelling units have ❑Complies [PR16]1 separate electrical meters. ❑Does Not :Not Observable ❑Not Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 4 of 10 Section # Footing/Foundation Inspection Complies? Comments/Assumptions & Req.ID C303.2.1 Exterior insulation protected against ❑Complies [FO6]1 damage,sunlight, moisture,wind, Does Not landscaping and equipment ❑Not Observable maintenance activities. ❑Not Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 5 of 10 • Section # Framing/Rough-In Inspection Complies? Comments/Assumptions & Req.ID C303.1.3 Fenestration products rated in ❑Complies [FR12]2 accordance with NFRC. ❑Does Not ONot Observable ONot Applicable C303.1.3 Fenestration products are certified as ❑Complies [FR13]' to performance labels or certificates ❑Does Not provided. ONot Observable ONot Applicable C402.4.3 Vertical fenestration SHGC value. ❑Complies See the Envelope Assemblies table for values. [FR10]' ❑Does Not ONot Observable ❑Not Applicable C402.4.3, Vertical fenestration U-Factor. OComplies See the Envelope Assemblies table for values. C402.4.3. ❑Does Not 4 ' ONot Observable [FR8] ❑Not Applicable C402.4.4 U-factor of opaque doors associated ❑Complies See the Envelope Assemblies table for values. [FR14]2 with the building thermal envelope ❑Does Not meets requirements. :Not Observable ❑Not Applicable C402.5.1 The building envelope contains a ❑Complies [FR16]' continuous air barrier that is sealed in ❑Does Not an approved manner and either [Not Observable constructed or tested in an approved manner.Air barrier penetrations are ❑Not Applicable sealed in an approved manner. C402.5.2, Factory-built fenestration and doors ❑Complies C402.5.4 are labeled as meeting air leakage ❑Does Not [FR18]3 requirements. ONot Observable ONot Applicable C402.5.7 Vestibules are installed on all building ❑Complies [FR17]3 entrances. Doors have self-closing ❑Does Not devices. ONot Observable ❑Not Applicable Additional Comments/Assumptions: Ill High Impact(Tier 1) Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 6 of 10 • Section # Mechanical Rough-In Inspection Complies? Comments/Assumptions & Req.ID C402.5.5, Stair and elevator shaft vents have ❑Complies C403.2.4. motorized dampers that automatically ❑Does Not 3 (MEW close. :Not Observable ❑Not Applicable C402.5.5, Outdoor air and exhaust systems have ❑Complies C403.2.4. motorized dampers that automatically ❑Does Not 3 shut when not in use and meet (ME58]3 maximum leakage rates.Check ❑Not Observable gravity dampers where allowed. ❑Not Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 7 of 10 Section # Insulation Inspection Complies? Comments/Assumptions & Req.ID C303.1 Roof insulation installed per ❑Complies (IN3]1 manufacturer's instructions.Blown or ❑Does Not poured loose-fill insulation is installed only where the roof slope is<=3 in ONot Observable 12. ONot Applicable C303.1 Building envelope insulation is labeled ❑Complies [IN10]2 with R-value or insulation certificate ❑Does Not providing R-value and other relevant data. ONot Observable ONot Applicable C303.2 Above-grade wall insulation installed ❑Complies [IN7]1 per manufacturer's instructions. ❑Does Not ONot Observable ONot Applicable C303.2.1 Exterior insulation is protected from ❑Complies [1N14]2 damage with a protective material. ❑Does Not Verification for exposed foundation insulation may need to occur during ONot Observable Foundation Inspection. ONot Applicable C402.2.1 Insulation intended to meet the roof ❑Complies [IN17]3 insulation requirements cannot be ❑Does Not installed on top of a suspended ceiling.Mark this requirement ['Not Observable compliant if insulation is installed ONot Applicable accordingly. C402.2.3 Above-grade wall insulation R-value. ❑Complies See the Envelope Assemblies table for values. [IN6]1 ❑Does Not [Not Observable ONot Applicable C402.2.6 Radiant panels and associated ❑Complies [IN18]3 components,designed for heat ❑Does Not transfer from the panel surfaces to the ONot Observable occupants or indoor space are insulated with a minimum of R-3.5. ONot Applicable C402.2.2 Roof R-value. For some ceiling ❑Complies See the Envelope Assemblies table for values. (IN2]1 systems,verification may need to ❑Does Not occur during Framing Inspection. ONot Observable ONot Applicable C402.5.1. All sources of air leakage in the ❑Complies 1 building thermal envelope are sealed, ODoes Not [IN1]1 caulked,gasketed,weather stripped or wrapped with moisture vapor- ONot Observable permeable wrapping material to ONot Applicable minimize air leakage. Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 8 of 10 Section Final Inspection Complies? Comments/Assumptions & Req.ID C402.5.3 Where open combustion air ducts ❑Complies [FI51]3 provide combustion air to open Does Not combustion fuel burning appliances, the appliances and combustion air ONot Observable opening are located outside the ONot Applicable building thermal envelope or enclosed in a room,isolated from inside the thermal envelope.Such rooms are sealed and insulated. C402.5.6 Weatherseals installed on all loading ❑Complies [FI3711 dock cargo doors. ❑Does Not :Not Observable ONot Applicable C402.5.8 Recessed luminaires in thermal ❑Complies (FI2613 envelope to limit infiltration and be IC ❑Does Not rated and labeled.Seal between interior finish and luminaire housing. :Not Observable ONot Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 9 of 10 • Y Project Title: Addictions Care Of Queensbury Report date: 07/01/19 Data filename: Untitled.cck Page 10 of 10 'illArlfil COMcheck Software Version 4.1.1.0 Mechanical Compliance Certificate Project Information Energy Code: 2015 IECC Project Title: Addictions Care of Queensbury Location: Glens Falls, New York Climate Zone: 6a Project Type: Alteration Construction Site: Owner/Agent: Designer/Contractor: 79 Glenwood Avenue Paul Martin Queensbury, NY 12804 Sigma Psi Consulting 4 Collamer Road Malta, NY 12020 518-581-9428 paulm@sigmapsi.com Mechanical Systems List Quantity System Type&Description 2 HVAC System F1/F3(Single Zone): Heating:2 each-Central Fumace,Gas,Capacity=60 kBtu/h Proposed Efficiency=92.00%Et,Required Efficiency: 80.00%Et or 78%AFUE Cooling:2 each-Split System,Capacity=36 kBtu/h,Air-Cooled Condenser,Unknown Economizer Proposed Efficiency=13.00 SEER,Required Efficiency: 13.00 SEER Fan System: FAN SYSTEM 1 I Furnace F1 and F3--Compliance(Motor nameplate HP method):Passes Fans: FAN 1 Supply,Constant Volume, 1200 CFM,0.5 motor nameplate hp,0.0 fan efficiency grade 2 HVAC System F2/F4(Single Zone): Heating:2 each-Central Furnace,Gas,Capacity=60 kBtu/h Proposed Efficiency=92.00%Et,Required Efficiency: 80.00%Et or 78%AFUE Cooling:2 each-Split System,Capacity=30 kBtu/h,Air-Cooled Condenser,Unknown Economizer Proposed Efficiency=13.00 SEER,Required Efficiency: 13.00 SEER Fan System: FAN SYSTEM 2 I Furnace F2 and F4--Compliance(Motor nameplate HP method):Passes Fans: FAN 2 Supply,Constant Volume, 1000 CFM,0.5 motor nameplate hp,0.0 fan efficiency grade Mechanical Compliance Statement Compliance Statement: The proposed mechanical alteration project represented in this document is consistent with the building plans,specifications,and other calculations submitted with this permit application.The proposed mechanical systems have been designed to meet the 2015 IECC requirements in COMcheck Version 4.1.1.0 and to comply with any applicable mandatory requirements listed in the Inspection Checklist. ����� Paul Martin 7/2/19 Name-Title Signature Date P "E�'r iet,, 4,4evo Na'. Project Title: Addictions Care of Queensbury Report date: 07/02/19 Data filename: \\Spcserver\SPC_SERVER_DATA_G\Sigma_Psi\19124-ACCA-79-glenwood-CA-group\19124-hvac- Page 1 of 9 comcheck.cck Section Footing/Foundation Inspection Complies? Comments/Assumptions & Req.ID C403.2.4. Snow/ice melting system sensors for ❑Complies 5, future connection to controls. Freeze ❑Does Not C403.2.4. protection systems have automatic 6 controls installed. ❑Not Observable [FO9]3 ONot Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care of Queensbury Report date: 07/02/19 Data filename: \\Spcserver\SPC SERVER DATA G\Sigma Psi\19124-ACCA-79-glenwood-CA-group\19124-hvac- Page 3 of 9 comcheck.cck COMcheck Software Version 4.1.1.0 Inspection CCChecklist Energy Code: 2015 IE Requirements: 0.0% were addressed directly in the COMcheck software Text in the "Comments/Assumptions" column is provided by the user in the COMcheck Requirements screen. For each requirement, the user certifies that a code requirement will be met and how that is documented, or that an exception is being claimed. Where compliance is itemized in a separate table, a reference to that table is provided. Section Plan Review Complies? Comments/Assumptions &Req.ID C103.2 Plans, specifications, and/or ❑Complies [PR2]1 calculations provide all information ODoes Not with which compliance can be determined for the mechanical ❑Not Observable systems and equipment and ONot Applicable document where exceptions to the standard are claimed. Load calculations per acceptable engineering standards and handbooks. Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care of Queensbury Report date: 07/02/19 Data filename: \\Spcserver\SPC_SERVER DATA G\Sigma_Psi\19124-ACCA-79-glenwood-CA-group\19124-hvac- Page 2 of 9 comcheck.cck Section Plumbing Rough-In Inspection Complies? Comments/Assumptions & Req.ID C404.5, Heated water supply piping conforms ❑Complies C404.5.1, to pipe length and volume ODoes Not C404.5.2 requirements. Refer to section details. [PL6]3 ['Not Observable ❑Not Applicable C404.5, Heated water supply piping conforms ❑Complies C404.5.1, to pipe length and volume DDoes Not C404.5.2 requirements. Refer to section details. [PL6]3 ❑Not Observable ❑Not Applicable C404.6.3 Pumps that circulate water between a ❑Complies [PL7]3 heater and storage tank have controls ODoes Not that limit operation from startup to <= 5 minutes after end of heating ONot Observable cycle. ❑Not Applicable C404.6.3 Pumps that circulate water between a ❑Complies [PL7]3 heater and storage tank have controls ❑Does Not that limit operation from startup to <= 5 minutes after end of heating ❑Not Observable cycle. ❑Not Applicable C404.7 Water distribution system that pumps OComplies [PL8]3 water from a heated-water supply ODoes Not pipe back to the heated-water source through a cold-water supply pipe is a ❑Not Observable demand recirculation water system. ❑Not Applicable Pumps within this system have controls that start the pump upon receiving a signal from the action of a user of a fixture or appliance and limits the temperature of the water entering the cold-water piping to 104°F. C404.7 Water distribution system that pumps ❑Complies [PL8]3 water from a heated-water supply ODoes Not pipe back to the heated-water source through a cold-water supply pipe is a Not Observable demand recirculation water system. ❑Not Applicable Pumps within this system have controls that start the pump upon receiving a signal from the action of a user of a fixture or appliance and limits the temperature of the water entering the cold-water piping to 104°F. Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care of Queensbury Report date: 07/02/19 Data filename: \\Spcserver\SPC_SERVER_DATA_G\Sigma_Psi\19124-ACCA-79-glenwood-CA-group\19124-hvac- Page 4 of 9 comcheck.cck • Section # Mechanical Rough-In Inspection Complies? Comments/Assumptions & Req.ID C402.2.6 Thermally ineffective panel surfaces of OComplies [ME41]3 sensible heating panels have ODoes Not insulation >= R-3.5. ONot Observable ONot Applicable C403.2.13 Unenclosed spaces that are heated OComplies [ME71]2 use only radiant heat. ODoes Not ❑Not Observable [Not Applicable C403.2.3 HVAC equipment efficiency verified. OComplies See the Mechanical Systems list for values. [ME55]2 ODoes Not ONot Observable ONot Applicable C403.2.6. Demand control ventilation provided OComplies 1 for spaces >500 ft2 and >25 ODoes Not [ME59]1 people/1000 ft2 occupant density and served by systems with air side ONot Observable economizer, auto modulating outside ONot Applicable air damper control,or design airflow >3,000 cfm. C403.2.6. Enclosed parking garage ventilation DComplies 2 has automatic contaminant detection ODoes Not [ME115]3 and capacity to stage or modulate fans to 50%or less of design capacity. ['Not Observable ❑Not Applicable C403.2.7 Exhaust air energy recovery on DComplies [ME57]1 systems meeting Table C403.2.7(1) DDoes Not and C403.2.7(2). ONot Observable ONot Applicable C403.2.8 Kitchen exhaust systems comply with DComplies [ME116]3 replacement air and conditioned ['Does Not supply air limitations, and satisfy hood rating requirements and maximum Not Observable exhaust rate criteria. ONot Applicable C403.2.9 HVAC ducts and plenums insulated. OComplies [ME60]2 Where ducts or plenums are installed ODoes Not in or under a slab,verification may need to occur during Foundation Not Observable Inspection. ONot Applicable C403.2.9 Ducts and plenums sealed based on ❑Complies [ME10]2 static pressure and location. DDoes Not O Not Observable O Not Applicable C403.2.9. Ductwork operating >3 in. water OComplies 1.3 column requires air leakage testing. ODoes Not [ME11]3 ONot Observable ONot Applicable C403.2.9. Ductwork operating >3 in. water OComplies 1.3 column requires air leakage testing. DDoes Not [ME11]3 ONot Observable O Not Applicable C403.4.4. Multiple zone VAV systems with DDC OComplies See the Mechanical Systems list for values. 6 of individual zone boxes have static ODoes Not [ME110]3 pressure setpoint reset controls. :Not Observable ONot Applicable 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care of Queensbury Report date: 07/02/19 Data filename: \\Spcserver\SPC_SERVER_DATA_G\Sigma_Psi\19124-ACCA-79-glenwood-CA-group\19124-hvac- Page 5 of 9 comcheck.cck Section Mechanical Rough-In Inspection Complies? Comments/Assumptions & Req.ID C403.4.4. Multiple zone VAV systems with DDC ❑Complies See the Mechanical Systems list for values. 6 of individual zone boxes have static ❑Does Not [ME110]3 pressure setpoint reset controls. ['Not Observable ❑Not Applicable C408.2.2. Air outlets and zone terminal devices ❑Complies 1 have means for air balancing. ❑Does Not [ME53]3 ONot Observable ❑Not Applicable C403.5, Refrigerated display cases, walk-in ❑Complies C403.5.1, coolers or walk-in freezers served by ❑Does Not C403.5.2 remote compressors and remote [ME123]3 condensers not located in a :Not Observable condensing unit, have fan-powered ❑Not Applicable condensers that comply with Sections C403.5.1 and refrigeration compressor systems that comply with C403.5.2.. Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care of Queensbury Report date: 07/02/19 Data filename: \\Spcserver\SPC SERVER_DATA G\Sigma_Psi\19124-ACCA-79-glenwood-CA-group\19124-hvac- Page 6 of 9 comcheck.cck , ' Section Final Inspection Complies? Comments/Assumptions & Req.ID C303.3, Furnished O&M manuals for HVAC ❑Complies C408.2.5. systems within 90 days of system Does Not 3 acceptance. [F18]3 :Not Observable ❑Not Applicable C403.2.2 HVAC systems and equipment ❑Complies [FI27]3 capacity does not exceed calculated ❑Does Not loads. ❑Not Observable ❑Not Applicable C403.2.4. Heating and cooling to each zone is ❑Complies 1 controlled by a thermostat control. ❑Does Not [FI47]3 Minimum one humidity control device per installed ['Not Observable humidification/dehumidification ❑Not Applicable system. C403.2.4. Heating and cooling to each zone is ❑Complies 1 controlled by a thermostat control. ❑Does Not [F147]3 Minimum one humidity control device per installed ❑Not Observable humidification/dehumidification ❑Not Applicable system. C403.2.4. Thermostatic controls have a 5°F ❑Complies 1.2 deadband. ODoes Not [FI38]3 ONot Observable ❑Not Applicable C403.2.4. Temperature controls have setpoint ❑Complies 1.3 overlap restrictions. ❑Does Not [FI20]3 :Not Observable ❑Not Applicable C403.2.4. Each zone equipped with setback ❑Complies 2 controls using automatic time clock or ❑Does Not [F139]3 programmable control system. ❑Not Observable ❑Not Applicable C403.2.4. Automatic Controls: Setback to 55°F ❑Complies 2.1, (heat)and 85°F(cool); 7-day clock, 2- ❑Does Not C403.2.4. hour occupant override, 10-hour 2.2 backup ['Not Observable [F140]3 ❑Not Applicable C403.2.4. Systems include optimum start OComplies 2.3 controls. ❑Does Not [FI41J3 plot Observable ❑Not Applicable C403.2.4. Systems include optimum start ❑Complies 2.3 controls. ❑Does Not [FI41]3 [Not Observable ❑Not Applicable C408.2.1 Commissioning plan developed by ❑Complies [F128]' registered design professional or ❑Does Not approved agency. ❑Not Observable ❑Not Applicable C408.2.3. HVAC equipment has been tested to ❑Complies 1 ensure proper operation. ❑Does Not [FI31]' ❑Not Observable ❑Not Applicable 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care of Queensbury Report date: 07/02/19 Data filename: \\Spcserver\SPC_SERVER DATA_G\Sigma_Psi\19124-ACCA-79-glenwood-CA-group\19124-hvac- Page 7 of 9 comcheck.cck , Section Final Inspection Complies? Comments/Assumptions & Req.ID C408.2.3. HVAC control systems have been OComplies 2 tested to ensure proper operation, ODoes Not [FI10]' calibration and adjustment of controls. ❑Not Observable ❑Not Applicable C408.2.4 Preliminary commissioning report DComplies [FI29]' completed and certified by registered ❑Does Not design professional or approved agency. ❑Not Observable ❑Not Applicable C408.2.5. Furnished HVAC as-built drawings ❑Complies 1 submitted within 90 days of system ❑Does Not [F17]3 acceptance. ❑Not Observable ❑Not Applicable C408.2.5. An air and/or hydronic system ❑Complies 3 balancing report is provided for HVAC DDoes Not [FI43]' systems. ❑Not Observable ❑Not Applicable C408.2.5. Final commissioning report due to ❑Complies 4 building owner within 90 days of ❑Does Not [F130]' receipt of certificate of occupancy. DNot Observable ❑Not Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3) Project Title: Addictions Care of Queensbury Report date: 07/02/19 Data filename: \\Spcserver\SPC SERVER DATA_G\Sigma Psi\19124-ACCA-79-glenwood-CA-group\19124-hvac- Page 8 of 9 comcheck.cck • • Project Title: Addictions Care of Queensbury Report date: 07/02/19 Data filename: \\Spcserver\SPC_SERVER_DATA_G\Sigma_Psi\19124-ACCA-79-glenwood-CA-group\19124-hvac- Page 9 of 9 comcheck.cck Irit‘Al COMcheck Software Version COMcheckWeb 11 Interior Lighting Compliance Certificate Project Information Energy Code 2015 IECC Project Title: ACCA of Queensbury Project Type: New Construction Construction Site: Owner/Agent: Designer/Contractor: 79 Glenwood Ave. Queensbury, New York 12804 Additional Efficiency Package(s) Reduced interior lighting power. Requirements are implicitly enforced within interior lighting allowance calculations. Allowed Interior Lighting Power A B C D Area Category Floor Area Allowed Allowed (ft2) Watts / ft2 Watts 1-Dormitory 7000 0.51 3591 Total Allowed Watts = 3591 Proposed Interior Lighting Power A B C D E Fixture ID : Description / Lamp / Wattage Per Lamp / Ballast Lamps/ # of Fixture (C X D) Fixture Fixture Watt. 1-Dormitory LED: LED Panel 19W: 0 28 41 1148 LED: LED Panel 19W: 0 12 29 348 LED: LED Linear 8W: 0 4 41 164 LED: LED Linear 8W: 0 7 30 210 LED: LED Linear 8W: 0 11 34 374 LED: LED PAR 7W: 0 5 11 55 LED: LED PAR 7W: 0 1 10 10 Total Proposed Watts = 2309 Interior Lighting PASSES: Design 36% better than code Interior Lighting Compliance Statement Compliance Statement: The proposed interior lighting design represented in this document is consistent with the building plans, specifications, and other calculations submitted with this permit application. The proposed interior lighting systems have been designed to meet the 2015 IECC requirements in COMcheck Version COMcheckWeb and to comply with any applicable mandatory requirements listed in the Inspection Checklist. Paul J. Martin, PE `'°"�"°�-- 7/3/19 Name-Title Signature Date 4,0E NEwr (... ; 1/4���, , qt- ,,0..*.... :fi _ �ey.i40 SSIU J Project Title: ACCA of Queensbury Report date: 07/03/19 Data filename: Page 1 of 5 • '‘/Ifri COMcheck Software Version COMcheckWeb Exterior Lighting Compliance Certificate finfl Project Information Energy Code 2015 IECC Project Title: ACCA of Queensbury Project Type: New Construction Exterior Lighting Zone 2 (Residentially zoned area) Construction Site: Owner/Agent: Designer/Contractor: 79 Glenwood Ave. Queensbury, New York 12804 Allowed Exterior Lighting Power A B C D E Area/Surface Category Quantity Allowed Tradable Allowed Watts Watts / Wattage (B X C) Parking area 1000 ft2 0.06 Yes 60 Total Tradable Watts(a) = 60 Total Allowed Watts = 60 Total Allowed Supplemental Watts(b) = 600 (a)Wattage tradeoffs are only allowed between tradable areas/surfaces. (b)A supplemental allowance equal to 600 watts may be applied toward compliance of both non-tradable and tradable areas/surfaces. Proposed Exterior Lighting Power A B C D E Fixture ID : Description / Lamp / Wattage Per Lamp / Ballast Lamps/ # of Fixture (C X D) Fixture Fixture Watt. Parking area (1000 ft2): Tradable Wattage LED: LED Other Fixture Unit 6.5W: 0 4 40 160 Total Tradable Proposed Watts = 160 Exterior Lighting PASSES: Design 76% better than code Exterior Lighting Compliance Statement Compliance Statement: The proposed exterior lighting design represented in this document is consistent with the building plans, specifications, and other calculations submitted with this permit application. The proposed exterior lighting systems have been designed to meet the 2015 IECC requirements in COMcheck Version COMcheckWeb and to comply with any applicable mandatory requirements listed in the Inspection Checklist. �l Paul J. Martin, PE ��� 7/3/19 Name-Title Signature Date <4,-Va.4 � .tp rf' ,V 4. :i ik. °b y.i.01 '.rQo�pY Project Title: ACCA of Queensbury Report date: 07/03/19 Data filename: Page 2 of 5 .11 COMcheck Software Version COMcheckWeb Inspection Checklist Energy Code: 2015 IECC in11 Requirements: 100.0% were addressed directly in the COMcheck software Text in the "Comments/Assumptions" column is provided by the user in the COMcheck Requirements screen. For each requirement, the user certifies that a code requirement will be met and how that is documented, or that an exception is being claimed. Where compliance is itemized in a separate table, a reference to that table is provided. Section # Plan Review Complies? Comments/Assumptions & Req.ID _ C103.2 Plans, specifications, and/or ❑Complies Requirement will be met. [PR4J' calculations provide all information ❑Does Not with which compliance can be determined for the interior lighting Not Observable and electrical systems and equipment ❑Not Applicable and document where exceptions to the standard are claimed. Information provided should include interior lighting power calculations,wattage of bulbs and ballasts, transformers and control devices. C103.2 Plans, specifications, and/or ❑Complies Requirement will be met. [PR8]' calculations provide all information ❑Does Not with which compliance can be determined for the exterior lighting ['Not Observable and electrical systems and equipment ENot Applicable and document where exceptions to the standard are claimed. Information provided should include exterior lighting power calculations, wattage of bulbs and ballasts,transformers and control devices. C405.6 Group R-2 dwelling units have ❑Complies Requirement will be met. [PR16)' separate electrical meters. ❑Does Not ❑Not Observable ❑Not Applicable C406 Plans,specifications,and/or EComplies Requirement will be met. [PR9J' calculations provide all information ❑Does Not with which compliance can be determined for the additional energy ['Not Observable efficiency package options. ❑Not Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 !Medium Impact(Tier 2) 3 Low Impact(Tier 3) 1 Project Title: ACCA of Queensbury Report date: 07/03/19 Data filename: Page 3 of 5 Section Rough-In Electrical Inspection Complies? Comments/Assumptions & Re..ID C405.2.1 Lighting controls installed to uniformly ❑Complies Requirement will be met. [EL151' reduce the lighting load by at least ❑Does Not 50%. ❑Not Observable ❑Not Applicable C405.2.1 Occupancy sensors installed in ❑Complies Requirement will be met. [EL18)' required spaces. ❑Does Not ❑Not Observable ❑Not Applicable C405.2.1, Independent lighting controls installed ❑Complies Requirement will be met. C405.2.2. per approved lighting plans and all ❑Does Not 3 manual controls readily accessible and [EL23)2 visible to occupants. ❑Not Observable ❑Not Applicable C405.2.2. Automatic controls to shut off all ❑Complies Requirement will be met. 1 building lighting installed in all ❑Does Not [EL22]2 buildings. ❑Not Observable ❑Not Applicable C405.2.3 Daylight zones provided with ❑Complies Requirement will be met. [EL16)2 individual controls that control the ❑Does Not lights independent of general area lighting. ❑Not Observable ❑Not Applicable C405.2.3, Primary sidelighted areas are ❑Complies Requirement will be met. C405.2.3. equipped with required lighting ❑Does Not 1, controls. C405.2.3. ❑Not Observable 2 ❑Not Applicable (EL20)' C405.2.3, Enclosed spaces with daylight area ❑Complies Requirement will be met. C405.2.3. under skylights and rooftop monitors ❑Does Not 1, are equipped with required lighting C405.2.3. controls. ❑Not Observable 3 [Not Applicable [EL21)' C405.2.4 Separate lighting control devices for ❑Complies Requirement will be met. (EL4)' specific uses installed per approved ❑Does Not lighting plans. ❑Not Observable ❑Not Applicable C405.2.4 Additional interior lighting power ❑Complies Requirement will be met. [EL8)' allowed for special functions per the ❑Does Not approved lighting plans and is automatically controlled and pilot Obsen able separated fium yeneial liylrliny. ❑Not Applicable C405.2.5 Automatic lighting controls for exterior ❑Complies Requirement will be met. [EL25)"°" lighting installed. Controls will be ❑Does Not daylight controlled, set based on business operation time-of-day,or ❑Not Observable reduce connected lighting > 30%. ❑Not Applicable C405.3 Exit signs do not exceed 5 watts per ❑Complies Requirement will be met. [EL6)' face. ❑Does Not ❑Not Observable ❑Not Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 Medium Impact (Tier 2) 3 Low Impact(Tier 3) Project Title: ACCA of Queensbury Report date: 07/03/19 Data filename: Page 4 of 5 Section Final Inspection Complies? Comments/Assumptions & R• ..ID C303.3, Furnished O&M instructions for ❑Complies Requirement will be met. C408.2.5. systems and equipment to the ❑Does Not 2 building owner or designated Not Observable [FI1/]3 representative. ❑ ❑Not Applicable C405.4.1 Interior installed lamp and fixture ❑Complies See the Interior Lighting fixture schedule for values. [F118]' lighting power is consistent with what ❑Does Not is shown on the approved lighting plans, demonstrating proposed watts ❑Not Observable are less than or equal to allowed Observable„ Applicable watts. C405.5.1 Exterior lighting power is consistent ❑Complies See the Exterior Lighting fixture schedule for values. [FI19]' with what is shown on the approved ❑Does Not lighting plans,demonstrating proposed watts are less than or equal [Not Observable to allowed watts. ❑Not Applicable C408.2.5. Furnished as-built drawings for ❑Complies Requirement will be met. 1 electric power systems within 90 days ❑Does Not [F116]3 of system acceptance. ❑Not Observable ❑Not Applicable C408.3 Lighting systems have been tested to ❑Complies Requirement will be met. [F133]' ensure proper calibration, adjustment, ❑Does Not programming,and operation. Not Observable ❑Not Applicable Additional Comments/Assumptions: 1 High Impact(Tier 1) 2 'Medium Impact(Tier 2) 13 ILow Impact(Tier 3) Project Title: ACCA of Queensbury Report date: 07/03/19 Data filename: Page 5 of 5