Signed Inspection Report (02-18-2020) (4).pdfINSPECTION WORKSHEET (BINS-000921-2020)
Town of Queensbury - Building and Codes - Fire Marshal
742 Bay Road - (518) 761-8256 Building (518) 761-8206 Fire Marshal
Case Number:AST-0593-2019 Case Module:Permit
Inspection Date:Tue Feb 18, 2020 Inspection Status:Partial Pass
Inspector:John O'Brien Inspection Type:Building Insulation
Job Address:Parcel Number:133 Jenkinsville RD
Queensbury, NY, 12804
279.-1-21
Contact Type Company Name Name
Architect Rucinski-Hall Architecture
Granted Permission TOWN OF QUEENSBURY REC
DEPT
Primary Owner TOWN OF QUEENSBURY REC
DEPT
Concrete Contractor A.J. Catalfamo Construction Co., Inc.
Checklist Item Status
Building Inspector Notes Failed
2/3/20 Insulation Not Approved
Remaining Items:
- Remove a sheet of fire retardant plywood from each wall to verify the insulation in wall has been installed
correctly.
- Provide documentation that states that R38 insulation has been installed in ceiling and R21 has been installed in
the exterior walls as per the approved COMcheck Energy Code Compliance Report.
- Provide documentation that the windows and insulated door have the correct U value as per the approved
COMcheck Energy Code Compliance Report.
2/18/20 Insulation Partial Approval
- Insulation documentation received from manufacturer.
The installation verified and approved in accordance with the approved COMcheck.
Remaining Items:
- Provide documentation showing what the U value is for the windows and exterior doors.
- Verify perimeter of windows and doors have been sealed with sprayfoam.
- Schedule blower door test for addition.
Window Sealing Failed
Feb 18, 2020 Page (1)
INSPECTION WORKSHEET (BINS-000921-2020)
Checklist Item Status
U Factors = .3 cfm for windows, .5 cfm for doors Failed
Insulation Residential Check Commercial Check Failed
2/3/20 Insulation Not Approved
Remaining Items:
- Remove a sheet of fire retardant plywood from each wall to verify the insulation in wall has been installed
correctly.
- Provide documentation that states that R38 insulation has been installed in ceiling and R21 has been installed in
the exterior walls as per the approved COMcheck Energy Code Compliance Report.
- Provide documentation that the windows and insulated door have the correct U value as per the approved
COMcheck Energy Code Compliance Report.
2/18/20 Insulation Partial Approval
- Insulation documentation received from manufacturer.
The installation verified and approved in accordance with the approved COMcheck.
Remaining Items:
- Provide documentation showing what the U value is for the windows and exterior doors.
- Verify perimeter of windows and doors have been sealed with sprayfoam.
- Schedule blower door test for addition.
Blower Door Test Failed
Door / Window Sealed (No Insulation)Failed
Feb 18, 2020 Page (2)
O'Brien, John