2007-718 TOWN OF QUEENSBURY
742 Bay Road,Queensbury,NY 12804-5902 (518)761-8201
42 Community Development- Building &Codes (518) 761-8256
CERTIFICATE OF OCCUPANCY
Permit Number. P20070718 Date Issued: Wednesday, March 19, 2008
This is to certify that work requested to be done as shown by Permit Number P20070718
has been completed.
Location: 1 PINION PINE Ln
Tax Map Number. 523400-301-006-0001-041-000-0000
Owner CLARK & LESLIE WILKINSON
Applicant: CLARK & LESLIE WILKINSON
This structure may be occupied as a:
Residential Addition By Order of Town Board
TOWN OF QUEENSBURY
Issuance of this Certificate of Occupancy DOES NOT relieve the
property owner of the responsibility for compliance with Site Plan,
Variance, or other issues and conditions as a result of approvals by the Director of Building&Code Enforcement
Planning Board or Zoning Board of Appeals.
TOWN OF QUEENSBURY
742 Bay Road,Queensbury,NY 12804-5902 (518)761-8201
Community Development- Building&Codes (518) 761-8256
BUILDING PERMIT
Permit Number: P20070718 Application Number. A20070718
Tax Map No: 523400-3 01-006-0001-041-000-0000
Permission is hereby granted to: CLARK& LESLIE WILKINSON
For property located at: 1 PINION PINE Ln
in the Town of Queensbury,to construct or place
at the above location in accordance with application together with plot plans and other information hereto filed
and approved and in compliance with the NYS Uniform Building Codes and the Queensbury Zoning
Ordinance. Type of Construction Value
Owner Address: CLARK&LESLIE WILKINSON Residential Addition $50,000.00
1 PINION PINE Ln
QUEENSBURY,NY 12804-0000 Total value $50,000.00
Contractor or Builder's Name/Address Electrical Inspection Agency
Plans &Specifications
2007-718
484 SQ FT RESIDENTIAL ADDITION
$75.00 PERMIT FEE PAID- THIS PERMIT EXPIRES: Friday,November 28,2008
(If a longer period is required,an application for an extension must be made to the code Enforcement Officer
of the Town of Queensbury before the expiration date.)
Dated at the To otnsb November 28,2007
SIGNED BY '< for the Town of Queensbury.
Director of Building&Code Enforcement
Town of Queensbury Building & Codes Fee Schedule
Activity Fee
1 &2 Family Dwelling (includes septic system permit) $0.12 per sf
Additions: Commercial $0.14 per sf: Minimum$100 fee
Alterations: Commercial $0.12 per sf: Minimum$ 50 fee
Additions: Residential $0.12 per sf: Minimu $75 fee
Alterations: Residential $0.10 per sf: Minimum$40 fee
Boathouse w/Sundeck $50
Building Permit Renewal: Extends permit for period of 1 yr. $25
Certificate of Compliance & Use $20
Certificate of Occupancy No fee
Commercial, Industrial, Public Assembly, Day Care Center, etc. $0.15 per sf: No Maximum
Commercial/Industrial: Unheated structures (i.e,warehouse) $0.05 per sf: No Maximum
Deck, Porch 1 2 $0.10 per sf: Minimu $40
Demolition $20
Dock $30
Fire Marshal Inspection
$25 per inspection
(Includes Solid Fuel burn permit, installation of chimney/wood
$100 per special projects
stove)
Floodplain Development Permit $25
Garages $0.10 per sf: Minimum$30
House Moving Permit $30
Mobile Homes (includes septic system permit) $0.06 per sf
$25, Above Ground;$35, In-
Pool Ground
Septic Systems: Alteration or New System Only $25, Residential;$35, Commercial
Septic Variance (requires Town Board of Health review) $50
Sheds/Storage Structures, Pole Barn, Picnic Pavilion, Misc. $20 per inspection
Signs: Permanent $2 per sf
Signs: Temporary $ 10 per 12 days/$50 cash deposit
Townhouse, Condo,Apartments, Multi-family $0.14 per sf: Minimum$100
Revised 1-17-07
-----------------------------------
PROJECT NAME: % OFFICE USE ONLY
STAFF INITIALS:
BUILDING PERMIT SUBMISSION % DATE:
CHECKLIST FOR: '
MULTIPLE DWELLING or COMMERCIAL PROJECTS
1. Building Permit Application Completed? YES NO N /A
jEnergy Form or CheckMate Energy Code Compliance I 2' Forms Complete? (2-copies)
3.
Energy Code Inspector's Report from Checkmate
Program? (2-copies)
' Septic application completely filled out? I
4' (if applicable) I
5. Electrical Inspection Form complete?
I 6. I Two (2)sets of the plans each of the following: YES NO N /A
a. Floor plans (s)?
I b. Foundation plan? I j
c. Cross sections (s)?
} ; d. Elevations? j
e. Design loads including floor, snow load, and wind
load?
1 f. Seismic design (required after January 2003)? I
g. Plans signed and sealed by registered architect or
engineer?
I
h. Window and door schedule? —
I � 1
j Two(2) site plans showing location of the structure to be 1
i
built, location of well or water lines, location of septic { I 1
7' system or sewer line with all setbacks and separation
distances shown, and all improvements to the property? i
8. I Solid Fuel Burning or Gas Appliance Form (if applicable)? I I
1 9. Driveway Permit I 1
Town of Queensbury- Community Development Office- 742 Bay Road, Queensbury, NY 12804
I
7
-----------------------------------
(` OFFICE USE ONLY ;
PROJECT NAME: I
STAFF INITIALS: ;
BUILDING PERMIT SUBMISSION % DATE:
CHECKLIST FOR: ---------------
SINGLE FAMILY DWELLING
1. ' Building Permit Application Completed? ayE NO N /A
i
2 Energy Form or CheckMate Energy Code Compliance
Forms Complete? (2-copies)
3 Energy Code Inspector's Report from,Checkmate
Program? (2-copies)
4 Septic application completely filled out?
(if applicable)
—. _
5. Electrical Inspection Form complete?
6. Two (2) sets of the plans each of the following: YES NO N /A
a. Floor plans (s)? G
b. Foundation plan?
I c. Cross sections (s)? / I
d. Elevations?
e. Window and door schedule?
_ .....-----......_---_.. ...._..._...__._____
g. Plans signed and sealed by registered architect or
engineer?
h. Window and door schedule?
Two (2) site plans showing location of the structure to be
7. 3 built, location of well or water lines, location of septic
system or sewer line?
8. Setbacks from property lines to new structure? — —'
i
- -� .................
_..--.-.}--...-._..._..-..._}.....__........__ .__._..j
8 Setbacks to neighboring wells and septic systems,
including onsite well and septic systems (if applicable)? '
l 9. Driveway Permit? '
Town of Queensbury• Community Development Offca? • 742 Bay Road, Queensbury, NY 12804
�...............f__..._.__ _...,, OFFICE USE ONLY
TAX MAP / —NO. PERMIT No. 42P 0
/
FEES: PERMIT �_?�()pRECREATION ENGINEERING :
(If applicable) 01
,-„__.
PRINCIPAL STRUCTURE:
APPLICATION FOR ZONING APPROVAL & BUILDING PERMIT
A PERMIT MUST BE OBTAINED BEFORE BEGINNING CONSTRUCTION. APPLICATION IS SUBJECT TO
REVIEW BEFORE ISSUANCE OF A VALID PERMIT FOR CONSTRUCTION.
( t /
APPLICANT/BUILDER: l f 41 A l< R -cu• �a°� ^� OWNER: l 1-{C i`i� I-�•i '� )'(� •hSc�
ADDRESS: / ?�•'l� 'r1 �'•~� ADDRESS: rn c•.a ��•�2 l,�'`.^�_
PHONE NOS. 7 PHONE NOS. B� ?� b 0''-
CONTACT PERSON FOR BUILDING &CODES COMPLIANCE: r�C �� - LOVHONE(571) 71r j e
LOCATION OF PROPERTY:
SUBDIVISION NAME: yf j-A
PLEASE INDICATE MEASUREMENTS AS REQUIRED BELOW:
CHECK ALL THAT p it d W LL
APPLY TO YOUR Z 1= O
PROJECT O p . O H O = _
W C1 J LLCM NON O � 0u- = tS
Z AQ Q 0
SINGLE FAMILY
TWO-FAMILY !!
MULTI-FAMILY
(NO.of UNITS )
TOWNHOUSE
BUSINESS OFFICE
RETAIL-
MERCANTILE
FACTORY OR
INDUSTRIAL
ATTACHED
GARAGE(1,2,3)
OTHER
IF COMMERCIAL OR INDUSTRIAL-NAME OF BUSINESS:
ESTIMATED CONSTRUCTION COST+ FUEL TYPE: i `�
HEAT TYPE: �c;'��-L
ikcf" *HOW MANY FIREPLACE(S):_ —CX, AND/OR WOODSTOVES(S):
ZONING CATEGORY: F - PARE THERE WETLANDS ON THIS SITE? G
IS THIS A HISTORIC SITE?
PROPOSED USE OF BUILDING OR
ADDITION:
*Please complete a separate Application for"Fuel Burning Appliances&Chimneys" vailable in our office B 3-LGL t 1-05
Town of Queensbury • Community Development Office • 742 Bay Road, QueensburV, NY 12804
ARE THERE STRUCTURES NOT SHOWN ON PLOT PLAN? I
ARE THERE EASEMENTS ON PROPERTY? y
I acknowledge no construction activities shall be commenced prior to issuance of a valid
permit. I certify that the application, plans, and supporting materials are a true and
complete statement/description of the work proposed, that all work will be performed in
accordance with the NY State Building Codes, local building laws and ordinances, and in
conformance with local zoning regulations. I acknowledge that prior to occupying the
facilities proposed, I or my agents will obtain a certificate of occupancy. I also understand
that I/we are required to provide an as-built survey by a licensed land surveyor of all newly
constructed facilities prior to issuance of a certificate of occupancy.
I have read and agree to the above.
Signed
0 (Z—
Director of Building & Codes: 761-8256 (for questions regarding Building Permits, construction
codes or septic systems)
Zoning Administrator: 761-8218 (for questions regarding required permits, the permit process,
application requirements or to schedule an appointment)
...................................................; .,...._.............................................0
1 ,
1 1 ,
1 ,
Permission is hereby granted to the above ; This application / proposed action described
01
Applicant to erect or alter the building ; herein is found to be in accordance with the
described herein in accordance with said ; zoning Laws of the Town of Queensbury. 10
11
Application: ;
1 1 1 1
1 1 / 1
1 1 1 1
1 + 1 1 1
1 1 1 1
1 1 1 1
1 1 1 1
1
1 t J 1 1 1
1 / 1 1
1 lJ 1 1
1
1
1 j LL 1 1
BUILD/I CODES A; OVAL ZONING APPROVAL
£' .�, 1 1 ,
1 , 1
1 1
DA E DATE
1
1 1 1 1
1
QUESTIONS? CALL 761-8256 OR EMAIL
codes0gueensbury.net
Office Use Only VISIT OUR WESSITE FOR MORE INFORMATION
rv.
Operating Permit Issued: Yes No www.aueensbu net
Occupancy Type:
Construction Classification:
Assembly Occupancy Limit:
Special Conditions:
QW Town of Queensburyj - Community Development Office - 742 Bay Road, Queensbuny, NY 12804
Queensbu Building & Code Enforcement -Residential Final Inspection
ry gp
Offic\N (518)761-8256 Arrive: am/pm Depart:�,\
Date Inspection request received: Inspector's Initials:
NAME: / SD PERMIT#: _ ZZ (1:22
LOCATION: DATE: f
nx—
TYPE OF STRUCTURE:
Comments"
Yes No wa J
4" Building Number Address visible from road kzlSle, 011—/
Chimney He" /"B"Vent/Direct Vent Location J1
Fresh Air Intake �--
3 inch Plumbing Vent through roof minimum 6 inches
Roof Complete/Exterior Finish Completeyd V�r� h ���� � j
Platform at all exterior doors / /
Handrail 4 or more risers
Guards at stairs,decks,patios more than 30 inches above grade
Guard at stairwell at 34 inches or more
Guard at deck,porches 36 inches or more
Handrail Temhination at Newell Post or Wall
Interior/Exterior Railings 34 inches to 38 inches
Deck Brae /Handicapped Ramp Compliant
Grade away from foundation 6 inches with 10 feet
6 inch clearance to sill oft
Gas Valve shut-of e I regulator 18 indhes move grade
Interior privacy/trim/doors/main enhance 36 inches
Bathroom/Kocher watertight
Safety glazing/Window in stairwells safety glazingf
Interior Smoke Detectors/Carbon Monoxide Detectors
Every level: Every Bedroom:
Outside every bedroom area:
Inter Connected: Battery backup:
Attic access 30 inches x 22 Inches x 30 inches(height)in accessible area
Crawl Spaces 18 inch x 24 inch access, 1 sq.ft.-150 sq.ft.vents
Bathroom Fans tf no window
Plumbing fixtures
Foundation insulation
Floor truss,draft stopping finished basement 1,000 sq.ft.
Emergency egress below grade
Gas Furnace shut-off within 30 feet or within One of site
Oil Furnace shut-off at entrance to furnace area
Fumace/Hot Water Heater operaft
Low water shut-off border
Relief Va s installed/Heat Trapt Water Temp 110
Enclosed Stairs Sheetrock Underside minimum W Gypsum
Basement stairs dosed rise>4 inches
Garage Floor Pltdhed
Garage#Woofing/%hour fire door/door closer
Duct work Seated properly
Gas Logs in Sealed or Glass Enclosure
Final Electrical
Final Survey Plot Plan
Arc Fault Breaker in Bedrooms
Flex Gas fte Bonding
As Built Septic System/Sewer Dept.Inspection Sticker
Site Plan /Variance required
Flood Plain Certification,if required
Okay to issue C/C or C 10 Temporary/Pint
LABuilding&Codes FormslBudding&Codes\lnspedion FonnslResidentiat Final inspection Form revised_100405.doc;Revised
January 7,2008
Rough Plumbing / Insulation Inspection Report
Office No. (518) 761-8256 Date Inspection request received:
Queensbury Building & Code Enforcement Arrive: am/pm Depart: I,.' ' am/pm
742 Bay Road, Queensbury, NY 12804 Inspector's Initials: 47
NAME: t PERMIT #: CS
LOCATION: YN( INSPECT ON:
TYPE OF STRUCTURE:
Y N NIA
Rough Plumbing /Nail Plates
Plumbing Vent/Vents in Place
1 Y2 inch minimum Drain Size
Washing Machine Drain 2 inch minimum
Cleanout every 100 feet/change of direction
Pressure Test
Drain/Vent
Air/Head
5 P.S.I. or 10 ft. above highest connection for 15 minutes
Pressure Test
Water Supply Piping
Air/Head
50 P.S.1 for 15 minutes
Insulation/Residential Check/Commercial Check
Tyvek or Similar Exterior Sealant
Proper Vent, Attic Vent
Door/Window Sealed No Insulation
Duct/Hot Water Piping Insulation
If required unheated spaces
Combustion Air Supply for Furnace
M
sealed propeN/No duct tape
COMMENTS: 3
( �'�
Rough Plumbing Insulation Report.revised Nov 17 2003, revised February 15,2005, revised January 7,2008
Framing / Firestopping Inspection Report
Office No. (518) 761-8256 Date Inspection request received:
Queensbury Building&Code Enforcement Arrive: am/pm Depart: am/pm
742 Bay Road,Queensbury,NY 12804 Inspector's Initials: L.'
NAME: -- I., PERMIT#: �d'
LOCATION: INSPECT ON: -
TYPE OF STRUCTURE:
Y N N/A COMMENTS
Framing
cess 22"x 30"minimum
Jack Studs/Headers U
Bracing/Bridging
Joist hangers
Jack Posts/Main Beams
Exterior sheeting nailed properly
12"O.C.
Headroom 6 ft. 8 in.
Stairwells 36 in. or more
Headroom 6 ft. 8 in.
Notches/Holes/Bearing Walls
Metal Strapping for Notches Top Plate
1 `/s w 16 gauge 8 16D nails each side
Draft stopping 1,000 sq. ft. floor trusses
Anchor Bolts 6 ft. or less on center
Ice and water shield 24 inches from wall
Fire separation 1, 2, 3 hour
Fire wall 2, 3,4 hour
Firestopping
Penetration sealed
16 inch insulation in cavity min.
Garage Fire Separation
House side '/s inch or 5/8 inch Type X
Garage side 5/8 inch Type X
Ceiling/wall
Windows Habitable Space/Bedrooms /` C—T—rz-y
24 in. (H) A /
20 in. (W)
V
5.7 sf above/below grade
5.0 sf grade
T-,hr-) Wv fir-lf.
Rough Plumbing / Insulation I spection Report
Office No. (518) 761-8256 Date Inspection request received:
Queensbury Building & Code Enforcement Arrive: am/pm Depart: am/pm
742 Bay Road, Queensbury, NY 12804 Inspector's Initials: 11
1
NAME: PERMIT #:
LOCATION: INSPECT ON: r
TYPE OF STRUCTURE:
Y N N/A
Rough Plumbing it Plates
Plumbing Ven ents in Place
1 2 i minimum Drain Size
Washing Machine Drain 2 inch minimum
Cleanout every 100 feet change of direction
Pressure Test
Drain / Vent
Air / Head
5 P.S.I. or 10 ft. above highest connection for 15 minutes
Pressure Test _
Water Supply Piping
Air / Head
50 P.S.I for 15 minutes
Insulation Residential Check Commercial Check
Proper Vent Attic Vent
Duct / Hot Water Piping Insulation
If required unheated spaces
Combustion Air Supply for Furnace
Duct work sealed properly / No duct tape
COMMENTS:
LAPam Whitinouilding&Codes\lnspection Forms\Rough Plumbing Insulation Report.revised Nov 17 2003.doc Revised February 15,2005
Foundation Inspection Report
Office No.(518)761-8256 Date Inspection request received:
Queensbury Building&Code Enforcement Arrive: am/pm Depart�i� pm
742 Bay Rd.,Queensbury,NY 12804 Inspector's Initials:
NAME: PERMIT#:
LOCATION: i ! t ON ! _ INSPECT ON: 29
TYPE OF STRUCTURE: ' .--
Comments
Y N N/A
F ings
Piers i `
Monolithic Slab
Reinforcement in Place
The contractor is responsible for
providing protection from freezing
for 48 hours following the placement
of the concrete.
Materials for this purpose on site.
Foundation/Wallpour
Reinforcement in Place
Footing Dowels or Keyway in place
Foundation Dampproofmg
Foundation Waterproofing
Footing Drain Daylight or Sump
Footing Drain Stone:
12 inch width
6 inches above footing
6 mil poly for wet areas under slab
Backfill Approval
Plumbing Under Slab
PVC/Cast/Copper
Foundation Insulation Interior/Exterior
R-
Rough Grade 6 inch drop within 10 ft.
L:\Building&Codes Forms\Building&Codes\Inspection Forms\Foundation Inspection Report.doc
Last printed 12/20/2005 9:24:00 AM
1 V -/( an-
Framing / Firestopping Inspection Report
Office No. (518) 761-8256 Date T.ns ection request received: I 3
Queensbury Building&Code Enforcement Arriw;: C. am/pm, Depart: am/pm
742 Bay Road, Queensbury,NY 12804 Inspector's Initials:
1
NAME: >°� '� �14� ( �,.Jt t Sc+ PERMIT#: ��- 7�
LOCATION: P tin i , INSPECT ON:
TYPE OF STRUCTURE: o,�
Framing Y N N/A COMMENTS
Attic Access 22"x 30"minimum
Jack Studs/Headers
Bracing/Bridging
Joist hangers
Jack Posts/Main Beams
Exterior sheeting nailed properly ;
12"O.C.
Headroom 6 ft. 8 in.
Stairwells 36 in. or more
Headroom 6 ft. 8 in.
I
Notches/Holes/Bearing Walls
Metal Strapping for Notches Top Plate {
1 '/z w) 16 gauge 8 16D nails each side
Draft stopping 1,000 sq. ft. floor trusses
Anchor Bolts 6 ft.or less on center r
r
e an wat r s ie inches from wall
Fire separation 1, 2, 3 hour
Fire wall 2, 3,4 hour
Firestopping
Penetration sealed
16 inch insulation in cavity min.
Garage Fire Separation
House side'/z inch or 5/8 inch Type X
Garage side 5/8 inch Type X
Ceiling/wall
Windows Habitable Space/Bedrooms
24 in. (H)
20 in. (W)
5.7 sf above/below grade
5.0 sf grade
Permit#
Pe 't Dat
REScheck Software Version 3.7 Release 1 b
Compliance Certificate
Project Title: Wilkinson Residence Renovations
Report Date:11/15/07 k
Energy Code: New York State Energy Conservation
Construction Code
Location: Warren County,New York
Construction Type: Detached 1 or 2 Family
Heating Type: Non-Electric
Glazing Area Percentage: 5%
Heating Degree Days: 7635
Construction Site: Owner/Agent: Designer/Contractor:
1 Pinon Pine
Queensbury,NY 12804
Permit Date:11/07
Compliance: . . ..-
Cavity
R-Value •..
Ceiling 1:Flat Ceiling or Scissor Truss: 484 38.0 0.0 15
Wall 1:Wood Frame,16"o.c.: 528 21.0 0.0 27
Window 1:Wood Frame:Double Pane with Low-E: 29 0.310 9
Door 1:Solid: 20 0.086 2
Floor 1:All-Wood Joist/Truss:Over Unconditioned Space: - 484 38.0 0.0 13
Statement of Compliance:The proposed building represented in this document is consistent with the building plans,specifications,
and other calculations submitted with this permit application.The proposed systems have been designed to meet the New York
State Energy Conservation Construction Code requirements.When a Registered Design Professional has stamped and signed this
page,they are attesting that to the best of his/her knowledge,belief,and professional judgment,such plans or specifications are in
compliance with this Code.
t I�ad C- Jd�r� A-4oc . tl I� 01
wilder/Designer Company Name Date
Wilkinson Residence Renovations Page 1 of 4
REScheck Software Version 3.7 Release 1 b
Inspection Checklist
Date: 11/15/07
Ceilings:
❑ Ceiling 1:Flat Ceiling or Scissor Truss,R-38.0 cavity insulation
Comments:
Above-Grade Walls:
❑ Wall 1:Wood Frame,16"o.c.,R-21.0 cavity insulation
Comments:
Windows:
❑ Window 1:Wood Frame:Double Pane with Low-E,U-factor:0.310
For windows without labeled U-factors,describe features:
#Panes Frame Type Thermal Break? Yes No
Comments:
Doors:
❑ Door 1:Solid,U-factor.0.086
Comments:
Floors:
❑ Floor 1:All-Wood Joist/Truss:Over Unconditioned Space,R-38.0 cavity insulation
Comments:
Air Leakage:
❑ Joints,penetrations,and all other such openings in the building envelope that are sources of air leakage must be sealed.
❑ Recessed lights must be 1)Type IC rated,or 2)installed inside an appropriate air-tight assembly with a 0.5"clearance from
combustible materials.If non-IC rated,the fixture must be installed with a 3"clearance from insulation.
Vapor Retarder:
❑ Required on the warm-in-winter side of all non-vented framed ceilings,walls,and floors.
Materials Identification:
❑ Materials and equipment must be installed in accordance with the manufacturer's installation instructions.
❑ Materials and equipment must be identified so that compliance can be determined.
❑ Manufacturer manuals for all installed heating and cooling equipment and service water heating equipment must be provided.
❑ Insulation R-values and glazing U-factors must be clearly marked on the building plans or specifications.
Duct Insulation:
❑ Supply ducts in unconditioned attics or outside the building must be insulated to R-11.
❑ Return ducts in unconditioned attics or outside the building must be insulated to R-6.
❑ Supply ducts in unconditioned spaces must be insulated to R-11.
❑ Return ducts in unconditioned spaces(except basements)must be insulated to R-
❑ Return ducts in unconditioned spaces(except basements)must be insulated to R-2.
.Insulation is not required on return ducts in basements.
Duct Construction:
❑ All joints,seams,and connections must be securely fastened with welds,gaskets,mastics(adhesives),
mastic-plus-embedded-fabric,or tapes.Tapes and mastics must be rated UL 181A or UL 181 B.
Wilkinson Residence Renovations Page 2 of 4
Exception:Continuously welded and locking-type longitudinal joints and seams on ducts operating at less than 2 in.w.g.(500
Pa).
❑ The HVAC system must provide a means for balancing air and water systems.
Temperature Controls:
❑ Each dwelling unit has at lesat one thermostat capable of automatically adjusting the space temperature set point of the largest
zone.
Electric Systems:
❑ Separate electric meters are required for each dwelling unit.
Fireplaces:
❑ Fireplaces must be installed with tight fitting non-combustible fireplace doors.
❑ Fireplaces must be provided with a source of combustion air,as required by the Fireplace construction provisions of the Building
Code of New York State,the Residential Code of New York State or the New York City Building Code,as applicable.
Service Water Heating:
❑ Water heaters with vertical pipe risers must have a heat trap on both the inlet and outlet unless the water heater has an integral
heat trap or is part of a circulating system.
❑ Insulate circulating hot water pipes to the levels in Table 1.
Circulating Hot Water Systems:
❑ Insulate circulating hot water pipes to the levels in Table 1.
Swimming Pools:
❑ All heated swimming pools must have an on/off heater switch and require a cover unless over 20%of the heating energy is from
non-depletable sources.Pool pumps require a time clock.
Heating and Cooling Piping Insulation:
❑ HVAC piping conveying fluids above 105 degrees F or chilled fluids below 55 degrees F must be insulated to the levels in Table
2.
Wilkinson Residence Renovations Page 3 of 4
F
Table 1:Minimum Insulation Thickness for Circulating Hot Water Pipes
Insulation Thickness in Inches by Pipe Sizes
Heated Water Non-Circulating Runouts Circulating Mains and Runouts
Temperature(°F) Up to V Up to 1.25" 1.5"to 2.0" Over 2"
170-180 0.5 1.0 1.5 2.0
140-169 0.5 0.5 1.0 1.5
100-139 0.5 0.5 0.5 1.0
Table 2:Minimum Insulation Thickness for HVAC Pipes
Fluid Temp. Insulation Thickness in Inches by Pipe Sizes
Piping System Types Rangeff) 2"Runouts 1"and Less 1.25"to 2.0" 2.5"to 4"
Heating Systems
Low Pressure/Temperature 201-250 1.0 1.5 1.5 2.0
Low Temperature 120-200 0.5 1.0 1.0 1.5
Steam Condensate(for feed water) Any 1.0 1.0 1.5 2.0
Cooling Systems
Chilled Water,Refrigerant and 40-55 0.5 0.5 0.75 1.0
Brine Below 40 1.0 1.0 1.5 1.5
NOTES TO FIELD:(Building Department Use Only)
Page 4 of 4
Wilkinson Residence Renovations