Updated Page 4 for Site Plan Application4
Site Plan Review application – Revised October 2016
Town of Queensbury Planning Office-742 Bay Road, Queensbury, NY 12804
Additional Project Information
1. Will the proposal require a Septic Variance from the Town Board of Health? _______________
2. If the parcel has previous approvals, list application number(s): _________________________
3. Does this project require coverage under the New York State Pollutant Discharge Elimination System
(SPDES) Permit Program ? _______________
4. Estimated project duration: Start Date __________ End Date __________
5. Estimated total cost of project: _______________
6. Total area of land disturbance for project: _______________
Floor Area Ratio Worksheet
FLOOR AREA RATIO (FAR) -- The relationship of building size to lot size, derived by dividing the total
building floor area by the lot size in square feet, yielding a percentage.
Zoning District
Symbol Floor Area Ratio [FAR]
Waterfront Residential WR 0.22
Commercial Moderate/ Intensive
CM/ CI 0.3
A. The combined area of all square footage, as measure from exterior walls of all structures on the property,
including all floors of the structures, garages, basements and attics with more than five (5) feet of ceiling
height and covered porches. Building square footage does not include: Open deck, docks and that portion of
covered docks extending over water and one storage shed of one hundred twenty (120) square feet or less.
Any additional sheds will be included. (See “FLOOR AREA RATIO”).
B. Commercial or industrial: the total area in square feet as measured from the exterior of the outside walls of a
building or structure, and when applicable, the sum total of all floor areas of the principal and accessory
buildings or structures on the project site.
A. Parcel Area ___________________________ sq. ft.
B. Existing Floor Area ___________________________ sq. ft. [see above definition]
C. Proposed Additional Floor Area ___________________________ sq. ft.
D. Proposed Total Floor Area ___________________________ sq. ft.
E. Total Allowable Floor Area ___________________________ (Area x _____) [see above table]
*If D is larger than E. a variance or revisions to your plan may be needed. Consult with Staff.