CC-0663-2021 f N
Office Use Only
ADDITION/ALTERATION PERMIT Permit#: �.—Q 1021
APPLICATION Permit Fee:$
Town ofQueensbury
742 Bay Road,Queensbury,NY 12804 Invoice,#:
P:518-761-8256 www.gueensbury.net
Flood Zone? Y N eviewed
Project Location: �}�� QWALW
- Tax Map ID#: Subdivision N
SEP 09
PROJECT INFORMATION:
TOWN OF QUEEN 13S URy
/
TYPE: Residential y Commercial, Proposed Use:BUILDING&CODES
_Single-Family —Two-Family Multi-Family(#of units ) _Townhouse
Business Office 'v Retail _Industrial/Warehouse _Garage (#of cars_)
Other(describe )
ADDITION SQUARE FOOTAGE: ALTERATION SQUARE FOOTAGE:
1st floor: 1st floor:
2nd floor: 2nd floor:
3rd floor: 3rd floor:
Basement(habitable space): Basement (habitable space):
Total sq ft: Total sq ft:
Scope of work to be done:
Addition/Alteration Application Revised January 2021
1. Estimated Cost ofCnn of-Construction: � i���>^ '»�)
�
l'�` . '
'
Z. Source of Heat k�ndeonp\: —Oil Propane Solar Other
Fireplaces/inserts need a separate Fuel Burning AmplIa'bce5 - p{icatio8
� �
3. Are there any structures not shown on the plot plan? YES ��'�"O Explain:
-x/
4. Are there any easennentuon the property? YES _�_NO
----
SITE INFORMATION:
* |s this a corner lot? /YE� NO
---' ---- �/
* VVi||the grade be changed aaaresu�of the con�Tud �~/ .ion? YEG _� O
w What is the water source? V� PUBLIC PRIVATE WELL
� �`
w What type ofxvostaxvatersystern is on the parcel? SEWER _ ��rn|VATE SEPTIC
l. | acknowledge that no construction shall becommenced prior to the issuance ofa valid permit and will be
completed within a 12 month period.Any changes to the approved plans prior to/during construction will require
the submittal of amended plans, additional reviews and re-approva|.
2. If,for any reason,the building permit application is withdrawn, 30%of the fee is retained by the Town of
Queensbury.After 1 year from the initial application date, 100%of the fee is retained.
3. |fthevxork is not completed by the 1 year expiration date the permit may be renewed, subject to fees
and department approval.
4. |certify that the application, plans and supporting materials are a true and a complete statement and/or description
of the work proposed,that all work will beperformed in accordance with the NYS Building Codes, local building laws
and ordinances, and in conformance with local zoning regulations.
5. | acknowledge that prior to occupying the facilities proposed 1, or my agents, will obtain a certificate of
occupancy.
0. 1 also understand that[/we are required to provide an as-built survey by a licensed land surveyor of all newly
constructed facilities prior to issuance ofa certificate ofoccupancy.
| have read and agree to the above:
PRINT NAME:
SIGNATURE: \ DATE: «
CONTACT INFORMATION: PLEASE PRINT LEGIBLY OR TYPE, PLEASE INCLUDE AN EMAIL
• Applicant:
Name(s): ��riru
Mailing Address, C/S/i Z oZ S P- 9 -'!apez , Ny .. f•Z-0zc)
Cell Phone: f S 1� ) - 2$ 2 Land Line: �)
Email: oPC • Csrrr�
• Primary O..iw�ner(s):
Name(s):
Mailing Address, C/S/Z: i�O (zofc 435 S vcs gmc7 "4y
Cell Phone: G9R- Land Line: �)
Email: `Fri 1`C Si-e ac-$-s5 hoP5 - eo w
2 Check if all work will be performed by property owner only
• Contractor(s): List all additional contractors on the back of this form)
ContactName(s): SY\0f5- C�OCP ,
Contractor Trade:
Mailing Address, C/S/Z: I �?� 43� `J�x'csc- 9 � Q s.- ��� 1iL �
Cell Phone:_( 5-(91 ) GPI 8 2-15-1y Z- Land Line: ( 5(& ) �i�I PLO 1 �G LK2-
Email: -Tnopi-F? 154-�C�C&f}s5UP5, Cc7Vw-
"Workers" Comp documentation must be submitted with this application"
Arch itect(s)/Engineer(s):
Business Name:
Contact Name(s):.
Mailing Address, C/S/Z:
Cell Phone: Land Line: � )
Email:
Contact Person for Compliance in regards to this project: Vkl
Cell Phone: Land Line:
Email: t
Addition/Alteration Application Revised January 2021
FIRE MARSHAL'S OFFICE
Tozvn of Queensbunj
742 Bay Road, Queensbury, NY 12804
"Home of Natural Beauty ... A Good Place to Live "
PLAN REVIEW
Stewart's Co
777 Quaker Road
CC-0663-2021
9/10/2021
744sf addition
The following comments are based on review of drawings:
• Verify fire extinguisher location and inspection
• Verify operation of exit/Emergency lighting.
• Lock/ latches shall comply with Chapter 10 of 2015 IBC.
• Verify Truss ID signage
• Need NFPA 72 letter of compliance for fire alarm modifications
Michael J Palmer .
Fire Marshal
742 Bay Road
Queensbury NY 12804
firemarshal@queensbury.net
Fire Marshal 's Office - Phone: 518-761-8206 - Fax: 518-745-4437
flrenzarshal@queensbunt.net - zvzazv.queensbury.net
COMcheck Software Version 4.1.5.3
Envelope Compliance Certificate
Project Information D E
Energy Code: 2020 NYStretch Energy Code-2018 IECC Project Title: Shop 417 Quaker Road SEP 15 2021
Location: Glens Falls, New York
Climate zone: 6a TOWN OF QUEENSBURY
Project Type: Addition BUILDING&CODES
Vertical Glazing/Wall Area: 3%
Construction Site: Owner/Agent: Designer/Contractor:
777 Quaker road Terry Root Stewarts shops corp
Queensbury, NY 12804 Stewarts shops corp
PO. Box 435
Saratoga Springs, NY 12866 REVIEWED FOR
518-698-2562 ENERGY CODE COMPLIANCE
Troot@stewartsshops.com
Building Area Floor.Area
1-Retail: Nonresidential 744
Envelope Assemblies
Assembly Gross Area .Cavity Cont. Proposed Budget U-
or R-Value R-Value U-Factor Factor(a)
Perimeter .
Roof 1:Attic Roof with Wood Joists,[Bldg.Use 1-Retail] 744 49.0 0.0 0.021 0.019
Floor 1:Slab-On-Grade:Unheated,Vertical 4 ft.,[Bldg.Use 1- 86 — 10.0 0.480 0.520
Retail](b)
EAST
Exterior Wall 1:Wood-Framed,16"o.c.,[Bldg.Use 1 -Retail] 774 21.0 6.0 0.043 0.048
Door 1:Insulated Metal,Swinging,[Bldg.Use 1 -Retail] 21 -- -- 0.370 0.370
(a)Budget U-factors are used for software baseline calculations ONLY,and are not code requirements.
(b)Slab-On-Grade proposed and budget U-factors shown in table are F-factors.
Project Notes
Envelope
Envelope Compliance Statement
Compliance Statement: The proposed envelope design represented in this document is consistent with the building plans,
specifications,and other calculations submitted with this permit application.The proposed envelope systems have been
designed to meet the 2020 NYStretch Energy Code-2018 IECC requirements in COMcheck Version 4.1.5.3 and to comply with
any applicable man atory requirements listed in the Inspection Qa4list.
LEV
Name-Title Signature Date
744 square feet additipon to the rear of the existing building
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 1 of 18
COMcheck Software Version 4.1.5.3
Interior Lighting Compliance Certificate
Project Information
Energy Code:. 2020 NYStretch Energy Code-2018 IECC
Project Title: Shop 417 Quaker Road
Project Type: Addition
Construction Site: Owner/Agent: Designer/Contractor:
777 Quaker road Terry Root Stewarts shops corp
Queensbury, NY 12804 Stewarts shops corp
PO.Box 435
Saratoga Springs, NY 12866
518-698-2562
Troot@stewartsshops.com
Al lowed'(nterior`Lighti;rig;power
f+ °f 1J�'..1;;!• /-.}\ .,..'�s,'(yam s)> B C D
AreaCateg9ry Floor Area Allowed Allowed Watts
(ft2) Watts/ft2 (B X C)
1-Common Space Types:Sales Area 100 1.06 106
2-Retail:Sales Area 50 1.06 53
Total Allowed Watts= 159
Proposed Interior Lighting Power
A B C D E
Fixture ID: Description/Lamp/Wattage Per Lamp/Ballast Lamps/ #of Fixture (C X D)
Fixture Fixtures Watt.
1-Common Space Types:Sales Area
LED 1:LED Panel40W: 1 3 40 120
2-Retail:Sales Area
Total Proposed Watts= 120
Interior • • • better than code
Interior Lighting Compliance Statement
Compliance Statement. The proposed interior lighting design represented in this document is consistent with the building plans,
specifications, and other calculations submitted with this permit application.The proposed interior lighting systems have been
designed to meet the 2020 NYStretch Energy Code-_2018 IECC requirements in COMcheck Version 4.1.5.3 and to comply with
any a plicable mand tory requirements listed in the Inspection C Tis t.
Name-Title Signature Date
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 2 of 18
COMcheck Software Version 4.1.5.3
Mechanical Compliance Certificate
Project Information
Energy Code: 2020 NYStretch Energy Code-2018 IECC
Project Title: Shop 417 Quaker Road
Location: Glens Falls, New York
Climate Zone: 6a
Project Type: Addition
Construction Site: Owner/Agent: Designer/Contractor:
777 Quaker road Terry Root Stewarts shops corp
Queensbury, NY 12804 Stewarts shops corp
PO.Box 435
Saratoga Springs, NY 12866
518-698-2562
Troot@stewartsshops.com
Mechanical Systems List
Quantity System Type&Description
1 HVAC System 1 (Single Zone):
Heating:1 each-Central Furnace,Electric,Capacity=4 kBtu/h
No minimum efficiency requirement applies
Fan System: None
1 Water Heater 1:
Electric Storage Water Heater,Capacity:0 gallons
Proposed Efficiency:0.95 SL,%/h(if>12 kW),Required Efficiency:1.00 SL,%/h(if>12 kW)
Mechanical Compliance Statement
compliance Statement. The proposed mechanical design represented in this document is consistent with the building plans,
specifications, and other calculations submitted with this permit application.The proposed mechanical systems have been
designed to meet the 2020 NYStretch Energy Code-2018 IECC requirements in COMcheck Version 4.1.5.3 and to comply with
any applicable mandatory requirements list the Inspectio cklist.
SST Y-) 0i J
Name-Title Signature Date
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 4 of 18
COMcheck Software Version 4.1.5.3
Exterior Lighting Compliance Certificate
.8/1
Project Information
Energy Code: 2020 NYStretch Energy Code-2018 IECC
Project Title: Shop 417 Quaker Road
Project Type: Addition
Exterior Lighting Zone 2(Light industrial area with limited nighttime use(LZ2))
Construction Site: Owner/Agent: Designer/Contractor:
777 Quaker road Terry Root Stewarts shops corp
Queensbury, NY 12804 Stewarts shops corp
PO. Box 435
Saratoga Springs, NY 12866
518-698-2562
Troot@stewartsshops.com
Allowed Exterior Lighting Power
A B C D E
Area/Surface Category Quantity Allowed Tradable Allowed Watts
Watts/Unit Wattage (B X C)
Driveway 2 ft2 0.04 Yes 0
Total Tradable Watts(a)= 0
Total Allowed Watts= 0
Total Allowed Supplemental Watts(b)= 400
(a)Wattage tradeoffs are only allowed between tradable areas/surfaces.
(b)A supplemental allowance equal to 400 watts may be applied toward compliance of both non-tradable and tradable areas/surfaces.
Proposed Exterior Lighting Power
A B C D E
Fixture ID : Description/Lamp/Wattage Per Lamp/Ballast Lamps/ #of Fixture (C X D)
Fixture Fixtures Watt.
Driveway(2 ft2):Tradable Wattage
LED 2:LED Other Fixture Unit 40W: 1 2 40 80
Total Tradable'Proposed Watts= 80
Exterior Lighting PASSES: Design : 1' better than code
Exterior Lighting Compliance Statement
Compliance Statement: The proposed exterior lighting design represented in this document is consistent with the building plans,
specifications, and other calculations submitted with this permit application.The proposed exterior lighting systems have been
designed to meet the 2020 NYStretch Energy Code-2018 IECC requirements in COMcheck Version 4.1.5.3 and to comply with
any applicable mandatory requirements listed in the Inspection Ct5tklist.
Z�Cllr_ 4.)TG'4
Name-Title Signature Date
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 3 of 18
COMcheck Software Version 4.1.5.3
Inspection Checklist
Energy Code: 2020, NYStretch Energy Code - 2018 IECC
Requirements: 100.0% were addressed directly in the COMclieck software
Text in the "Comments/Assumptions" column is provided by the user in the COMcheck Requirements screen. For each
requirement, the user certifies that a code requirement will be met and how that is documented, or that an exception
is being claimed. Where compliance is itemized in a separate table, a reference to that table is provided.
Section
# Plan Review Complies? Comments/Assumptions
&Req.ID
C103.2 :Plans and/or specifications provide all ;❑Complies :Requirement will be met.
[PR111 !information with which compliance :❑Does Not
;can be determined for the building ❑Not Observable
;envelope and document where
!exceptions to the standard are ;❑Not Applicable
;claimed.
C103.2 ;Plans,specifications, and/or ;❑Complies ;Requirement will be met.
[PR2]1 calculations provide all information :❑Does Not
;with which compliance can be
:.determined for the mechanical :❑Not Observable
:systems and equipment and ;❑Not Applicable
;document where exceptions to the
;standard are claimed. Load ;
:calculations per acceptable
;engineering standards and
;handbooks.
C103.2 ;Plans,specifications,and/or ;❑Complies Requirement will be met.
[PR3]1 calculations provide all information ❑Does Not
;with which compliance can be
determined for the service water I❑Not Observable
:heating systems and equipment and ;❑Not Applicable
;document where exceptions to the
;standard are claimed. Hot water
system sized per manufacturer's :
sizing guide.
C103.2 ;,Plans,specifications, and/or ;❑Complies ;Requirement will be met.
[PR411 ;calculations provide all information ❑Does Not
;with which compliance can be
:determined for the interior lighting :❑Not Observable
land electrical systems and equipment ❑Not Applicable
;and document where exceptions to
;the standard are claimed.Information ;
;provided should include interior
lighting power calculations,wattage of
;bulbs and ballasts,transformers and
control devices.
C103.2 :Plans,specifications,and/or :❑Complies :Requirement will be met.
[PR811 :calculations provide all information :❑Does Not
;with which compliance can be
determined for the exterior lighting j❑Not Observable
;and electrical systems and equipment I❑Not Applicable ;
;and document where exceptions to :
;the standard are claimed. Information
:provided should include exterior :
lighting power calculations,wattage of
bulbs and ballasts,transformers and
:control devices. :
C402.4.1 :The vertical fenestration area <=30 ❑Complies ;Requirement will be met.
[PR10]1 :percent of the gross above-grade wall :❑Does Not
;area. :
❑Not Observable;
;❑Not Applicable
11 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 corn check.cck Page 5 of 18
Section
#• Plan Review Complies? Comments/Assumptions
&Req.ID
C402.4.1 ;The skylight area <=3 percent of the ❑Complies Requirement will be met.
[PR11]1 ;gross roof area. ;❑Does Not
❑Not Observable;
❑Not Applicable
C406 ;Plans,specifications,and/or ;❑Complies Requirement will be met.
[PR9]1 calculations provide all information :❑Does Not
;with which compliance can be ❑Not Observable;Location on plans/spec:A-9
;determined for the additional energy
efficiency package options. ❑Not Applicable
C405.11 New parking garages and new parking;❑Complies :Exception:Requirement does not apply.
[PR38]3 I lots powered by the energy services T❑Does Not
for a building,and with 10 or greater
parking spaces, provide either: 1. .❑Not Observable I
Panel capacity and conduit for the ;❑Not Applicable
{future installation of minimum
208/240V 40-amp outlets for 5
percent of the total parking spaces
and not less than two parking spaces;
or 2.Minimum 208/240V 40-amp
outlets for 5 percent of the total
parking spaces and not less than two
parking spaces.
C402.1 PTAC/PTHP penetration through ;❑Complies Requirement will be met.
[PR17]1 thermal envelope-When penetrations:❑Does Not
;from mechanical equipment listed in ;
;Table C403.3.2(3)exceeds 1 percent ❑Not Observable
;of the opaque above-grade wall area, ;❑Not Applicable
;the penetration area is represented as
;an envelope wall assembly of similar
type having size equal to penetration
;area and proposed U-0.5.
Additional Comments/Assumptions:
1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 6 of 18
Section
# Footing/Foundation Inspection I Complies? Comments/Assumptions
& Req.ID
C303.2 J JSlab edge insulation installed per ;❑Complies :Requirement will be met.
[FO4]2 manufacturer's instructions. ❑Does Not
❑Not Observable;
❑Not Applicable
C303.2.1 ;,Exterior insulation protected against ;❑Complies Requirement will be met.
[FO6]1 damage,sunlight, moisture,wind, ❑Does Not
;landscaping and equipment
;maintenance activities. :❑Not Observable
❑Not Applicable
C105.2.1 Installed slab-on-grade insulation type ;❑Complies See the Envelope Assemblies table for values.
[F03]2 and R-value consistent with insulation :❑Does Not
!specifications reported in plans and
COMcheck reports. ,❑Not Observable
;❑Not Applicable 1.
C402.2.4 Slab edge insulation depth/length. ;❑Complies :Exception:Requirement does not apply.
[F07]2 Slab insulation extending away from :❑Does Not
building is covered by pavement or :See the Envelope Assemblies table for values.
>=10 inches of soil. ,❑Not Observable
j❑Not Applicable
C403.12.2Snow/ice melting system and freeze ;❑Complies ;Requirement will be met.
protection systems have sensors and. E❑Does Not
C403.12.3 controls configured to limit service for
[FO9]3 pavement temperature and outdoor I❑Not Observable
temperature.future connection to ;❑Not Applicable
controls.
Additional Comments/Assumptions:
1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Dbcuments\COMcheck\417 corn check.cck Page 7 of 18
Section
# Framing/Rough-in Inspection Complies? Comments/Assumptions,
& ReqJD1.' F
C303.1.3 Priestration products rated in ;❑Complies I Exception:Default values are used.
[FR12]z cordance with NFRC. :❑Does Not
❑Not Observable;
❑Not Applicable
C303.1.3 I Fenestration products are certified as ;❑Complies :Requirement will be met.
[FR13]1 .to performance labels or certificates :❑Does Not
;provided. :❑Not Observable
❑Not Applicable
C402.4.3 ;Vertical fenestration SHGC value. ;❑Complies ;See the Envelope Assemblies table for values.
[FR10]1 ❑Does Not
❑Not Observable;
❑Not Applicable
C402.4.3„Installedverticalfenestration.1-1-factor ;❑Complies ;See the Envelope Assemblies table for values.
C402.4.3. :and SHGC consistent with label :❑Does Not
4 ;specifications and as reported in plans ❑Not Observable;
[FR811 ;and COMcheckreports. ❑Not Applicable
I
C402.5.1 ;The building envelope contains a ❑Complies :Requirement will be met.
[FR16]1 ;continuous air barrier that is sealed in :❑Does Not
an approved manner and either ❑Not Observable
;constructed or tested in an approved
manner.Air barrier penetrations are ❑Not Applicable
;sealed in an approved manner.
C402.5.2, Factory-built fenestration and doors ;❑Complies ;.Requirement will be met.
C402.5.4 are labeled as meeting air leakage ❑Does Not
[FR18]3 #requirements. ;❑Not Observable
❑Not Applicable
C402.5.7 Vestibules are installed on all building ;❑Complies ;Exception:Requirement does not apply.
[FR17]3 entrances. Doors have self-closing :❑Does Not
;devices. ;❑Not Observable;
❑Not Applicable
Additional Comments/Assumptions:
11 High Impact(Tier 1) 2 1 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 8 of 18
Section
# Plumbing Rough-In Inspection Complies? Comments/Assumptions
& Req.ID
C404.5, ;Heated water supply piping conforms ;❑Complies ;Requirement will be met.
C404.5.1, }to pipe length and volume ❑Does Not
C404.5.2 Srequirements. Refer to section details.[PL6]3 ;❑Not Observable;
s
❑Not Applicable
C404.5, g Heated water supply piping conforms ;❑Complies ;Requirement will be met.
C404.5.1, to pipe length and volume ;❑Does Not
C404.5.2 €requirements. Refer to section details.
[PL6]3 ,❑Not Observable;
❑Not Applicable
C404.6.3 ;Pumps that circulate water between a ;❑Complies ;Exception:Requirement does not apply.
[PL7]3 heater and storage tank have controls :❑Does Not
that limit operation from startup to ❑Not Observable
cycle ;
minutes after end of heating :❑Not Applicable
C404.6.3 Pumps that circulate water between a ;❑Complies ;Exception:Requirement does not apply.
[PL7]3 heater and storage tank have controls :❑Does Not
that limit operation from startup to
<=5 minutes after end of heating ;❑Not Observable
cycle. ;❑Not Applicable ;
C404.7 I Demand recirculation water systems ;❑Complies ;Exception:Requirement does not apply.
[PL8]3 I have controls that start the pump :❑Does Not
upon receiving a signal from the
action of a user of a fixture or ;❑Not Observable
appliance and limits the temperature Z❑Not Applicable
of the water entering the cold-water
piping to 104°F.
C404.7 Demand recirculation water systems ;❑Complies ;Requirement will be met.
[PL8]3 j have controls that start the pump ❑Does Not
upon receiving a signal from the
action of a user of a fixture or :❑Not Observable
appliance and limits the temperature :❑Not Applicable
r of the water entering the cold-water
piping to 104°F.
Additional Comments/Assumptions:
1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 1 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 9 of 18
Fcr
Mechanical Rough-In Inspection Complies? Comments/Assumptions
iThermally ineffective panel surfaces of;❑Complies ;Exception:Requirement does not apply.
sensible heating panels have j❑Does Not
insulation>= R-3.5.
❑Not Observable;
I ;❑Not Applicable
C402.5.5 ;Stair and elevator shaft vents have ;❑Complies ;Exception:Requirement does not apply.
[ME3]3 motorized dampers that automatically ❑Does Not
close, Refernece section C403.7.7 for
operational details. ❑Not Observable;
❑Not Applicable
C403.7.7 Outdoor air and exhaust systems have;❑Complies ;Requirement will be met.
[ME58]3 }motorized dampers that automatically ❑Does Not
shut when not in use and meet
maximum leakage rates. Check ❑Not Observable;
gravity dampers where allowed. ❑Not Applicable
Reference section language for
operational details.
C403.8.1 HVAC fan systems at design ;❑Complies Requirement will be met.
[ME65]3 conditions do not exceed allowable :❑Does Not
i fan system motor nameplate hp or fan; See the Mechanical Systems list for values.
isystem bhp. ,❑Not Observable;
lj ;❑Not Applicable
C403.8.3 Fans have efficiency grade(FEG) >_ ;❑Complies ;Requirement will be met.
[ME117]2 67.The total efficiency of the fan at :❑Does Not
the design point of operation <= 15%
of maximum total efficiency of the ;7Not Observable
fan. ❑Not Applicable ;
C403.12.1 Systems that heat outside the building I❑Complies !Exception:Requirement does not apply.
[ME71]2 envelope are radiant heat systems E❑Does Not
controlled by an occupancy sensing
device or timer switch. UNot Observable
❑Not Applicable
C403.2.3 HVAC equipment efficiency verified. ;❑Complies ;See the Mechanical Systems list for values.
[ME55]2 ::.[:]Does Not
'❑Not Observable;
❑Not Applicable
C405.8.1. New traction elevators with a rise of ;❑Complies ;Exception: Requirement does not apply.
1 75 feet or more have a power :❑Does Not
[ME36]3 tconversion system that complies as ;
!follows: C405.8.1.1.1 Induction motors;❑Not Observable
with a Class IE2 efficiency ratings are :❑Not Applicable
be used. C405.8.1.1,2 Transmissions
does not reduce the efficiency of the
combined motor/transmission below ;
that shown for the Class IE2 motor for
elevators with capacities below 4,000 ;
lbs. C405.8.1.1.3 Potential energy
released during motion recovered with;
a regenerative drive that supplies ;
!electrical energy to the building
!electrical system.
C405.10 Commercial kitchen equipment shall ;❑Complies ;Exception:Requirement does not apply.
[ME37]3 !comply with the minimum efficiency T❑Does Not
1 requirements of Tables C405.9(1) ❑Not Observable
through table C405.9(5).
❑Not Applicable
C403.2.2 Natural or mechanical ventilation is ;❑Complies ;Requirement will be met.
[ME59]1 :provided in accordance with ;❑Does Not
;International Mechanical Code
;Chapter 4.Mechanical ventilation has ;❑Not Observable
capability to reduce outdoor air supply:E]Not Applicable
to minimum per IMC Chapter 4.
11 High Impact(Tier 1) 2 1 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 10 of 18
Section
# Mechanical Rough-In Inspection Complies? Comments/Assumptions
& Req.ID
C403.7.1 ;Demand control ventilation provided I❑Complies Exception:Requirement does not apply.
[ME59]1 :for spaces>500 ft2 and >25 ❑Does Not
people/1000 ft2 occupant density and I
;served by systems with air side I❑Not Observable
economizer,auto modulating outside ;❑Not Applicable ;
air damper control,or design airflow
>3,000 cfm.
C403.7.2 'Enclosed parking garage ventilation, ;❑Complies :Exception:Requirement does not apply.
[ME115]3 has automatic contaminant detection :❑Does Not.
and capacity to stage or modulate
fans to 50%or less of design capacity.;❑Not Observable
❑Not Applicable ;
C403.7.6 HVAC systems serving guestrooms in I❑Complies ;Exception:Requirement does not apply.
[ME141]3 Group R-1 buildings with > 50 ;❑Does Not
guestrooms: Each guestroom is
provided with controls that 1❑Not Observable
automatically manage temperature ;❑Not Applicable
setpoint and ventilation(see sections
C403.7.6.1 and C403.7.6.2). ;
C403.7.4_ ;Exhaust air energy recovery on ;❑Complies ;Exception:Requirement does not apply.
[ME57]1 :systems meeting Table C403.7.4(1) ❑Does Not
and C403.7.4(2). ;❑Not Observable;
❑Not Applicable
C403.7.5 Kitchen exhaust systems comply with ;❑Complies !Exception:Requirement does not apply.
[ME116]3 replacement air and conditioned PDoes Not
supply air limitations,and satisfy hood,
rating requirements and maximum [-]Not Observable
exhaust rate criteria.See section I❑Not Applicable
details.
C403.11.1 HVAC ducts and plenums insulated in I❑Complies ;Requirement will be met.
accordance with C403.11.1 and j❑Does Not
C403.11.2 constructed in accordance with
[ME60]2 C403.11.2,verification may need to :❑Not Observable
occur during Foundation Inspection, ❑Not Applicable
C403.4.1. Heating for vestibules and air curtains ;❑Complies ;Exception:Requirement does not apply.
4 with integral heating include ;❑Does Not
[ME63]2 automatic controls that shut off the
heating system when outdoor air :❑Not Observable
temperatures>45F.Vestibule ;❑Not Applicable ;
heating and cooling systems
controlled by a thermostat in the
vestibule with heating setpoint<_
60F and cooling setpoint>= 85F.
C403.10, Refrigerated display cases,walk-in ;❑Complies :Requirement will be met.
C403,10.1 coolers or walk-in freezers served by ❑Does Not
remote compressors and remote
C403.10.2 condensers not located in a :[-]Not Observable;
[ME123]3 condensing unit, have fan-powered. .❑Not Applicable
condensers that comply with Sections
C403.5.1 and refrigeration compressor;
systems that comply with C403.5.2..
Additional Comments/Assumptions:
1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 11 of 18
Section
# Rough-In Electrical Inspection Complies? Comments/Assumptions
& Req.ID
C405.2.2. ;Spaces required to have light- ❑Complies ;Requirement will be met.
2 -reduction controls have a manual :❑Does Not
[EL22]1 :control that allows the occupant to ❑Not Observable
reduce the connected lighting load in ;
a reasonably uniform illumination ;❑Not Applicable
pattern >=50 percent.
C405.2.1, ;Occupancy sensors installed in ;❑Complies ;Requirement will be met.
C405.2.1. classrooms/lecture/training rooms, ❑Does Not
1 ;conference/meeting/multipurpose
[EL18I1 ;rooms,copy/print rooms, :❑Not Observable
corridor/transition areas, ❑Not Applicable
lounges/breakrooms,enclosed offices,
;open plan office areas, restrooms,
storage rooms, locker rooms,
;warehouse storage areas,and other
spaces<= 300 sgft that are enclosed ;
by floor-to-ceiling height partitions. I
Reference section language
C405.2.1.2 for control function in ;
warehouses and section C405.2.1.3
!for open plan office spaces.
C405.2.1. :Occupancy sensors control function in ;❑Complies :Requirement will be met.
2 warehouses: In warehouses,the ;❑Does Not
[EL19]1 :lighting in aisleways and open areas is, Observable
;controlled with occupant sensors that ;
automatically reduce lighting power ;❑Not Applicable
by 50%or more when the areas are
unoccupied.The occupant sensors
control lighting in each aisleway
j independently and do not control
;lighting beyond the aisleway being
controlled by the sensor.
C405.2.1. ;Occupant sensor control function in ❑Complies ;Requirement will be met.
3 open plan office areas: Occupant E❑Does Not
[EL20]1 ;sensor controls in open office spaces
>=300 sq.ft. have controls 1) T]Not Observable;
configured so that general lighting can;❑Not Applicable
be controlled.separately in control
;zones with floor areas<= 600 sq.ft.
within the space,2)automatically turn
;off general lighting in all control zones
;within 20 minutes after all occupants
have left the space, 3)are configured
so that general lighting power in each
control zone is reduced by>= 80%of
;the full zone general lighting power
;within 20 minutes of all occupants
leaving that control zone, and 4)are
;configured such that any daylight
responsive control will activate space
general lighting or control zone
:general lighting only when occupancy
:for the same area is detected.
C405.2.2, Each area not served by occupancy ;❑Complies ;Requirement will be met.
C405.2.2. sensors(per C405.2.1) have time- :❑Does Not
11 switch controls and functions detailed ;❑Not Observable;
C405.2.2. in sections C405.2.2.1 and C405.2.2.2. ❑Not Applicable
2 ; PP e
[EL21]2
l
1 I High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\use rs$\terry.root\My Documents\COMcheck\417 com check.cck Page 12 of 18
Section
# Rough-in Electrical Inspection Complies? Comments/Assumptions
& Req.ID
C405.2.3, Daylight zones provided with ;❑Complies ;Exception:Requirement does not apply..
C405.2.3. individual controls that control the ;❑Does Not
1, lights independent of general area
C405.2.3. lighting within daylight"zones in the ;❑Not Observable
2 following spaces: 1.Spaces with a ;❑Not Applicable
[EL23]2 total of more than 100 watts of
general lighting within sidelit zones
complying with Section C405.2.3.2.
General lighting does not include
lighting that is required to have
specific application control in
accordance with Section C405.2.4. 2.
Spaces with a total of more than 100
watts of general lighting within toplit
zones complying with Section
C405.2.3.3.See code section
C405.2.3.1 Daylight responsive
control function and section
C405.2.4 ;Separate lighting control devices for ;❑Complies ;Requirement will be met.
[EL26]1 specific uses installed per approved ❑Does Not
lighting plans. ;❑Not Observable;
❑Not Applicable
C405.2.4 ;Additional interior lighting power ;❑Complies ;Requirement will be met.
[EL27]1 :allowed for special functions per the i❑Does Not
;approved lighting plans and is
;automatically controlled and :❑Not Observable
separated from general lighting. ❑Not Applicable ;
C405,2.6 Exterior lighting systems provided ;❑Complies ;Requirement will be met.
[EL28]2 with controls that comply with _ ;❑Does Not
Sections C405.2.6.1 through ;❑Not Observable;
C405.2.6.5. Decorative lighting
systems comply with Sections ;❑Not Applicable
C405.2.6.1-2,and C405.2.6.4.
C405.2.6. I Lights automatically turned off when I❑Complies ;Requirement will be met.
1 daylight is present and satifies the ;❑Does Not
[EL31]2 lighting needs.
❑Not Observable;
❑Not Applicable
C405.3 ;Exit signs do not exceed 5 watts per ;❑Complies ;Requirement will be met.
[EL6]1 face. T❑Does Not
;
❑Not Observable;
❑Not Applicable
C405.2.6. Building facade and landscape lighting;❑Complies ;Requirement will be met.
2 automatically shut off from not later ;❑Does Not
[EL32]2 than 1 hour after business closing to
not earlier than 1 hour before ,❑Not Observable
business opening. ;❑Not Applicable
C405.2.6. Lighting that is.not controlled in ;❑Complies ;Requirement will be met.
3 accordance with Section C405.2.6.2 E❑Does Not
[EL33]2 controlled so that the total wattage of ; -
such lighting is automatically reduced ❑Not Observable
by not less than 50 percent by ;❑Not Applicable ;
selectively switching off or dimming
luminaires at one of the following
times: 1. From not later than midnight
to not earlier than 6a.m.-2. From not
later than one hour after business
closing to not earlier than one hour
before business opening. 3. During
any time where activity has not been
detected for 15 minutes or more.
11 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 13 of 18
Section
# Rough-In Electrical Inspection Complies? Comments/Assumptions
& Req.ID
C405.2.6. {Time-switch controls for exterior ;❑Complies ;Requirement will be met.
4 I lighting comply with the following: 1. :❑Does Not
[EL34]2 Have a clock capable of being �❑Not Observable;
programmed for not fewer than 7 I
days. 2.Capable of being set for ❑Not Applicable
seven different day types per week. 3.
Incorporate an automatic holiday ;
setback feature.4. Have program
backup capabilities that prevent the
loss of program and time settings for
a period of not less than 10 hours in
gthe event that power is interrupted.
C405.2.6. Outdoor parking area luminaires ;❑Complies ;Exception:Requirement does not apply.
5 mounted 24'or less above the ground E❑Does Not
[EL35]2 controlled to automatically reduce the ❑Not Observable;
power of each luminaire by a
minimum of 50 percent when no ;❑Not Applicable
activity has been detected for at least
15 minutes. No more than 1500 W of
lighting power shall be controlled
together.
C405.6 Low-voltage dry-type distribution I❑Complies ;Requirement will be met.
[EL26]2 electric transformers meet the ;❑Does Not
minimum efficiency requirements of
Table C405.6. ;❑Not Observable;
UNot Applicable
C405.7 Electric motors meet the minimum ;❑Complies :Requirement will be met.
[EL27]2 efficiency requirements of Tables PDoes Not
C405.7(1)through C405.7(4). ;❑Not Observable;
3 Efficiency verified through certification ❑Not Applicable
under an approved certification pp
program or the equipment efficiency
ratings shall be provided by motor
manufacturer(where certification
programs do not exist). j
C405.8.2 Escalators and moving walks comply ;❑Complies :Exception:Requirement does not apply.
[EL28]2 with ASME A17.1/CSA B44 and have :❑Does Not
automatic controls configured to :[-]Not Observable;
reduce speed to the minimum
permitted speed in accordance with ;❑Not Applicable
ASME A17.1/CSA B44 or applicable
local code when not conveying
passengers.
C405.9 Total voltage drop across the ❑Complies ;Exception:Requirement does not apply.
[EL29]2 combination of feeders and branch ❑Does Not
circuits<=5%.
:[:]Not Observable;
I❑Not Applicable
Additional Comments/Assumptions:
11 High Impact(Tier 1) 2 1 Medium Impact(Tier 2) 3 1 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 14 of 18
Section
# Insulation Inspection Complies? Comments/Assumptions
& Req.ID
C303.1 ;Roof insulation installed per ;❑Complies ;Requirement will be met.
[IN3]1 :manufacturer's instructions. UDoes Not
'❑Not Observable
❑Not Applicable
C402.2.1 :Insulation installed on a suspended ;❑Complies ;Exception:Requirement does not apply.
[IN20]1 ceiling having ceiling tiles is not being :❑Does Not
:specified for roor/ceiling assemblies.
;Continuous insulation board installed ;❑Not Observable;
in 2 or more layers with edge joints ;❑Not Applicable
offset between layers.
C303.1.1 Building envelope insulation is labeled ;❑Complies :Requirement will be met.
[IN10]2 with R-value or insulation certificate :❑Does Not
providing R-value and other relevant
data. .❑Not Observable;
❑Not Applicable
C303.2 ;Above-grade wall insulation installed :❑Complies ;Requirement will be met.
[IN7]1 per manufacturer's instructions. :,❑Does Not
:[-]Not Observable;
❑Not Applicable
C303.2.1 Exterior insulation is protected from ;❑Complies ;Requirement will be met.
[IN14]2 damage with a protective material. ❑Does Not
Verification for exposed foundation ;
insulation may need to occur during ;❑Not Observable
Foundation Inspection. ;❑Not Applicable ;
C105.2.2 ;Installed above-grade wall insulation :❑Complies ;See the Envelope Assemblies table for values.
[IN6]1 :type and R-value consistent with :❑Does Not
;insulation specifications reported in
plans and COMcheck reports. :❑Not Observable
❑Not Applicable
C105.2.1, Installed floor insulation type and R- ;❑Complies ;See the Envelope Assemblies table for values.
C402.2.3 value consistent with insulation :❑Does Not
[IN81z specifications reported in plans and ;
COMcheck reports. :❑Not Observable;
❑Not Applicable
C402.2.6 Radiant panels and associated ;❑Complies :Exception:Requirement does not apply.
[IN18]3 components,designed for heat :❑Does Not
transfer from the panel surfaces to the
occupants or indoor space are :❑Not Observable
insulated with a minimum of R-3.5. :❑Not Applicable
C105.2.2 ;,Installed roof insulation type and R- ;❑Complies ;See the Envelope Assemblies table for values.
[IN2]1 :value consistent with insulation :❑Does Not
:specifications reported in plans and
COMcheck reports. For some ceiling ❑Not Observable
:systems,verification may need to ;❑Not Applicable
occur during Framing Inspection.
C402.5.1. ;All sources of air leakage in the ;❑Complies ;Requirement will be met.
1 :building thermal envelope are sealed, :❑Does Not
[IN1]1 ;caulked,gasketed, weather stripped
;or wrapped with moisture vapor- :❑Not Observable
permeable wrapping material to ;❑Not Applicable
minimize air leakage.
Additional Comments/Assumptions:
1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 15 of 18
Section
# Final Inspection Complies? Comments/Assumptions
&Req.ID
C303.3, ;Furnished O&M instructions for ;❑Complies ;Requirement will be met.
C408.2.5. 'systems and equipment to the TIDoes Not
2 building owner or designated Not Observable
[FI17I3 representative. ❑
❑Not Applicable
C303.3, Furnished O&M manuals for HVAC bComplies ;Requirement will be met.
C408.2.5. !systems within 90 days of system UDoes Not
3 acceptance.[F18]3 ❑Not Observable;
❑Not Applicable
C402.5.6 ;Weatherseals installed on all loading ❑Complies ;Requirement will be met.
[F137]1 1 dock cargo door openings and provide :❑Does Not
direct contact along the top and sides 1
of vehicles parked in the doorway. �❑Not Observable
❑Not Applicable ;
C402.5.8 Recessed luminaires in thermal ;❑Complies ;Exception:Requirement does not apply.
[FI26]3 envelope to limit infiltration and be IC �❑Does Not
rated and labeled.Seal between
interior finish and luminaire housing. ;❑Not Observable;
❑Not Applicable ;
C403.3.1 HVAC systems and equipment ;❑Complies Requirement will be met.
[F]27]3 capacity does not exceed calculated I❑Does Not
loads. See section details. ;❑Not Observable;
❑Not Applicable
C403.2.4. Heating and cooling to each zone is ;❑Complies ;Requirement will be met.
1 controlled by a thermostat control, :.❑Does Not
[F]47]3 Minimum one humidity control device ;❑Not Observable
per installed
humidification/dehumidification !❑Not Applicable
system.
C403.4.1, IThermostatic controls have a 5 °F ;❑Complies ;Requirement will be met.
2 deadband. UDoes Not
[F]38]3 ;❑Not Observable;
❑Not Applicable
C403.4.1. Temperature controls have setpoint ?❑Complies :Exception:Requirement does not apply.
3 overlap restrictions. ;❑Does Not
[F120]3
❑Not Observable;
❑Not Applicable
C403.4.2 Each zone equipped with setback ;❑Complies ;Exception:Requirement does not apply.
[FI39]3 controls using automatic time clock or :❑Does Not
programmable control system.
❑Not Observable;
i
❑Not Applicable
C403.2.4. Automatic Controls:Setback to 55°F ;❑Complies ;Exception:Requirement does not apply.
2.1, (heat)and 85°F(cool); 7-day clock,2- 1❑Does Not
C403.2.4. hour occupant override, 10-hour
2.2 backup ❑Not Observable;
[F]40]3 ;❑Not Applicable
C404.3 Heat traps installed on supply and ❑Complies ;Requirement will be met.
[FI11]3 discharge piping of non-circulating i❑Does Not
systems.
;❑Not Observable;
❑Not Applicable
C404.4 JAI[piping insulated in accordance with;❑Complies :Requirement will be met.
(F125]2 section details and Table C403.11.3. :❑Does Not
❑Not Observable:
❑Not Applicable
1 High Impact(Tier 1) 2 1 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 16 of 18
Section
# Final inspection Complies? Comments/Assumptions
&Req.ID
C405.4.1 ;Interior installed lamp and fixture ;❑Complies ;See the Interior Lighting fixture schedule for values.
[F[18]1 I lighting power is consistent with what �❑Does Not
is shown on the approved lighting
plans,demonstrating proposed watts ;❑Not Observable
.are less than or equal to allowed ❑Not Applicable ;
watts.
C405.5.1 ;Exterior lighting power is consistent ;❑Complies ;See the Exterior Lighting fixture schedule for values.
[FI19]1 :with what is shown on the approved :❑Does Not
:lighting plans,demonstrating
proposed watts are less than or equal ;❑Not Observable
Ito allowed watts. ;❑Not Applicable
C408.1.1 :Building operations and maintenance :❑Complies ;Requirement will be met.
[FI57]1 documents will be provided to the ❑Does Not
:owner.Documents will cover
manufacturers'information, :❑Not Observable
specifications, programming ;❑Not Applicable
;procedures and means of illustrating ;
;to owner how building, equipment and', ;
(systems are intended to be installed,
;maintained,and operated.
C408.3 ',Lighting systems have been tested to ;❑Complies j Requirement will be met.
[FI33]1 censure proper calibration,adjustment, :❑Does Not
;programming,and operation.
❑Not Observable
❑Not Applicable
Additional Comments/Assumptions:
1 High Impact(Tier 1) 2 Medium Impact(Tier 2) 3 Low Impact(Tier 3)
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 17 of 18
Project Title: Shop 417 Quaker Road Report date: 09/15/21
Data filename: \\scooby\users$\terry.root\My Documents\COMcheck\417 com check.cck Page 18 of 18
�88Q8Ei
September 15, 2021
John O'Brien E C Ol
Code Enforcement Officer D
Town of Queensbury SEP 15 2m
742 Bay Road -----
Queensbury, NY 12804 TOWN OF QUEEN',GURY
Dear Mr. O'Brien,
It is our plan to use the below contractors for our air balance test at shop 417 Quaker Road
Adirondack air balance
342 Clendon Brook Road
Queensbury, NY. 12804
Thermal Associates
21 Thomson Ave
Glens Falls NY. 12801
Please let me know if you have any questions.
e
Sincerely,
Terry P. Root
Stewart's Shops Corp.
518-581-1201 ext. 4245
Troot@stewartsshops.com
FILE COPY !
F
ate ant8
8ftOP8
September 15, 2021 _ ..
John O'Brien tom./ �-�
Code Enforcement Officer D _ y
Town of Queensbury SEp 1 2
742 Bay Road
Queensbury, NY 12804 0�NtJ Or
Dear Mr. O'Brien,
Stewart's Shops Corporation intends to use QCQA Labs for special inspections required for the
proposed 744 SQ' addition to our building located at 777 Quaker Road, Queensbury, NY 12804
for the following inspections:
1. Soil compaction
2. Concrete reinforcing
3. Concrete testing
4. Structural framing
Sincerely,
Terry P. Root
Stewart's Shops Corp.
518-581-1201 ext. 4245
Troot@stewartsshops.com