Loading...
Harvey Russell Solar Submission279 Broadway, Bldg 2 Menands, NY 12204 Main: (518) 478 - 3196 Date: 05/10/22 Laura Moore Town of Queensbury 742 Bay Rd Queensbury, New York 12804 Re: Planning Review - 1516 Ridge Road Dear Planner: This letter will describe particulars of our proposal for a south facing 25.92 kW ground-mounted PV array at 1516 Ridge Rd, Queensbury, New York 12844. Panel Glare: see attached Q. Peak Duo XL-G10.2 specification noting anti-reflection feature, second page glare notice highlighted for increased visibility. Screening: proposed array will be partially shielded from neighbor on north side by natural tall vegetation. Permeability of Parcel: with the addition of the array to the parcel there will be an 0.5% increase in impermeability for an overall impermeability of 4.1% from 3.6%. With the panel tilt being 30% the angle runoff will not be significant enough to require a management plan. Installation Trash Management: no remnants of installation beyond function and necessary pieces/parts/equipment will be removed same day and disposed of appropriately elsewhere. Removal: if for any reason the proposed array, once installed, falls out of use, for failure or otherwise, it will be removed from the parcel within 90 days of this status. General Structure Square Footage Breakdown: Structure Size 1,733 sq ft 3,074 sq ft 240 sq ft 1,037 sq ft Ranch Residence Garage area Machine Shed Covered Porch's Porch-open/deck 190 sq ft Total Area Covered: 6,274 sq ft Proposed Solar: Proposed Total: 1,348 sq ft 7,622 sq ft If there is any need to provide any additional information regarding our proposal or this project otherwise feel free to contact me with the information below. Thank you for your consideration and we look forward to working with you. Sincerely, Loreen Harvey Permitting and Development Manager (518) 478 - 3906 LHarvey@kasselmansolar.com 1 Site Plan Review application – Revised October 2016 Town of Queensbury Planning Office-742 Bay Road, Queensbury, NY 12804 TOWN OF QUEENSBURY Site Plan Review Application Review Process: 1. Required Pre-submission meeting with staff to determine general completeness to be held no later than 1 week prior to deadline day. Call (518) 761-8265 or (518) 761-8220 for an appointment. 2. Submittal of complete application: 1 original and 14 copies of the application package by monthly deadline. 3. Determination of application completeness. All necessary information must be provided and appropriate fee(s) paid for consideration for placement on an agenda for that month. 4. Incomplete applications will not be considered for placement on any agenda until all missing information has been submitted. 5. Submittal to Warren County Planning, if applicable. 6. Planning Board meeting, generally the third & fourth Tuesday of each month. You will be advised in writing as to which meeting to attend. 7. Following the meeting you will be provided with a copy of the resolution stating the Board’s decision on your application. If your application was approved, the next likely step is a Building Permit. Final drawings must be provided for the next phase of review. If your application was denied, your project cannot proceed as submitted. DOCUMENTATION REQUIREMENTS (hard copy & electronic): Please submit 1 original & 14 copies of the completed application package to include: • Completed Application pages 2-9, signed & dated • Pre-Submission Meeting Notes: signed by staff • Copy of Deed • Checklist & Plot Plan • Environmental Assessment Form for any non-residential project • Fee: $100 (0 – 10,000 sq. ft.); $250 (10,001 – 30,000 sq. ft.); $500 (30,001 -100,000 sq. ft.); $1,000 (100,000+ sq. ft.) Staff & Contact Information: Craig Brown, Zoning Administrator craigb@queensbury.net Laura Moore, Land Use Planner lmoore@queensbury.net Sunny Sweet, Office Specialist – Planning sunnys@queensbury.net (518) 761-8220 Visit our website at www.queensbury.net for further information and forms 2 Site Plan Review application – Revised October 2016 Town of Queensbury Planning Office-742 Bay Road, Queensbury, NY 12804 General Information Tax Parcel ID Number: ____________________ Zoning District: ____________________ Lot size: _____________________ Detailed Description of Project [includes current & proposed use]: __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ Location of project: ________________________________________________________________________________ Applicant Name: Address: Home Phone Cell: Work Phone Fax E-Mail: Agent’s Name: Address: Home Phone Cell: Work Phone Fax E-mail Owner’s Name Address Home Phone Cell Work Phone Fax E-mail 3 Site Plan Review application – Revised October 2016 Town of Queensbury Planning Office-742 Bay Road, Queensbury, NY 12804 Site Development Data Area / Type Existing sq. ft. Proposed Addition sq. ft. Total sq. ft. A. Building footprint B. Detached Garage C. Accessory Structure(s) D. Paved, gravel or other hard surfaced area E. Porches / Decks F. Other G. Total Non-Permeable [Add A-F] H. Parcel Area [43,560 sq. ft. / acre] I. Percentage of Impermeable Area of Site [I=G/H] Setback Requirements Area Required Existing Proposed Front [1] Front [2] Shoreline Side Yard [1] Side Yard [2] Rear Yard [1] Rear Yard [2] Travel Corridor Height [max] Permeability No. of parking spaces 4 Site Plan Review application – Revised October 2016 Town of Queensbury Planning Office-742 Bay Road, Queensbury, NY 12804 Additional Project Information 1. Will the proposal require a Septic Variance from the Town Board of Health? _______________ 2. If the parcel has previous approvals, list application number(s): _________________________ 3. Does this project require coverage under the New York State Pollutant Discharge Elimination System (SPDES) Permit Program ? _______________ 4. Estimated project duration: Start Date __________ End Date __________ 5. Estimated total cost of project: _______________ 6. Total area of land disturbance for project: _______________ Floor Area Ratio Worksheet FLOOR AREA RATIO (FAR) -- The relationship of building size to lot size, derived by dividing the total building floor area by the lot size in square feet, yielding a percentage. Zoning District Symbol Floor Area Ratio [FAR] Waterfront Residential WR 0.22 Commercial Moderate/ Intensive CM/ CI 0.3 A. The combined area of all square footage, as measure from exterior walls of all structures on the property, including all floors of the structures, garages, basements and attics with more than five (5) feet of ceiling height and covered porches. Building square footage does not include: Open deck, docks and that portion of covered docks extending over water and one storage shed of one hundred twenty (120) square feet or less. Any additional sheds will be included. (See “FLOOR AREA RATIO”). B. Commercial or industrial: the total area in square feet as measured from the exterior of the outside walls of a building or structure, and when applicable, the sum total of all floor areas of the principal and accessory buildings or structures on the project site. A. Parcel Area ___________________________ sq. ft. B. Existing Floor Area ___________________________ sq. ft. [see above definition] C. Proposed Additional Floor Area ___________________________ sq. ft. D. Proposed Total Floor Area ___________________________ sq. ft. E. Total Allowable Floor Area ___________________________ (Area x _____) [see above table] *If D is larger than E. a variance or revisions to your plan may be needed. Consult with Staff. 5 Site Plan Review application – Revised October 2016 Town of Queensbury Planning Office-742 Bay Road, Queensbury, NY 12804 § 179-9-080 Requirements for Site Plan Approval. The Planning Board shall not approve a Site Plan unless it first determines that such site plan meets the following Standards. Please prepare responses to each of the following topics: STANDARDS A. The proposed project furthers or is consistent with the policies of the Town’s Comprehensive Plan. B. The proposed project complies with all other requirements of this Chapter, including the site plan review standards as set forth in Paragraph F of this section, the dimensional, bulk and density regulations of the zoning district in which it is proposed to be located (Article 3 and Table 1), the applicable requirements of all other Articles that apply. C. The site plan encourages pedestrian activity internally and, if practicable, to and from the site with pedestrian paths or sidewalks connected to adjacent areas. D. The site plan must conform to Chapter 136 Sewage and Sewage Disposal, Chapter 147 Stormwater Management Local Law, and other applicable local laws. E. The proposed use shall be in harmony with the general purpose or intent of this Chapter, specifically taking into account the location, character and size of the proposed use and the description and purpose of the district in which such use is proposed, the nature and intensity of the activities to be involved in or conducted in connection with the proposed use and the nature and rate of any increase in the burden on supporting public services and facilities which will follow the approval of the proposed use. F. The establishment, maintenance and operation of the proposed use will not create public hazards from traffic, traffic congestion or the parking of vehicles and/or equipment or be otherwise detrimental to the health, safety or general welfare of persons residing or working in the neighborhood or to the general welfare of the town. Traffic access and circulation, road intersections, road and driveway widths and traffic controls will be adequate. G. Off-street parking and l9oading facilities will be appropriately located and arranged and sufficient to meet traffic anticipated to be generated by the new use. The establishment of vehicle links between parking areas of adjacent properties are provided where feasible. This furthers the Town’s goal of reducing curb cuts and reducing congestion. A twenty-foot wide connection is required. If adjacent properties are either undeveloped or previously developed without having made provision for future linkage, then a future connection must be identified and provided for in the site plan under review for such future linkage when the time arises. The Planning Board may require proof that the applicant has made contact with adjacent property owners for purposes of coordinating linkages with adjacent properties. H. The project shall not have an undue adverse impact upon the natural, scenic, aesthetic, ecological, wildlife, historic, recreational or open space resources of the town or the Adirondack Park or upon the adequate provision of supporting facilities and services made necessary by the project, taking into account the commercial, industrial, residential, recreational or other benefits that might be derived from the project. In making the determination hereunder, the Planning Board shall consider those factors pertinent to the project contained in the development considerations set forth herein under § 179-9-080 of this Chapter, and in so doing, the Planning Board shall make a net overall evaluation of the project in relation to the development objectives and general guidelines set forth in § 179-9-080 of this Article. I. The provision for and arrangement of pedestrian traffic access and circulation, walkway structures, control of intersections with vehicular traffic and overall pedestrian convenience shall be safe and adequate for pedestrian movement. Pedestrian connections between adjacent sites shall be provided to encourage pedestrian use. J. Stormwater drainage facilities will prevent an increase of post development drainage flows as compared to pre-development drainage flows. Drainage of the site shall recharge ground water to the extent practical. Surface waters flowing off-site shall not degrade any streams or adversely affect drainage on adjacent properties or public roads. Facilities shall be in conformance with the drainage standards of Chapter 147 of the Town Code and the Town of Queensbury Subdivision Regulations where applicable. K. The water supply and sewage disposal facilities will be adequate and will meet all applicable and current requirements set forth by Department of Health regulations and Chapter 136 of the Town Code. L. The adequacy, type and arrangement of trees, shrubs and other suitable plantings, landscaping and screening shall effectively provide a visual and/or noise buffer between the applicants and adjoining lands, including the maximum retention of existing vegetation and maintenance, including replacement of dead or deceased plants. M. Fire lanes, emergency zones and fire hydrants will be adequate and meet the needs and requirements of emergency service providers. N. The design of structures, roadways and landscaping in areas susceptible to ponding, flooding and/or erosion will minimize or avoid such impacts to the maximum extent practicable. O. The site plan conforms to the design standards, landscaping standards and performance standards of this chapter. 6 Site Plan Review application – Revised October 2016 Town of Queensbury Planning Office-742 Bay Road, Queensbury, NY 12804 § 179-9-050 Checklist-Application for Site Plan Review. Application materials and site plan shall include sufficient information for the Board to review and provide a decision. The applicant is to provide a site plan drawing and all attachments that address items A-V. The applicant may request a waiver from A-V and is to provide reasons for waiver(s) requested. Please label information to be submitted. REQUIREMENTS Sheet # A. A vicinity map drawn at the scale that shows the relationship of the proposal to existing community facilities which affect or serve it, such as roads, shopping areas, schools, etc. The map shall also show all properties, identify owners, subdivisions, streets and easements within 500 feet of the property. Such a sketch may be superimposed on a United States Geological Survey map of the area. B. The site plan shall be drawn at a scale of forty feet to the inch (1” = 40 feet) or such other scale as the Planning Board may deem appropriate, on standard 24” x 36” sheets, with continuation on 8 l/2 “x 11” sheets as necessary for written information. The information listed below shall be shown on the site plan and continuation sheets. C. Name of the project, boundaries, date, north arrow, and scale of the plan. D. Name and address of the owner of record, developer, and seal of the engineer, architect or landscape architect. If the applicant is not the record owner, a letter of authorization shall be required from the owner. E. The location and use of all existing and proposed structures within the property, including all dimensions of height and floor area, all exterior entrances, and all anticipated future additions and alterations. F. The location of all present and proposed public and private ways, off-street parking areas, driveways, outdoor storage areas, sidewalks, ramps, curbs, paths, landscaping, walls and fences. Location, type and screening details for all waste disposal containers shall also be shown. G. The location, height, intensity and bulb type (sodium, incandescent, etc.) of all external lighting fixtures. The direction of illumination and methods to eliminate glare onto adjoining properties must also be shown in compliance with § 179-6-020. H. The location, height, size, materials and design of all proposed signs. I. The location of all present and proposed utility systems including: 1. Sewage or septic system; 2. Water supply system; 3. Telephone, cable and electrical systems; and 4. Storm drainage system including existing and proposed drain lines, culverts, catch basins, headwalls, endwalls, hydrants, manholes and drainage swales. J. Plans to prevent the pollution of surface or groundwater, erosion of soil both during and after construction, excessive runoff and flooding of other properties, as applicable. A Stormwater Pollution Prevention Plan (SWPPP) for all land development activities (excluding agricultural activities) on the site that results in land disturbance of one acre or more. A SWPPP shall comply with the requirements of the DEC SPDES MS-4 General Permit and Chapter 147 of the Town of Queensbury Code. It shall be at the discretion of the Planning Board as to whether a SWPPP or an erosion and control plan shall be required for a site plan review project land disturbance of less than one acre. K. Existing and proposed topography at two-foot contour intervals, or such other contour interval as the Planning Board shall allow. All elevations shall refer to the nearest United States Coastal and Geodetic Bench Mark. If any portion of the parcel is within the 100-year floodplain, the area will be shown and base flood elevations given. Areas shall be indicated within the proposed site and within 50 feet of the proposed site where soil removal or filling is required, showing the approximate volume in cubic yards. L. A landscape plan showing all existing natural land features than may influence the design of the proposed use such as rock outcrops, stands of trees, single trees eight or more inches in diameter, forest cover and water sources and all proposed changes to these features, including sizes and types of plants. Water sources include ponds, lakes, wetlands and watercourses, aquifers, floodplains and drainage retention areas. M. Land Use District boundaries within 500 feet of the site’s perimeter shall be drawn and identified on the site plan, as well as any Overlay Districts that apply to the property. 7 Site Plan Review application – Revised October 2016 Town of Queensbury Planning Office-742 Bay Road, Queensbury, NY 12804 REQUIREMENTS (CONTINUED) Sheet # N. Traffic flow patterns within the site, entrances and exits, loading and unloading areas, as well as curb cuts on the site and within 100 feet of the site. The Planning Board may, at its discretion, require a detailed traffic study for large developments or for those in heavy traffic areas, which shall include: 1. The projected number of motor vehicle trips to enter or leave the site, estimated for weekly and annual peak hour traffic levels; 2. The projected traffic flow pattern including vehicular movements at all major intersections likely to be affected by the proposed use of the site; 3. The impact of this traffic on levels of service on abutting public streets and at affected intersections. Existing and proposed weekly and annual peak hour traffic levels and road capacity levels shall also be given. O. For new construction or alterations to any structure, a table containing the following information shall be included: 1. Estimated area of structure to be used for particular purposes such as retain operation, office, Storage, etc.; 2. Estimated maximum number of employees; 3. Maximum seating capacity, where applicable; and 4. Number of parking spaces existing and required for the intended use. P. 1. Floor Plans. 2. Elevations at a scale of one-quarter inch equals one foot (1/4” = 1 foot) for all exterior facades of the proposed structure(s) and/or alterations to or expansions of existing facades, showing design features and indicating the type and color of materials to be used. Q. Soil logs, water supply well and percolation test results, and storm water runoff calculations as needed to determine and mitigate project impacts. R. Plans for disposal of construction and demolition waste, either on-site or at an approved disposal facility. S. Plans for snow removal, including location(s) of on-site snow storage. T. An Environmental Assessment Form (“EAF”) as required by the SEQRA regulations, with Part 1 completed by the Applicant shall be submitted as part of the application. If the proposed project requires a special use permit and an EAF has been submitted in conjunction with a special use permit application, a duplicate EAF is not required for the site plan application. U. If an application is for a parcel or parcels on which more than one use is proposed, the applicant may submit a single application for all such uses, provided the proposed uses are accurately delineated on a site plan drawn pursuant to the requirements set forth above. The Planning Board may grant the application with respect to some proposed uses and not others. For purposes of reviewing an application (and for SEQRA compliance) all proposed uses on a single parcel or on contiguous parcels shall be considered together. V. A brief narrative statement on how the project proposed for review furthers or is consistent with the vision, goals and policies in the Town’s Comprehensive Plan. Town of Queensbury Site Plan Pre-Submission Conference Form / Section 179-9-040 1. Applicant Name: __________________________________________________ 2. Tax Map ID ________________ Location: _______________________ 3. Zoning Classification __________ 4. Reason for Review: __________________________________________________________ 5. Zoning Section #: ________________________ 6. Pre-Submission Meeting Notes: Provided Outstanding; Please provide by Deed ____ _____________ General Information complete ____ _____________ Site Development Data Complete ____ _____________ Setback Requirements Complete ____ _____________ Additional Project Information Complete ____ _____________ FAR addressed ____ _____________ Requirements for Site Plan-Standards ____ _____________ Checklist items addressed ____ _____________ Environmental Form completed ____ _____________ Signature Page completed ____ _____________ Staff Representative: ________________________________ Applicant / Agent: ________________________________ Date: ___________ Loreen Harvey/Rory Russell 266.3-1-76.1 6.10ac 1516 Ridge Road MDR applicant proposes a ground mounted solar array for 25.92 kW (54 panels) with a total of 1,348 sq ft 179-5-140Solar X X X NA X X X MDR permeability is 50% Subdivision 10-2020 X list attachments - remove compliant wording Laura Moore via email10/4/2022 10/4/2022 via email Applicant proposes a ground mounted solar project for 25.92kW (54 panels)approximately 1,348 sq ft. The existing home 5,035 sq ft is to remain with no changes. The project will be located on the north property line where no vegetation is to be removed. Site Plan for ground mounted solar project for residential use. Area Variance for setback of project where a 75 ft setback is required and a 0 ft setback is proposed. Items reviewed: site plan application, variance application, solar panel information sheets, site drawing, and subdivision drawing used to show lot where panels are to be located. Items to be updated or provided 1) update data sheet for permeability to 50% versus 75% 2) survey needs to be stamped by surveyor and to be submitted as full size plan 3) page 4 add project information Subdivision 10-2020 4) page 6 and 7 - list attachments ie survey, site drawing, no changes, waiver requested. 5) page 8 - this pre application form will need to be included in the submission 8 9 Site Plan Review application – Revised October 2016 Town of Queensbury Planning Office-742 Bay Road, Queensbury, NY 12804 Signature Page This page includes the 1.) Authorization to Act as Agent Form: 2.) Engineering Fee Disclosure; 3.) Authorization for Site Visits; 4.) Other Permit Responsibilities; 5.) Official Meeting Disclosure and 6.) Agreement to provide documentation required. OWNER’S AGENT FORM: Complete the following if the OWNER of the property is not the same as the applicant Owner: ____________________________________ Designates: ____________________________________ As agent regarding: _____ Variance _____ Site Plan _____ Subdivision For Tax Map No.: _____ Section _____ Block _____ Lot Deed Reference: _____ Book _____ Page _____ Date OWNER SIGNATURE: ___________________________________ DATE: _______________ APPLICANT’S AGENT FORM: Complete the following if the APPLICANT is unable to attend the meeting or wishes to be represented by another party: Owner: ____________________________________ Designates: ____________________________________ As agent regarding: _____ Variance _____ Site Plan _____ Subdivision For Tax Map No.: _____ Section _____ Block _____ Lot Deed Reference: _____ Book _____ Page _____ Date OWNER SIGNATURE: ___________________________________ DATE: _______________ 2.) ENGINEERING FEE DISCLOSURE: Applications may be referred to the Town consulting engineer for review of septic design, storm drainage, etc. as determined by the Zoning or Planning Department. Fees for engineering review services will be charged directly to the applicant. Fees for engineering review will not exceed $ 1,000 without notification to the applicant. 3.) AUTHORIZATION FOR SITE VISITS: By signing this page and submitting the application materials attached herein, the Owner, Applicant, and his/her/their agent(s) hereby authorize the Zoning Board or Planning Board and Town Staff to enter the subject properties for the purpose of reviewing the application submitted. 4.) OTHER PERMIT RESPONSIBILITIES: Other permits may be required for construction or alteration activity subsequent to approval by the Zoning Board or Planning Board. It is the applicant’s responsibility to obtain any additional permits. 5.) OFFICIAL MEETING MINUTES DISCLOSURE: It is the practice of the Community Development Department to have a designated stenographer tape record the proceedings of meetings resulting from application, and minutes transcribed from those tapes constitutes the official record of all proceedings. 6.) AGREEMENT TO PROVIDE DOCUMENTATION REQUIRED: I, the undersigned, have thoroughly read and understand the instructions for submission and agree to the submission requirements, I acknowledge no construction activities shall be commenced prior to issuance of a valid permit. I certify that the application, plans and supporting materials are a true and complete statement/description of the existing conditions and the work proposed, and that all work will be performed in accordance with the approved plans and in conformance with local zoning regulations. I acknowledge that prior to occupying the facilities proposed, I or my agents, will obtain a certificate of occupancy as necessary. I also understand that I/we may be required to provide an as-built survey by a licensed land surveyor of all newly constructed facilities prior to issuance of a certificate of occupancy I have read and agree to the above. ____________________________ ___________________________ __________________ Signature [Applicant] Print Name [Applicant] Date signed ____________________________ ___________________________ __________________ Signature [Agent] Print Name [Agent] Date signed Rory Russell Loreen Harvey: Kasselman Solar, LLC. X X 266.3 1 76.1 6193 258 9/23/20 Rory Russell Loreen Harvey 8/3/2022 DocuSign Envelope ID: 0E33BC04-FB36-4925-AA76-E73021A4E785 8/4/2022 | 4:49 PM PDT 8/4/2022 | 4:49 PM PDT 279 Broadway Building #2 Menands, NY 12204 (518)-478-8365 (518)-953-1095 Fax I (Customer) hereby authorize Kasselman Solar LLC, to act as customer, agent & contractor, and to submit all necessary permit applications and supporting documents to the Town Building Department on my behalf. Customer Name (Print) Customer Signature Customer Address Municipality that issues your Building Permit Kasselman Solar Employee Signature DocuSign Envelope ID: 7347D667-814A-47E5-BA7B-2610D42D92BD Rory Russell Rory Russell Queensbury 1516 Ridge Road Kattskill Bay New York 12844 Page 1 of 3 Short Environmental Assessment Form Part 1 - Project Information Instructions for Completing Part 1 – Project Information. The applicant or project sponsor is responsible for the completion of Part 1. Responses become part of the application for approval or funding, are subject to public review, and may be subject to further verification. Complete Part 1 based on information currently available. If additional research or investigation would be needed to fully respond to any item, please answer as thoroughly as possible based on current information. Complete all items in Part 1. You may also provide any additional information which you believe will be needed by or useful to the lead agency; attach additional pages as necessary to supplement any item. Part 1 – Project and Sponsor Information Name of Action or Project: Project Location (describe, and attach a location map): Brief Description of Proposed Action: Name of Applicant or Sponsor: Telephone: E-Mail: Address: City/PO: State: Zip Code: 1.Does the proposed action only involve the legislative adoption of a plan, local law, ordinance, administrative rule, or regulation? If Yes, attach a narrative description of the intent of the proposed action and the environmental resources that may be affected in the municipality and proceed to Part 2. If no, continue to question 2. NO YES 2.Does the proposed action require a permit, approval or funding from any other government Agency? If Yes, list agency(s) name and permit or approval:NO YES 3.a. Total acreage of the site of the proposed action? __________ acres b. Total acreage to be physically disturbed? __________ acres c. Total acreage (project site and any contiguous properties) owned or controlled by the applicant or project sponsor? __________ acres 4.Check all land uses that occur on, are adjoining or near the proposed action: 5. Urban Rural (non-agriculture) Industrial Commercial Residential (suburban) Aquatic Other(Specify):□ Forest Agriculture □ Parkland Page 2 of 3 5.Is the proposed action, a.A permitted use under the zoning regulations? b.Consistent with the adopted comprehensive plan? NO YES N/A 6.Is the proposed action consistent with the predominant character of the existing built or natural landscape?NO YES 7.Is the site of the proposed action located in, or does it adjoin, a state listed Critical Environmental Area? If Yes, identify: ________________________________________________________________________________ NO YES 8.a. Will the proposed action result in a substantial increase in traffic above present levels? b.Are public transportation services available at or near the site of the proposed action? c.Are any pedestrian accommodations or bicycle routes available on or near the site of the proposed action? NO YES 9.Does the proposed action meet or exceed the state energy code requirements? If the proposed action will exceed requirements, describe design features and technologies: _____________________________________________________________________________________________ _____________________________________________________________________________________________ NO YES 10.Will the proposed action connect to an existing public/private water supply? If No, describe method for providing potable water: _________________________________________ _____________________________________________________________________________________________ NO YES 11.Will the proposed action connect to existing wastewater utilities? If No, describe method for providing wastewater treatment: ______________________________________ _____________________________________________________________________________________________ NO YES 12. a. Does the project site contain, or is it substantially contiguous to, a building, archaeological site, or district which is listed on the National or State Register of Historic Places, or that has been determined by the Commissioner of the NYS Office of Parks, Recreation and Historic Preservation to be eligible for listing on the State Register of Historic Places? archaeological sites on the NY State Historic Preservation Office (SHPO) archaeological site inventory? NO YES 13. a. Does any portion of the site of the proposed action, or lands adjoining the proposed action, contain wetlands or other waterbodies regulated by a federal, state or local agency? b.Would the proposed action physically alter, or encroach into, any existing wetland or waterbody? If Yes, identify the wetland or waterbody and extent of alterations in square feet or acres: _____________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ NO YES b. Is the project site, or any portion of it, located in or adjacent to an area designated as sensitive for Page 3 of 3 14.Identify the typical habitat types that occur on, or are likely to be found on the project site. Check all that apply: □Shoreline □ Forest Agricultural/grasslands Early mid-successional Wetland □ Urban Suburban 15.Does the site of the proposed action contain any species of animal, or associated habitats, listed by the State or Federal government as threatened or endangered?NO YES 16.Is the project site located in the 100-year flood plan?NO YES 17.Will the proposed action create storm water discharge, either from point or non-point sources? If Yes, a.Will storm water discharges flow to adjacent properties? b.Will storm water discharges be directed to established conveyance systems (runoff and storm drains)? If Yes, briefly describe: _____________________________________________________________________________________________ _____________________________________________________________________________________________ NO YES 18.Does the proposed action include construction or other activities that would result in the impoundment of water or other liquids (e.g., retention pond, waste lagoon, dam)? If Yes, explain the purpose and size of the impoundment:______________________________________________ ____________________________________________________________________________________________ _ NO YES 19.Has the site of the proposed action or an adjoining property been the location of an active or closed solid waste management facility? If Yes, describe: _______________________________________________________________________________ _____________________________________________________________________________________________ NO YES 20.Has the site of the proposed action or an adjoining property been the subject of remediation (ongoing or completed) for hazardous waste? If Yes, describe: _______________________________________________________________________________ _____________________________________________________________________________________________ NO YES I CERTIFY THAT THE INFORMATION PROVIDED ABOVE IS TRUE AND ACCURATE TO THE BEST OF MY KNOWLEDGE Date: _____________________ Applicant/sponsor/name: ____________________________________________________ __________________________ Signature: _____________________________________________________Title:__________________________________ EAF Mapper Summary Report Thursday, April 14, 2022 12:02 PM Disclaimer: The EAF Mapper is a screening tool intended to assist project sponsors and reviewing agencies in preparing an environmental assessment form (EAF). Not all questions asked in the EAF are answered by the EAF Mapper. Additional information on any EAF question can be obtained by consulting the EAF Workbooks. Although the EAF Mapper provides the most up-to-date digital data available to DEC, you may also need to contact local or other data sources in order to obtain data not provided by the Mapper. Digital data is not a substitute for agency determinations. Part 1 / Question 7 [Critical Environmental Area] No Part 1 / Question 12a [National or State Register of Historic Places or State Eligible Sites] No Part 1 / Question 12b [Archeological Sites]Yes Part 1 / Question 13a [Wetlands or Other Regulated Waterbodies] No Part 1 / Question 15 [Threatened or Endangered Animal] No Part 1 / Question 16 [100 Year Flood Plain]Digital mapping data are not available or are incomplete. Refer to EAF Workbook. Part 1 / Question 20 [Remediation Site]Yes 1Short Environmental Assessment Form - EAF Mapper Summary Report Town of Qt ie inibl Common: av Devclorn'eni. C)Tzr' 42 Bay Road, Qucen buty, NY .2,S,,4 6. nz applicant must Kuhn -fit a copy ofthe fthowitog to the Tovm Lands NIF of Town ofQucims' bury Planning Board a) The project N01 (Notice of Interif) for coverage under the current NYSDE'C SPDES General permit or for cOvelA90 ander an individual SPDES prior to the Stan of any site -work. John & Rosann Curran RES011UTION -.-Approve b) The projectNOT I'NoticerifTernimanion) upon completion oftla, Project; and B:1315 P:134 Subdivision Final Stage 10-2020 BFNJAMN AROTTSONi TRUST., Subdivision Tax N-14 ID; 266.3-1-76 1 Property Address; 1516 Ridge Road I Zoning: MDR 7 The applicant must tnairliain on their project sire, for re -view by staff-t 2GC.3-1-74 a) The approved final that have been starriped by the Town Zoning -Administrator, These plans must 84*38 '40" t SWPPp (Storm Water Pollution Prevention plain) when such a plan was preparedincludethe, proje E 1k suMvisirm application has been made to the Queensoury Planning Board for'llie following: Applicant and approved; and 755 34b) The project N'01 anM proof. of coverage under the carrenti\ wSDEC SPDES General Permit orproposesatwolotsubdivisionof10,32 acres. The two lot-, include Lot I of 6,10 acre, with a 5,434 sq. ft. an individual SPI)ES perorit issued for the project Development Department before any further review by the Zoning Administrator or Building and Codes Pursuant to relevant sections of the Town of QueQnslairy Zoning C.ode-Chapler A- 183, the Planning Board penanol. footprint) -single farafly home and shed, and Iot 'I of 4.22 acres with a 3,320 sq, I (footprint) garage building, Pursuranto Chapter 183 ofthie Zoning Orifinarioc, subdivision ofland shall besubject to Planning Board review and approval. 8, Final approved plans, In compliance tyifli the Subdivision, must be submitted to the Community to has deterruacdthat this proposal satisifies the requirements as stated in the Zoning Code; Theapplicant mitu rutot,,,,,ith stalf-aller approval and p1jorto issuance ofBailding Permit andlar the beg -ring ofany Sitz 'Awk. The Planning Board made a. recommendation to the Zoning Board of Appeals on 08111312020; the ZBA approved the-vatiarce requests on 08AW2020; Subsequent issuarica, of forther p -1 compliance with thisenma, firetudinig building, permits is dependent qa A public licatingwasacherhAcd and held on 08125120,20; and all other wrididons 'ofthis resolution; Qe fids application is supported vdth all doQuineirtatioti, public comniera, and applicationman,,riai i n the file of 11. As-Infilt plans to ccrtify that the subdivision Is developed according to dreapproved plans in be provided record; Brigar to issuance of tile, 0extifeate foccuparicy; STkICA"Ab-102i(i 9t-Nd-A414U, ARONSON TRUST, Seconded by tfichael Valtaunie. Duly adopted this,25" day of Augusti 2020 by the following vole: Introduced by David Deeb who inoved its adolifitur AYES: A4r. Deeb, Ms. White, Mr, Shafer, %Ar Ifunsingor, Mr. Mago"Wari, N1r. Valentine, Mr; Traver I The requirements, ofthe State, Q'wifty Review Act have beer, considered and the Plartanig Board has adopted a S RA Neggafive Dool,nation; and if the applicirdon is a Modification, the 'qOES: _NONF requirements of the State Environmental Quality Review Act have been oonsidincal, and thc proposed modification(s] do -not result in any new or significantly different environmental impacts, and, therofore,, Poi further- SEQRA review, is necessary, 2. WaiverlrequestsgrIinkA: sketch plan stage, stoitilwator and grading, field 3, T4c approval is valid for one (1) year arriatho daie, ofapprovid. You are responsible for requesting an axtension of approval before the one (1) yelv firw,, frame has expired ifyou have not yet applied for a buiHing permit or cornmenoc4 significant site wofli, 41 The liarits of clearing will constitute a no -cut buffer zone, orange, consiruction fencing shall be installed around these, areas and field Yerifled by Commurritv Development staff S. Ftigintering sigri-offrequired prior to 3ilinanne ofRianning Board Chairman- Iago 2 of 2. ""A Lean -To J of2 SIR MIN Lot 265888.4 Sq. Feeto q 6.10 Acres12IlayRmd, wii iq ay. lll=e: 5IV45.441371742 Bay Roati, Quevmbuty, MY 5IS:77uLi3 r tfax; mg,74_.43'7!' NY Cedar He&'J' Ro e Part, of 266.3-1-76 73W", Town of QUI eurbury Planning Board SEQ11RFSOLUTION -GrantNegativoDeclaradini rinal Stage 10-2026 BENIKkONT ARONSON\ TRUSTSul: div S ibdivi,sionTwf.NlapIT):2663-1-76/Prc,t e,rt,Addmss 1516RidgeRoad tZoning:1ADR 71o, applicant proposes a two lot subdivision of 10.32 acres. The, two lots include Lot I of 6,10 acres with a 5,434 sq. ft, (footprint) single family horne and shed, and I,ot 2 of 4.22 acres with a 3,320 oq, ft. (footprint) _ U garage building. Pursuant to Chapter 183 of the Zoning Ordinance, subdivision of land shall be subject to Maturing Board review Lind approval- 0 13,1coThePlanningBoardhasdouaraftredthattheproposedprojeaandPlanningBoardactionsubjecttoreview under the Snue Eirviromnemal Quality Review Act, The proposial action considered by this Board is Unlisaid it, the Department of Environmental Conservation Regulations implementing the State Environmental Quality Review Act and, the regulations of the Towm of Q -ilsbury; ue, o Federal or other agencies are involved; Part I ofthe Long LAF has been cornplev-4 by the applicam; Part 2 ofthe Long FAF has been roviewed. by the Plairming board; T_Tpoir review of the inforroation, recorded on this EAV, it is the conclusion of the Trivm of Queensibury Planning cm S 84036*47' "_ ..... icant adverse Impacts on the environment, aad Board as lead agency that this project wili result in no signif therefore, an environmental imp aci: statement Aced orit be prepared, Accordingly, this negative declaration is 1,92.80, T G T A NEGATYNVE DR A RY &YAGK 9-2020 BENJANHN J _ hurodiwed by David Deeb who rarrvad for its adoption, seconded 5ieln2ffA4Q1Dh_5Q_N TRIJS-- L Propo5edyMichaelValentina; Lot Lne 84036'4;r" EAspertheresolutionpreparedbysialf. J 30 16-14? 1, Part It ofibe Long EAT' has been reviewe4aad eompleted by 1h, Planning Board, _ty 1 Part Ift of the LongEAF is nor nQoossaq because di, Planning Board did not identify potentially moderate in large impacts, 0 Duly adopted this 25" day of August, 2020 by the following vote, N 84'36'47 WExisting & Proposed ---- AYFS, Mr Magowari,Mr, Valentino, lvlr Deeb, Mks, White, My, hater, i I g T X.-ORS: NONE -1-77.11' 266.3 51591.5 Sq. Feet 1.18 Acres I'lime: 518.76LV20 I Fio,: 5l&745_4437 i'142 Bay Roadi Qw mbuy, NY 1,2804 MOM Town a Qrmm'Aiuny C inyouna Develo Z 0 T is 14' Hickon with INtre 14' Hickory with Wire I I 22 barbed Wine rdn'ja une Lands i James & Elizi B:425 2GG-4 742 Bay Rjad Ome,,nsbury, NY 12904 Lands NIF of John J. Carpenter B:4416 P:207 ToWn of'Quoewibury Planning Board E0 2GG.3- 1-80 RES01AY1710N -Approw ( 1) -S _0 0 Subdivision Prelurrinary Stage )-2020BENfAj,fINARONS(-),TRUFjl' G O!j- A sub<livision application has been made to the Queersbuty Planning Board for the fblloviing; Applicant Lot 2 proposes a two lotsubdivision of 1032 acres. The two lou include Iru I of 6.10 acres writh, a 5,434 sq. 1 1footprint) single family home and glied, and Lot 2 of 4.22 acres with a 3,320 sq, ft, (finotprint) garage 183626.0 Sq. Feet map of Lands of briildirg Pursuant to Claipter IV of the Zoning Ordinance, subdivision of land shall bestiIjeol to planning lu Mark A. CassidyBoardrevri'm and sipprovaL 4.22 Acres Propane Tank % By: Leslie W. Coulter Pursuant to relevant sections of the Town of Quecusbury Zoning Code -Chapter A-183 the, Planning Board has Part of, 266.3-1-761-A Rip RapdeterminedthattlaitZoningCpipKap;CX"' Dated: September 17, 1947aproposalsalisfiestherequirementsasstatedinthe. od, well The Planuing Board made a recummondation to the Zoning Board of Appeals on 08/1&12020; the ZBA Map of Lands ofapprovedthevarianmrequestson0818Sti2020: Gilbert and Anna MailleTherequireniarasoftheStateEnvironmentalQualityReviewActhavebeenconsideredandthePlanningliteE)i5h Board has adopted a 'VeQR,11 Negative Declaration 0%51 Being part of the John Lawrence Patent By: Glen B. Coultergvm schodaled and hold on 09125j2020., 41Apublichear' n, 01 1 , 0 Propane Tank Dated: Ju11-da application issupp,rterl with all documentation, public comment, and application material in the file of ly 1, 1959 record, Revised: September 19, 1985 Approx. Tree brie Map of SurveyNtmeter Alotion scoondod by Brad Mag— Duly adloprr,tj thiiz, 2511, dav, ofAugriat, 2020 by the following vine: of Lands to be Conveyed from AYE, S: Mr. Valentine, h1r. Dteb Nfs'7 White, A -It Shorter, Nit, Hunsinger, Mr. 1 vbtgowau, Mr. Travier Carol L. Baker 99. 95, 140E ONL BY: W.J. Rourke, Associates IV in - Dated: April 17, 200781*53".30"1 Updated: August 1, 20084 Ily, Deed ReferenceI" Gravel DrtvZ field Utility Benjamin L. Aronson Vho;-' 518.74,-.443-"742-,Ia e-Rc,',Queensbu,yNY Pole TO Benjamin L. Aronson Trust OTES: 6,99. 9,&, Dated: October 17, 2016 1.) TH15 MAP WAS PREPARED WITHOUT THE 13ENEfIT OF AN ABSTRACT OF Cfa'rl Link TITLE OR AN UP TO DATE TITLE REPORT AND15 THEREFORE SUBJECT 70 JNV 810 Recorded: October 18, 2016 ANY STATEMENT OF FACTS SHOWN THEREON. LD 5UKVff(W2JTHEFt, AS CONDUCTED DURING WINTER WEATHER Harold L. Fetter J. CONDITIONS WITH SIGNIFICANT SNOW ANDICE COVER, 10 - Michelle Fetter 3) PARCEL 15 -9UBjf CT TO ANY EASEMENTS Of RECORD. Laureen Purcell Q) 4.) THIS MAP WA5 PREPARED FROM AN ACT -UAL FIELD SURVEY MADE IN Lands NIF of Brett FetterACCORDANCE MTH THE FX15TING CODE Of PRACTICE ADOPTED BY THE NEWYORK STATE ASSOCIATION OF PROFESSIONAL LANDSURVEYOR5. COUNTY OF INARREN 5.) TH15 MAP 15 COPYRIGHT Q 2020 VAN DU5EN - STEVES LANDrer6ftheoou'rt)Kof Warren', SURZVEYOR5. UNAUTHORIZED ALTERATION OR ADDITION TO THISgo stee -if Nviv York, t)o HIFFIE-1EY fir. ttzz the rscor4nn" acectri'l, DOCUMENT 15 VIOLATION Of SECTION 720a, SUBDIVISION 2, OF NEW onInmyofficO. thQ tax0s Or' P(0,Pf'-,y Sk,;yvn YORK STATE EDUCATION LAW. A 10, G.) DIMENSIONS BETWEEN PROPERTY LINF5 AND STRUCTURES ARE TO THE pald or the yr.91a 1v4ed to 2Q '20''/ jd NFARE51'HALF fOOT AND ARE FOR THE SOLE PURPOSE Of INTERPRETING THEIR CONfOPMANCff WTH ZONING AND NOT INTENDED TO All) IN THE r5TA51.151-IMENT OR RETIRACEMENT Of PPOPEKFY LINES, Wwren County Trew- wer 7) Off f5ffT5 I3ffPAq!EN FROPERTY LINES AND STRUCTURES 5H6tvN HEREON Instr # 2020-3000049 09/1512020 0826:04 AM 1 Pages MAP ARE TO ROOF OVERHANGS UNLE55 OTHERW15E NOTED, 8.) UNDERGROUND UTILITIES, IF ANY, APE NOT SHOVv`N HEREOI,L F TO WHATEVER f GHT5, TITLE OR9.) THE SURVEYED PARCEL 15 5UBJEG l INTEREST THE TOWN Of QUEENS13UKY AND THE PEOPLE OF THE STATE Of NfW YORK MAY HAVE TO MAINTAIN THE ROADS, AND TO WHKI-EVER RIGHTS, TITLE OR INTffRE5T THE TRAVELING PU13LIC MAY HAVE TO THE 13FD Of THE ROADS. PLANNING BOARD APPROVAL Approved Under Authority KT' a Resolution Adopted M22_2--- 2020 by the Planning Board of the Towr of Queensbury, New York. Chairman A*AV Petroleum, Znc. B:5063 P:124 Zoning Znformation John W. Curran & Rosann M. Curran 2GG.3-1-75 CiRf Dated: March 28, 2003 Zoned MDR Recorded: April 11, 2003 Minimum Lot Size - 2 Acres Minimum Lot Frontage - 100' kqgend Front 3 Sided 2 Rear 3 ZRF = Zron Rod Found CZRF = Capped Zron Rod Found CH = Concrete Monument Found Utility Pole Well MEN"] 4--) 4 0 Z 0 Cr 0 0 MOO 0 Ch Fd Ct S-1 M a I Z M Pamela J. Vogel, Warren Co Clerk FILED SHEET I OF I Aronson DWO. NO. 20-011     5,'*(5'SITE DATA TOWN OF QUEENSBURY - WARREN COUNTY TAX ID # 266.3-1-76.1 PROPERTY CLASS: 210 - 1 FAMILY RES ONE ZONE: MDR TOTAL ACRES: 10.08 Project Details: System Size DC (kW): 25.92 54 Q-cells Q.PEAK DUO XL-G10.d 480 54 SolarEdge Technologies Inc. P505 *Inverters/Battery installed at Residence in Garage 1 SolarEdge Technologies Inc. SE11400H-US (PRISM) 240V 1 SolarEdge Technologies Inc. SE10000H-US 1 LG RESU16H Battery 1 SolarEdge Backup Interface Ground Mount Racking: Solar Foundations, USA Ground Screws (PE Certified & Constructed) - Construction documents enclosed Ground Mount Tilt: 30 Degrees Azimuth: 180 - S Ground Mount Configuration (N/S x E/W) 6x9 Max Height: 13.01' Total Square Feet: 1,204 sq. ft. APPLICANT: Kasselman Solar LLC 279 Broadway, BLDG. 2 Menands, NY 12204 ON BEHALF OF: Rory Russell 1516 Ridge Rd. Kattskill Bay, NY 12844 Date: /2022 SITE PLAN 1516 RIDGE RD. GROUND MOUNTED SOLAR INSTALLATION PROJECT 1516 RIDGE RD. KATTSKILL BAY, NY 12844 SHEET 1 OF 2 LEGEND: Setbacks Existing Trees/Vegetation: 025 50 SCALE:1:50 DRIVEWAY RESIDENCE 1 Story 3,687 sq.ft. PE STAMP: 400 ft 400 ft 420 ft Should the solar array be abandoned for any reason and no longer serves it's intended function, solar array shall be decommissioned within 90 days of solar array being non-operational. The decommissioning plan will ensure the site will be restored to a useful, nonhazardous condition without delay, including, but not limited to, the following: a.) Removal of aboveground and below-ground equipment, structures and foundations. b.) Restoration of the surface grade and soil after removal of equipment. c.) Re-vegetation of restored soil areas with native seed mixes, excluding any invasive species. 532' 150' 324' PROPOSED GROUND MOUNT SOLAR ARRAY SEPTIC LEACH FIELD ~ 240' ELECTRICAL CONDUIT RUN (BURIED NO LESS THAN 18") EXP:07/24 6-2-2022 Solar Foundations USA 1142 River Road, New Castle, DE 19720 Ph: (855) 738-7200 Fax: (866) 644-5665 Kasselman Solar LLC Project: Russell Residence 1516 Ridge Road Queensbury, NY 12804 Sheet 1 of 3 Date Revision Drawn By:Review By: Original05/04/2022 JD __________________________ N.T.S. PLAN VIEW JB Solar Foundations USA 1142 River Road, New Castle, DE 19720 Ph: (855) 738-7200 Fax: (866) 644-5665 Sheet 2 of 3 Date Revision Drawn By:Review By: ________________________SIDE ELEVATION DETAIL ________________________________________________________POST SPACING ELEVATION DETAIL _______________________ N.T.S LOWER CAP DETAIL _____________________UPPER CAP DETAIL ____________________HELICAL PILE DETAIL Original JDJB N.T.S N.T.S N.T.SN.T.S Kasselman Solar LLC Project: Russell Residence 1516 Ridge Road Queensbury, NY 12804 05/04/2022 Solar Foundations USA 1142 River Road, New Castle, DE 19720 Ph: (855) 738-7200 Fax: (866) 644-5665 Sheet 3 of 3 Date Revision Drawn By:Review By: Original JD _____________________________________ N.T.S. HELICAL PILE DETAIL JB Kasselman Solar LLC Project: Russell Residence 1516 Ridge Road Queensbury, NY 12804 05/04/2022 Column12Column1 Column2 Column3 Column4 Column5 Column6 Column7 Column8 Column9 Column10 Column11 3 3 Russell Residence 3 0'-0" 3 44"13'-9" 3 27'-6" 3 41'-3" 3 5'-4"2 spans of 5'-4"55'-0" 3 13'-9"13'-9"13'-9" 3 3 3 17'-1¾"18'-4" 3 3 123"55'-11¼" 3 3 3 3 3 55'-0" 3 53" 3 3 3 65'-8¼"Diagonal 3 6Lx9C sub-array 68'-2¼" 3 South Edge BREAKING THE 21 % EFFICIENCY BARRIER Q.ANTUM DUO Z Technology with zero gap cell layout boosts module efficiency up to 21.6 %. LOW ELECTRICITY GENERATION COSTS Higher yield per surface area, lower BOS costs and up to 80 watts more module power than standard 144 half-cell modules. ENDURING HIGH PERFORMANCE Long-term yield security with Anti LID Technology, Anti PID Technology1, Hot-Spot Protect and Traceable Quality Tra.Q™. EXTREME WEATHER RATING High-tech aluminium alloy frame, certified for high snow (5400 Pa) and wind loads (2400 Pa). A RELIABLE INVESTMENT Inclusive 12-year product warranty and 25-year linear performance warranty2. STATE OF THE ART MODULE TECHNOLOGY Q.ANTUM DUO combines cutting edge cell separation and innovative 12-busbar design with Q.ANTUM Technology. 1 APT test conditions according to IEC/TS 62804-1:2015, method B (−1500 V, 168 h) 2 See data sheet on rear for further information. THE IDEAL SOLUTION FOR: Ground-mounted solar power plants Q.PEAK DUO XL-G10.2 475-495 ENDURING HIGH PERFORMANCE PRELIMINARY 1045 mm 1308 mm 2216 mm 790 mm 35 mm 4 × Mounting slots (DETAIL A)8 × Drainage holes 3 × 6 mm Frame 1003 mm AU/ EN 454 mm Label 4 × Grounding holes, Ø 4.5 mm 4 × Drainage holes 700 mm 4 × Mounting slots system Tracker (DETAIL B) DETAIL A 16 mm 8.5 mm21 mm DETAIL B 10 mm 7 mm22 mm 1001 mm 350 mm 400 mm EN RELATIVE EFFICIENCYCOMPARED TO NOMINAL POWER [%]YEARS Q CELLS Industry standard for linear warranties* *Standard terms of guarantee for the 10 PV companies with the highest production capacity in 2014 (as at: September 2014) 100 95 90 85 80 155 2520010 98 86 200 400 600 800 1000 110 100 90 80RELATIVE EFFICIENCY [%]IRRADIANCE [W/m²] α [% / K]+0.04 β [% / K]−0.27 γ [% / K]−0.34 NMOT [°C]43 ± 3 475 480 485 490 495 [W]475 480 485 490 495 [A]11.24 11.26 11.29 11.31 11.34 [V]53.58 53.61 53.64 53.68 53.71 [A]10.66 10.71 10.76 10.81 10.86 [V]44.54 44.81 45.07 45.33 45.59 [%]≥ 20.5 ≥ 20.7 ≥ 20.9 ≥ 21.2 ≥ 21.4 [W]356.4 360.1 363.9 367.6 371.4 [A]9.05 9.07 9.09 9.12 9.14 [V]50.53 50.56 50.59 50.62 50.65 [A]8.39 8.43 8.47 8.52 8.56 [V]42.49 42.72 42.94 43.17 43.39 [V]1500 Class II [A]20 C / TYPE 1 [Pa]3600 / 1600 −40 °C - +85 °C [Pa]5400 / 2400 Hanwha Q CELLS GmbH Sonnenallee 17-21, 06766 Bitterfeld-Wolfen, Germany | TEL +49 (0)3494 66 99-23444 | FAX +49 (0)3494 66 99-23000 | EMAIL sales@q-cells.com | WEB www.q-cells.com Note: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation and use of this product. Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE At least 98 % of nominal power dur- ing first year. Thereafter max. 0.5 % degradation per year. At least 93.5 % of nominal power up to 10 years. At least 86 % of nominal power up to 25 years. All data within measurement toler- ances. Full warranties in accordance with the warranty terms of the Q CELLS sales organisation of your respective country. Typical module performance under low irradiance conditions in comparison to STC conditions (25 °C, 1000 W/m2).Specifications subject to technical changes © Q CELLS Q.PEAK DUO XL-G10.2_475-495_2021-01_Rev01_ENPROPERTIES FOR SYSTEM DESIGN Maximum System Voltage VSYS PV module classification Maximum Reverse Current IR Fire Rating based on ANSI / UL 61730 Max. Design Load, Push / Pull Permitted Module Temperature on Continuous DutyMax. Test Load, Push / Pull ELECTRICAL CHARACTERISTICS POWER CLASS MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC1 (POWER TOLERANCE +5 W / −0 W)MinimumPower at MPP1 PMPP Short Circuit Current1 ISC Open Circuit Voltage1 VOC Current at MPP I MPP Voltage at MPP VMPP Efficiency1 η MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NMOT2 MinimumPower at MPP PMPP Short Circuit Current ISC Open Circuit Voltage VOC Current at MPP I MPP Voltage at MPP VMPP 1Measurement tolerances PMPP ± 3 %; I SC; VOC ± 5 % at STC: 1000 W/m2, 25 ± 2 °C, AM 1.5 according to IEC 60904-3 • 2 800 W/m², NMOT, spectrum AM 1.5 MECHANICAL SPECIFICATION Format 2216 mm × 1045 mm × 35 mm (including frame) Weight 26.5 kg Front Cover 3.2 mm thermally pre-stressed glass with anti-reflection technology Back Cover Composite film Frame Anodised aluminium Cell 6 × 26 monocrystalline Q.ANTUM solar half cells Junction box 53-101 mm × 32-60 mm × 15-18 mm Protection class IP67, with bypass diodes Cable 4 mm² Solar cable; (+) ≥ 700 mm, (−) ≥ 350 mm* Connector Stäubli MC4-Evo2, Hanwha Q CELLS HQC4; IP68 *Long cables (+) ≥ 1450 mm, (−) ≥ 1450 mm for landscape installation are available upon request. TEMPERATURE COEFFICIENTS Temperature Coefficient of ISC Temperature Coefficient of VOC Temperature Coefficient of PMPP Nominal Module Operating Temperature QUALIFICATIONS AND CERTIFICATES IEC 61215:2016; IEC 61730:2016. This data sheet complies with DIN EN 50380. Certification in process.PRELIMINARY STOREDGE®solaredge.com Optimized battery storage with HD-Wave technology Record-breaking 99% weighted efficiency with 200% DC oversizing Integrated arc fault protection and rapid shutdown for NEC 2014 and 2017, per article 690.11 and 690.12 Embedded revenue grade production data, ANSI C12.20 Class 0.5 Small, lightweight, and easy to install Modular design, future ready with optional upgrades to: DC-coupled storage for full or partial home backup Built-in consumption monitoring Direct connection to the SolarEdge smart EV charger Multi-inverter, scalable StorEdge® solution Single Phase Energy Hub Inverter with Prism Technology for North America SE3000H-US / SE3800H-US / SE6000H-US / SE7600H-US 12-25 YEARWARRANTY SE3000H-US SE3800H-US SE6000H-US SE7600H-US UNITS OUTPUT - AC ON GRID Rated AC Power 3000 3800 6000 7600 W Maximum AC Power Output 3000 3800 6000 7600 W AC Output Voltage Range 211-264 Vac AC Frequency Range (min - nom - max)59.3 - 60 - 60.5(2)Hz Maximum Continuous Output Current 12.5 16 25 32 A GFDI Threshold 1 A Total Harmonic Distortion (THD)<3 % Power Factor 1, adjustable -0.85 to 0.85 Utility Monitoring, Islanding Protection, Country Configurable Thresholds Yes Charge Battery from AC (if Allowed)Yes Typical Nighttime Power Consumption <2.5 W OUTPUT - AC BACKUP(3) Rated AC Power in Backup Operation 2400 3050 4800 6100 W Peak AC Power (<10 sec) in Backup Operation 2700 3400 5400 6900 W AC L-L Output Voltage Range in Backup 211-264 Vac AC L-N Output Voltage Range in Backup 105-132 Vac AC Frequency Range in Backup (min - nom - max)55 - 60 - 65 Hz Maximum Continuous Output Current in Backup Operation 10 12.7 20 25.5 A Peak AC Current (<10sec) in Backup Operation 11.25 14.2 22.5 30 A GFDI 1 A THD <5 % OUTPUT - SMART EV CHARGER AC Rated AC Power 9,600 W AC Output Voltage Range 211-264 Vac AC Frequency Range (min - nom - max) 59.3-60-60.5 Hz Maximum Continuous Output Current @240V (grid, PV and battery)40 Aac INPUT - DC (PV AND BATTERY) Transformer-less, Ungrounded Yes Max Input Voltage 480 Vdc Nom DC Input Voltage 380 400 Vdc Reverse-Polarity Protection Yes Ground-Fault Isolation Detection 600kΩ Sensitivity INPUT - DC (PV) Maximum DC Power 6000 7600 12000 15600 W Maximum Input Current(4)8.5 10.5 16.5 20 Adc Max. Input Short Circuit Current 45 Adc Maximum Inverter Efficiency 99.2 % CEC Weighted Efficiency 99 % 2-pole Disconnection Yes INPUT - DC (BATTERY) Supported Battery Types LG Chem RESU10H Number of Batteries per Inverter 1 or 2(5) Maximum Battery Capacity per Inverter 19.6 kWh Continuous Power Per Inverter 5000 W Peak Power 6900 W Max Input Current @240V 18 Adc 2-pole Disconnection Yes Single Phase Energy Hub Inverterwith Prism Technology for North America SE3000H-US / SE3800H-US / SE6000H-US / SE7600H-US(1) SMART ENERGY CAPABILITIES Consumption Metering Built-in(6) Battery Storage With Backup Interface for service up to 200A; Up to 3 inverters, 15kW backup power, and 60kWh backup capacity EV Charging Direct connection to Smart EV charger ADDITIONAL FEATURES Supported Communication Interfaces RS485, Ethernet, Wi-Fi (optional), Cellular Revenue Grade Metering, ANSI C12.20 Built - in(6) Integrated AC, DC and Communication Connection Unit Yes Inverter Commissioning with the SetApp mobile application using built-in Wi-Fi Access Point for local connection DC Voltage Rapid Shutdown (PV and Battery)Yes, according to NEC 2014 and 2017 690.12 STANDARD COMPLIANCE Safety UL1741, UL1741 SA, UL1699B, UL1998, UL9540, CSA 22.2 Grid Connection Standards IEEE1547, Rule 21, Rule 14H Emissions FCC part15 class B INSTALLATION SPECIFICATIONS AC Output Conduit Size / AWG Range 3/4'' maximum / 14-8 AWG 1'' maximum / 14-6 AWG EV AC Output Conduit Size / AWG Range 3/4'' maximum / 14-8 AWG 1'' maximum / 14-6 AWG DC Input (PV) Conduit Size / AWG Range 3/4'' maximum / 14-8 AWG 1'' maximum / 14-6 AWG DC Input (Battery) Conduit Size / AWG Range 3/4'' maximum / 14-8 AWG 1'' maximum / 14-6 AWG Dimensions with Connection Unit (HxWxD)17.7 X 14.6 X 6.8 / 450 X 370 X 174 in / mm Weight with Connection Unit 26 / 11.8 30.2 / 13.7 lb / kg Noise < 25 dBA Cooling Natural Convection Operating Temperature Range -40 to +140 / -40 to +60(7)˚F / ˚C Protection Rating NEMA 4X © SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 06/2020/V01/ENG NAM. Subject to change without notice. (1) These specifications apply to inverters with part numbers SExxxxH-USS3xxxxx or SE7600H-USSSHxxxx and connection unit model number DCD-1PH-US-PxH-F-x (2) For other regional settings please contact SolarEdge support (3) Not designed for standalone applications and requires AC for commissioning (4) A higher current source may be used; the inverter will limit its input current to the values stated (5) When connecting two LG Chem RESU batteries, each battery must have a different part number (6) For consumption metering current transformers should be ordered separately: SEACT0750-200NA-20 or SEACT0750-400NA-20. 20 units per box. (7) Full power up to at least 50°C / 122°F; for power de-rating information refer to: https://www.solaredge.com/sites/default/files/se-temperature-derating-note-na.pdf Connecting CTs to the Revenue Grade and Consumption Meter Single Phase Energy Hub Inverter with Prism Technology Grid Single Phase Energy Hub Inverterwith Prism Technology for North America SE3000H-US / SE3800H-US / SE6000H-US / SE7600H-US(1) POWER OPTIMIZERsolaredge.com PV power optimization at the module-level Specifically designed to work with SolarEdge inverters Up to 25% more energy Flexible system design for maximum space utilization Fast installation with a single bolt Next generation maintenance with module- level monitoring Meets NEC requirements for arc fault protection (AFCI) and Photovoltaic Rapid Shutdown System (PVRSS) Module-level voltage shutdown for installer and firefighter safety Superior efficiency (99.5%) Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading Power Optimizer For North America P320 / P340 / P370 / P400 / P401 / P405 / P485 / P505 25 YEARWARRANTY © SolarEdge Technologies Ltd. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 07/2020/V02/ENG NAM. Subject to change without notice. (6) For detailed string sizing information refer to: http://www.solaredge.com/sites/default/files/string_sizing_na.pdf(7) It is not allowed to mix P405/P485/P505 with P320/P340/P370/P400/P401 in one string(8) A string with more than 30 optimizers does not meet NEC rapid shutdown requirements; safety voltage will be above the 30V requirement(9) For 208V grid: it is allowed to install up to 7,200W per string when the maximum power difference between each string is 1,000W(10) For 277/480V grid: it is allowed to install up to 15,000W per string when the maximum power difference between each string is 2,000W Power Optimizer For North America P320 / P340 / P370 / P400 / P401 / P405 / P485 / P505 Optimizer model (typical module compatibility) P320 (for 60-cell modules) P340 (for high- power 60-cell modules) P370(for higher-power60 and 72-cellmodules) P400 (for 72 & 96-cell modules) P401 (for high power 60 and 72 cell modules) P405 (for high-voltage modules) P485 (for high-voltage modules) P505 (for highercurrent modules) INPUT Rated Input DC Power(1)320 340 370 400 405 485 505 W Absolute Maximum Input Voltage (Voc at lowest temperature) 48 60 80 60 125(2)83(2)Vdc MPPT Operating Range 8 - 48 8 - 60 8 - 80 8-60 12.5 - 105 12.5 - 83 Vdc Maximum Short Circuit Current (Isc) 11 10.1 11.75 11 14 Adc Maximum Efficiency 99.5 % Weighted Efficiency 98.8 98.6 % Overvoltage Category II OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER) Maximum Output Current 15 Adc Maximum Output Voltage 60 85 Vdc OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF) Safety Output Voltage per Power Optimizer 1 ± 0.1 Vdc STANDARD COMPLIANCE EMC FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3 Safety IEC62109-1 (class II safety), UL1741 Material UL94 V-0 , UV Resistant RoHS Yes INSTALLATION SPECIFICATIONS Maximum Allowed System Voltage 1000 Vdc Compatible inverters All SolarEdge Single Phase and Three Phase inverters Dimensions (W x L x H)129 x 153 x 27.5 / 5.1 x 6 x 1.1 129 x 153 x 33.5 / 5.1 x 6 x 1.3 129 x 153 x 29.5 /5.1 x 6 x 1.16 129 x 159 x 49.5 / 5.1 x 6.3 x 1.9 129 x 162 x 59 / 5.1 x 6.4 x 2.3 mm / in Weight (including cables)630 / 1.4 750 / 1.7 655 / 1.5 845 / 1.9 1064 / 2.3 gr / lb Input Connector MC4(3)Single or dual MC4(3)(4)MC4(3) Input Wire Length 0.16 / 0.52 m / ft Output Wire Type / Connector Double Insulated / MC4 Output Wire Length 0.9 / 2.95 1.2 / 3.9 m / ft Operating Temperature Range(5) -40 - +85 / -40 - +185 ˚C / ˚F Protection Rating IP68 / NEMA6P Relative Humidity 0 - 100 % (1) Rated power of the module at STC will not exceed the optimizer “Rated Input DC Power”. Modules with up to +5% power tolerance are allowed(2) NEC 2017 requires max input voltage be not more than 80V(3) For other connector types please contact SolarEdge(4) For dual version for parallel connection of two modules use P485-4NMDMRM. In the case of an odd number of PV modules in one string, installing one P485 dual version power optimizer connected to one PV module. When connecting a single module seal the unused input connectors with the supplied pair of seals.(5) For ambient temperature above +85°C / +185°F power de-rating is applied. Refer to Power Optimizers Temperature De-Rating Technical Note for more details. PV System Design Using a SolarEdge Inverter(6)(7) Single Phase HD-Wave Single phase Three Phase for 208V grid Three Phase for 277/480V grid Minimum String Length (Power Optimizers) P320, P340, P370, P400, P401 8 10 18 P405, P485, P505 6 8 14 Maximum String Length (Power Optimizers)25 25 50(8) Maximum Power per String 5700 (6000 with SE7600-US - SE11400-US)5250 6000(9)12750(10)W Parallel Strings of Different Lengths or Orientations Yes